------------------------------------------------------------------------------
GNU's Bulletin June, 1994
The GNU's Bulletin is the semi-annual newsletter of the Free Software Foundation, bringing you news about the GNU Project.
Free Software Foundation, Inc. Telephone: +1--617--876--3296
675 Massachusetts Avenue Fax: +1--617--492--9057
Cambridge, MA 02139-3309 Fax (in Japan):
USA 0031--13--2473 (KDD)
Electronic mail: gnu@prep.ai.mit.edu
0066--3382--0158 (IDC)
------------------------------------------------------------------------------
Michael Bushnell continues to work on the Hurd, while also
maintaining tar
.
Roland McGrath maintains make
and the GNU C library, and is
now working on the Hurd.
Jan Brittenson is working on the Hurd network server.
Karl Heuer has come on board to maintain and enhance GNU Emacs.
Omar Richardson-Sutherland is coordinating the GNU Dictionary
Project (see section Announcing the Dictionary Project).
Noah Friedman is our system ambiguator, release coordinator, and maintains a few programs in his copious spare time. Carl Hoffman is our fundraiser and conference organizer.
Robert J. Chassell is again our Treasurer, replacing Lisa `Opus' Goldstein, who is on her way to China (`finally!', she says). Lisa Bloch is our new Executive Director, taking over from Lisa Goldstein. Britton Bradley and Larissa Carlson assist Lisa Bloch with many tasks in the Business Office. Charles Hannum works on typesetting and many other jobs.
Jim Blandy has left to adapt GNU Emacs for use by the University of Illinois' Ribosome Database Project; he is also working on free, Scheme-based drawing software. Melissa Weisshaus and Tom Lord have also left the FSF. All still volunteer part-time.
Richard Stallman continues as a volunteer who does countless tasks, such as Emacs maintenance. Volunteer Len Tower remains our online JOAT (jack-of-all-trades), handling mailing lists and gnUSENET, information requests, etc.
Written and Edited by: Melissa Weisshaus, Noah S. Friedman,
Robert J. Chassell, and Leonard H. Tower Jr.
Illustrations by: Etienne Suvasa and Jamal Hannah
Japanese Edition by: Mieko Hikichi and Nobuyuki Hikichi
ISSN (International Standard Serial Number): 1075-7813
The GNU's Bulletin is published at the end of January and June of each year. Please note that there is no postal mailing list. To get a copy, send your name and address with your request to the address on page 1. Enclosing a business sized self-addressed stamped envelope ($0.52) and/or a donation of a few dollars is appreciated but not required. If you're from outside the USA, sending a mailing label and enough International Reply Coupons for a package of about 100 grams is appreciated but not required. (Including a few extra International Reply Coupons for copying costs is also appreciated.)
Copyright (C) 1994 Free Software Foundation, Inc.
Permission is granted to anyone to make or distribute verbatim copies of this document, in any medium, provided that the copyright notice and permission notice are preserved, and that the distributor grants the recipient permission for further redistribution as permitted by this notice.
------------------------------------------------------------------------------
We don't have a patent on irony and satire; those tools are available for you to use in your own work.
- Guerrilla Girls, a New York City performance group
------------------------------------------------------------------------------
The Free Software Foundation is dedicated to eliminating restrictions on people's right to use, copy, modify, and redistribute computer programs. We promote the development and use of free software in all areas using computers. Specifically, we are putting together a complete, integrated software system named "GNU" ("GNU's Not Unix", pronounced "guh-new") that will be upwardly compatible with Unix. Most parts of this system are already being used and distributed.
The word "free" in our name refers to freedom, not price. You may or may not pay money to get GNU software, but regardless you have two specific freedoms once you get it: first, the freedom to copy a program and give it away to your friends and co-workers; and second, the freedom to change a program as you wish, by having full access to source code. You can study the source and learn how such programs are written. You may then be able to port it, improve it, and share your changes with others. If you redistribute GNU software you may charge a distribution fee or give it away, so long as you include the source code and the GPL; see section What Is Copyleft?, for details.
