Next: , Previous: Reading and writing random number generator state, Up: Random Number Generation

17.9 Random number generator algorithms

The functions described above make no reference to the actual algorithm used. This is deliberate so that you can switch algorithms without having to change any of your application source code. The library provides a large number of generators of different types, including simulation quality generators, generators provided for compatibility with other libraries and historical generators from the past.

The following generators are recommended for use in simulation. They have extremely long periods, low correlation and pass most statistical tests.

— Generator: gsl_rng_mt19937

The MT19937 generator of Makoto Matsumoto and Takuji Nishimura is a variant of the twisted generalized feedback shift-register algorithm, and is known as the “Mersenne Twister” generator. It has a Mersenne prime period of 2^19937 - 1 (about 10^6000) and is equi-distributed in 623 dimensions. It has passed the diehard statistical tests. It uses 624 words of state per generator and is comparable in speed to the other generators. The original generator used a default seed of 4357 and choosing s equal to zero in gsl_rng_set reproduces this.

For more information see,

The generator gsl_rng_mt19937 uses the second revision of the seeding procedure published by the two authors above in 2002. The original seeding procedures could cause spurious artifacts for some seed values. They are still available through the alternative generators gsl_rng_mt19937_1999 and gsl_rng_mt19937_1998.

— Generator: gsl_rng_ranlxs0
— Generator: gsl_rng_ranlxs1
— Generator: gsl_rng_ranlxs2

The generator ranlxs0 is a second-generation version of the ranlux algorithm of Lüscher, which produces “luxury random numbers”. This generator provides single precision output (24 bits) at three luxury levels ranlxs0, ranlxs1 and ranlxs2. It uses double-precision floating point arithmetic internally and can be significantly faster than the integer version of ranlux, particularly on 64-bit architectures. The period of the generator is about 10^171. The algorithm has mathematically proven properties and can provide truly decorrelated numbers at a known level of randomness. The higher luxury levels provide increased decorrelation between samples as an additional safety margin.

— Generator: gsl_rng_ranlxd1
— Generator: gsl_rng_ranlxd2

These generators produce double precision output (48 bits) from the ranlxs generator. The library provides two luxury levels ranlxd1 and ranlxd2.

— Generator: gsl_rng_ranlux
— Generator: gsl_rng_ranlux389

The ranlux generator is an implementation of the original algorithm developed by Lüscher. It uses a lagged-fibonacci-with-skipping algorithm to produce “luxury random numbers”. It is a 24-bit generator, originally designed for single-precision IEEE floating point numbers. This implementation is based on integer arithmetic, while the second-generation versions ranlxs and ranlxd described above provide floating-point implementations which will be faster on many platforms. The period of the generator is about 10^171. The algorithm has mathematically proven properties and it can provide truly decorrelated numbers at a known level of randomness. The default level of decorrelation recommended by Lüscher is provided by gsl_rng_ranlux, while gsl_rng_ranlux389 gives the highest level of randomness, with all 24 bits decorrelated. Both types of generator use 24 words of state per generator.

For more information see,

— Generator: gsl_rng_cmrg

This is a combined multiple recursive generator by L'Ecuyer. Its sequence is,

          z_n = (x_n - y_n) mod m_1

where the two underlying generators x_n and y_n are,

          x_n = (a_1 x_{n-1} + a_2 x_{n-2} + a_3 x_{n-3}) mod m_1
          y_n = (b_1 y_{n-1} + b_2 y_{n-2} + b_3 y_{n-3}) mod m_2

with coefficients a_1 = 0, a_2 = 63308, a_3 = -183326, b_1 = 86098, b_2 = 0, b_3 = -539608, and moduli m_1 = 2^31 - 1 = 2147483647 and m_2 = 2145483479.

The period of this generator is lcm(m_1^3-1, m_2^3-1), which is approximately 2^185 (about 10^56). It uses 6 words of state per generator. For more information see,

— Generator: gsl_rng_mrg

This is a fifth-order multiple recursive generator by L'Ecuyer, Blouin and Coutre. Its sequence is,

          x_n = (a_1 x_{n-1} + a_5 x_{n-5}) mod m

with a_1 = 107374182, a_2 = a_3 = a_4 = 0, a_5 = 104480 and m = 2^31 - 1.

The period of this generator is about 10^46. It uses 5 words of state per generator. More information can be found in the following paper,

— Generator: gsl_rng_taus
— Generator: gsl_rng_taus2

This is a maximally equidistributed combined Tausworthe generator by L'Ecuyer. The sequence is,

          x_n = (s1_n ^^ s2_n ^^ s3_n)


          s1_{n+1} = (((s1_n&4294967294)<<12)^^(((s1_n<<13)^^s1_n)>>19))
          s2_{n+1} = (((s2_n&4294967288)<< 4)^^(((s2_n<< 2)^^s2_n)>>25))
          s3_{n+1} = (((s3_n&4294967280)<<17)^^(((s3_n<< 3)^^s3_n)>>11))

computed modulo 2^32. In the formulas above ^^ denotes “exclusive-or”. Note that the algorithm relies on the properties of 32-bit unsigned integers and has been implemented using a bitmask of 0xFFFFFFFF to make it work on 64 bit machines.

The period of this generator is 2^88 (about 10^26). It uses 3 words of state per generator. For more information see,

The generator gsl_rng_taus2 uses the same algorithm as gsl_rng_taus but with an improved seeding procedure described in the paper,

The generator gsl_rng_taus2 should now be used in preference to gsl_rng_taus.

— Generator: gsl_rng_gfsr4

The gfsr4 generator is like a lagged-fibonacci generator, and produces each number as an xor'd sum of four previous values.

          r_n = r_{n-A} ^^ r_{n-B} ^^ r_{n-C} ^^ r_{n-D}

Ziff (ref below) notes that “it is now widely known” that two-tap registers (such as R250, which is described below) have serious flaws, the most obvious one being the three-point correlation that comes from the definition of the generator. Nice mathematical properties can be derived for GFSR's, and numerics bears out the claim that 4-tap GFSR's with appropriately chosen offsets are as random as can be measured, using the author's test.

This implementation uses the values suggested the example on p392 of Ziff's article: A=471, B=1586, C=6988, D=9689.

If the offsets are appropriately chosen (such as the one ones in this implementation), then the sequence is said to be maximal; that means that the period is 2^D - 1, where D is the longest lag. (It is one less than 2^D because it is not permitted to have all zeros in the ra[] array.) For this implementation with D=9689 that works out to about 10^2917.

Note that the implementation of this generator using a 32-bit integer amounts to 32 parallel implementations of one-bit generators. One consequence of this is that the period of this 32-bit generator is the same as for the one-bit generator. Moreover, this independence means that all 32-bit patterns are equally likely, and in particular that 0 is an allowed random value. (We are grateful to Heiko Bauke for clarifying for us these properties of GFSR random number generators.)

For more information see,