Other organizations distribute whatever free software happens to be available. By contrast, the Free Software Foundation concentrates on the development of new free software, working towards a GNU system complete enough to eliminate the need to purchase a proprietary system.
Besides developing GNU, the FSF distributes GNU software and manuals for a distribution fee and accepts gifts (tax-deductible in the U.S.) to support GNU development. Most of the FSF's funds come from this distribution service.
The Board of the Foundation is: Richard M. Stallman, President;
Robert J. Chassell, Secretary/Treasurer; Gerald J. Sussman,
Harold Abelson, and Leonard H. Tower Jr., Directors.
The simplest way to make a program free is to put it in the public domain, uncopyrighted. But this permits proprietary modifications, denying others the freedom to use and redistribute improvements; it is contrary to the intent of increasing the total amount of free software. To prevent this, copyleft uses copyrights in a novel manner. Typically copyrights take away freedoms; copyleft preserves them. It is a legal instrument that requires those who pass on a program to include the rights to use, modify, and redistribute the code; the code and rights become legally inseparable.
The copyleft used by the GNU Project is made from the combination of a regular copyright notice and the GNU General Public License (GPL). The GPL is a copying license which basically says that you have the aforementioned freedoms. An alternate form, the GNU Library General Public License (LGPL), applies to a few GNU libraries. This license permits linking the libraries into proprietary executables under certain conditions. The appropriate license is included in all GNU source code distributions and many manuals. Printed copies are available upon request.
We strongly encourage you to copyleft your programs and documentation, and we have made it as simple as possible for you to do so. The details on how to apply either license appear at the end of each license.
GNU is to be a complete integrated computational environment: everything you need to work with a computer, either as a programmer or as a person in an office or home. The core is an operating system, which consists of a central program called a kernel that runs the other programs on the computer, and a large number of ancillary programs for handling files, etc. The FSF is developing an advanced kernel called the Hurd (see section What Is the Hurd?).
A complete system has tools for programmers, such as compilers and debuggers. It also has editors, sketchpads, calendars, calculators, spreadsheets, databases, electronic mail readers, and Internet navigators. The FSF already distributes most of the programs used in an operating system, all the tools regularly used by programmers, and much more.
Already, you can set yourself up as an entrepreneur to sell your services teaching, installing, improving, and modifying this software for others. Already, you can set yourself up as a programmer or writer who works on a 80386 or 80486 based computer and use only software that is freely redistributable. Already, all the tools you need as a programmer for editing, compiling, and debugging are free; all the tools you need as a writer for editing, revising, and typesetting a book are free; many tools you need for calculations or mathematics are free; and many games and other applications are free. Tools for electronic communications are free.
Not only are these tools useful to you, they are useful institutionally. Since distribution is free, you can pass on copies to other people in your company or organization without hindrance. No paperwork. As a teacher, you can give programs to your students without fearing that you are breaking the law. As a student, you can copy programs for your friends, and do good by doing so. If you are poor, you can copy and use the same software used by the rich; and if you are rich, you can contribute your improvements to the common heritage. If you are ignorant, you can learn. If you know a great deal, you can help others.
The Hurd will be the foundation of the whole GNU system. It is built on top of the Mach 3.0 kernel, a free message-passing kernel developed by CMU. Mach's virtual memory management and message-passing facilities are extensively used by the Hurd. The GNU C Library will provide the Unix system call interface, and will call the Hurd for needed services it can't provide itself.
One goal of the Hurd is to establish a framework for shared development and maintenance. The Hurd is like GNU Emacs in that it will allow a broad range of users to create and share useful projects without knowing much about the internal workings of the system--projects that might never have been attempted without freely available source, a well-designed interface, and a multiserver-based design.
Currently there are free ports of the Mach kernel to the 386 PC, the DEC
PMAX workstation, the Luna 88k, and several other machines, with more in
progress, including the Amiga and DEC Alpha-3000 machines. Contact CMU
c/o mach@cs.cmu.edu
, if you want to help with one of these or
start your own. Porting the GNU Hurd and GNU C Library is easy (easier
than porting GNU Emacs, certainly easier than porting GCC) once a Mach port
to a particular platform exists.
Important progress has been made recently; see section GNUs Flashes.
There are significant projects relating to the Hurd for which we need
volunteers. Experienced system programmers who are interested should send
mail to gnu@prep.ai.mit.edu
. Porting the Mach kernel or the
GNU C Library to new systems is another way to help development of the
Hurd.
by Richard Stallman
Austin Code Works, a redistributor of free software, has agreed to support free software development by giving the FSF 20% of the selling price for the GNU software packages they produce and sell.
The Sun Users Group Deutschland has agreed to add a donation to the FSF to the price of their next CD-ROM of GNU software. Potential purchasers will know precisely how much is for the FSF and how much is for SUGD.
In the long run, the success of free software depends on how much new free software people develop. Free software distribution offers an opportunity to raise funds for such development in an ethical way. These two redistributors have made use of the opportunity. Many others let it go to waste.
You can help promote free software development by convincing for-a-fee redistributors to contribute--either by doing development themselves, or by donating to development organizations (the FSF and others).
The way to convince distributors to contribute is to demand and expect this of them. This means choosing among distributors partly by how much they give to free software development. Then you can show distributors they must compete to be the one who gives the most.
To make this work, you must insist on numbers that you can compare, such as, "We will give ten dollars to the Foobar project for each disk sold." A vague commitment, such as "A portion of the profits are donated", doesn't give you a basis for comparison. Even a precise fraction "of the profits from this disk" is not very meaningful, since creative accounting and unrelated business decisions can greatly alter what fraction of the sales price counts as profit.
Also, press developers for firm information about what kind of development they do or support. Some kinds make much more long-term difference than others. For example, maintaining a separate version of a GNU program contributes very little; maintaining a program on behalf of the GNU project contributes much. Easy new ports contribute little, since someone else would surely do them; difficult ports such as adding a new CPU to the GNU compiler contribute more; major new features and programs contribute the most.
By establishing the idea that supporting further development is "the proper thing to do" when distributing free software for a fee, we can assure a steady flow of resources for making more free software.
When choosing a free software business, ask those you are considering how much they do to assist free software development, e.g., by contributing money to free software development or by writing free software improvements themselves for general use. By basing your decision partially on this factor, you can help encourage those who profit from free software to contribute to its growth.
These free software support companies regularly donate a part of their income to the Free Software Foundation to support the development of new GNU programs. Listing them here is our way of thanking them. Also see section Cygnus Matches Donations!.
Contributed Software GbR Graefestr. 76 D-10967 Berlin Germany Telephone: (+49-30) 694-69-07 Fax: (+49-30) 694-68-09 Electronic-Mail:info@contrib.de
BBS & no-charge free software archive: Dialins: (+49-30) 693-40-51 (eight USR DS's) (+49-30) 694-60-55 (five ZyXELs) Telnet:uropax.contrib.de
[192.109.39.2] FTP:ftp.contrib.de
WWW: `http://www.contrib.de/'
Hundred Acre Consulting 5301 Longley Lane, Suite D-144 Reno, NV 89511 USA Telephone: 702-829-9700 +1-800-245-2885 Fax: 702-829-9926 Electronic-Mail:info@pooh.com
FTP:ftp.pooh.com
WWW: `http://www.pooh.com/' Gopher:gopher.pooh.com
The Free Software Foundation does not provide any technical support. Although we create software, we leave it to others to earn a living providing support. We see programmers as providing a service, much as doctors and lawyers now do; both medical and legal knowledge are freely redistributable entities for which the practitioners charge a distribution and service fee.
The GNU Service Directory is a list of people who offer support
and other consulting services. It is in the file `etc/SERVICE' in the
GNU Emacs distribution, `SERVICE' in the GCC distribution and
`/pub/gnu/GNUinfo/SERVICE' on GNU's FTP host
prep.ai.mit.edu
. Contact us if you would like a copy or wish to
be listed in it. Those companies who share their income with the FSF are
listed in section Help from Free Software Companies.
If you find a deficiency in any GNU software, we want to know. We have
many Internet mailing lists for bug reports, announcements and questions.
They are also gatewayed into USENET news as the gnu.*
newsgroups.
You can request a list of the mailing lists from either address on
the top menu.
When we receive a bug report, we usually try to fix the problem. While our bug fixes may seem like individual assistance, they are not. Our task is so large that we must focus on that which helps the community as a whole; we do not have the resources to help individuals. We may send you a patch for a bug so that you can help us test the fix and ensure its quality. If your bug report does not evoke a solution from us, you may still get one from another user who reads our bug report mailing lists. Otherwise, use the Service Directory.
Please do not ask us to help you install software or figure out how to use it--but do tell us how an installation script does not work or where documentation is unclear.
If you have no Internet access, you can get mail and USENET news via UUCP. Contact a local UUCP site, or a commercial UUCP site such as:
UUNET Communications Services
3110 Fairview Park Drive -- Suite 570
Falls Church, VA 22042
USA
Telephone: +1-800-4UUNET4
+1-703-204-8000
Fax: +1-703-204-8001
Electronic-Mail: info@uunet.uu.net
A list of commercial UUCP and Internet service providers is posted
periodically to USENET in the newsgroup news.announce.newusers
with
`Subject: How to become a USENET site'. You can also get it via
anonymous FTP from rtfm.mit.edu
in the file
`How_to_become_a_USENET_site', in the directory
`/pub/usenet-by-group/news.announce.newusers'.
When choosing a service provider, ask those you are considering how much they do to assist free software development, e.g., by contributing money to free software development or by writing free software improvements themselves for general use. By basing your decision partially on this factor, you can help encourage those who profit from free software to contribute to its growth.
The League for Programming Freedom (LPF) aims to protect the freedom to write software. This freedom is threatened by "look-and-feel" interface copyright lawsuits and by software patents. The LPF does not endorse free software or the FSF.
The League's members include programmers, entrepreneurs, students, professors, and even software companies.
From the League membership form:
The League for Programming Freedom is a grass-roots organization of professors, students, business people, programmers, and users dedicated to bringing back the freedom to write programs. The League is not opposed to the legal system that Congress intended--copyright on individual programs. Our aim is to reverse the recent changes made by judges in response to special interests.
Membership dues in the League are $42 per year for programmers, managers and professionals; $10.50 for students; $21 for others.
To join, please send a check and the following information:
The League is not connected with the Free Software Foundation and is not itself a free software organization. The FSF supports the LPF because, like any software developer smaller than IBM, it is endangered by software patents. You are in danger too! It would be easy to ignore the problem until you or your employer is sued, but it is more prudent to organize before that happens.
If you haven't made up your mind yet, write to LPF for more information:
League for Programming Freedom
1 Kendall Square - #143
P.O. Box 9171
Cambridge, MA 02139
USA
Telephone: +1-617-243-4091
Electronic-Mail: lpf@uunet.uu.net
Mieko (h-mieko@sra.co.jp
) and Nobuyuki Hikichi
(hikichi@sra.co.jp
) continue to volunteer for the GNU
Project in Japan. They translate each issue of this Bulletin into
Japanese and distribute it widely, along with their translation of the
GNU General Public License Version 2. This translation of the GPL is
authorized by the FSF and is available by anonymous FTP from
srawgw.sra.co.jp
in /pub/gnu/local-fix/GPL2-j
.
They are working on a formal translation of the GNU Library General
Public License. They also solicit donations and offer GNU software
consulting.
nepoch
(the Japanese versions of Epoch) and MULE are available and
widely used in Japan. MULE (the MULtilingual Enhancement of GNU Emacs) can
handle many character sets at once. Eventually its features will be merged
into the FSF's version of Emacs. The FSF does not distribute
nepoch
, but MULE is available on the section May 1994 Source Code CD-ROM. You
can also FTP it from sh.wide.ad.jp
in /JAPAN/mule
or
etlport.etl.go.jp
in /pub/mule
. See section GNU Software,
for more information about MULE.
The Village Center, Inc. prints a Japanese translation of the GNU Emacs Lisp Reference Manual and uploads the Texinfo source to various bulletin boards. They have also published a copylefted book, Nobuyuki's and Mieko's Think GNU. This appears to be the first non-FSF copylefted publication in Japan. Part of the profits are donated to the FSF. Their address is:
Village Center, Inc. 3-2 Kanda Jinbo-cho, Chiyoda-ku Tokyo 101, Japan Telephone: 03-3221-3520
Addison-Wesley Publishers Japan Ltd. has printed a Japanese translation of the GNU Make Manual and GAWK Manual. Their address is:
Addison-Wesley Publishers Japan Ltd. Nichibou Bldg. 2F 1-2-2 Sarugaku-cho, Chiyoda-ku Tokyo 101, Japan Telephone: 03-3291-4581
GNU manuals (in English), T-shirts and CD-ROMs are available from both:
Shosen Book Tower 1-11-6 Kanda Sakuma-cho, Chiyoda-ku Tokyo 101, Japan Telephone: 03-5296-0051 Shosen Grande 1-3 Kanda Jinbo-cho, Chiyoda-ku Tokyo 101, Japan Telephone: 03-3295-0011
The Institute for New Generation Computer Technology, ICOT, has released
the "ICOT Free Software (IFS)" distribution. The famous Fifth Generation
Computing System project produced this distribution, which includes over 80
systems for symbol processing, knowledge processing, problem solving,
inference, and natural language processing. Many of them are based on
parallel logic programming. For details, contact
ifs@icot.or.jp
.
There is a mailing list in Japan to discuss both hardware and software
which is under the GNU General Public License. This list provides
information about making your own computer system. The main language used
on the list is Japanese. If you are interested in getting information or
having discussions in English, contact mka@apricot.juice.or.jp
or ishiz@muraoka.info.waseda.ac.jp
.
Many groups in Japan now distribute GNU software. They include JUG, a PC user group; ASCII, a periodical and book publisher; the Fujitsu FM Towns users group; and SRA's special GNU support group, called Wingnut, who also purchased the first Deluxe package in Japan. (Since then, there have been several other purchases of the Deluxe package in Japan.)
Anonymous UUCP is available until the end of December, 1994. After that it
will be canceled due to a lack of disk space, time and the ease with which
GNU software can be obtained via FTP and on CD-ROM and other media. Since
the service was started 5 years ago, over 300 tapes have been made, and
over 600 hosts have made more than 20,000 calls to the UUCP server to get
GNU and other free software. For more information, contact
toku@dit.co.jp
.
It is easy to place an order directly with the FSF from Japan, thus funding
new code. To get an FSF Order Form written in Japanese, ask
japan-fsf-orders@prep.ai.mit.edu
. There are also two toll-free
Fax numbers for use in Japan (see
the top menu).
We encourage you to buy
software on tapes or CDs: for example, every 150 tape orders allows FSF to
hire a programmer for a year to write more free software.
The FSF has a copy of the Century Dictionary, an unabridged dictionary now in the public domain, and we are planning to put it online. We tried OCR, but it wasn't reliable enough. So we're looking for volunteers to type it in--20 pages per volunteer. We estimate that takes around 45 hours if you type reasonably fast, including proofreading.
If you'd like to volunteer, please send mail to
dictionary@gnu.ai.mit.edu
. We'll send you 20 xeroxed pages
plus the description of the online dictionary format. (Be very
careful to follow the format.)
This project provides a way for people without programming skills or money to contribute to the GNU Project.
ps
, most of the
shellutils, most of the textutils and all of the fileutils. Progress is
being made so rapidly that by the time you read this it probably does much
more.
For a complete non-network system, we still need to finish the support for
signals (although some simple test programs that use signals already work),
the terminal driver, and the local sockets code (at least for pipes). We
have a mailing list to distribute announcements about progress; send mail
to hurd-ann-request@prep.ai.mit.edu
to be added to it.
ed
has been added. elvis
has been replaced by nvi
.
See section GNU Software and section Utilities Tape, for more information.
arnold@gnu.ai.mit.edu
, a long-time volunteer
for the GNU project, is the author of "What's GNU?", a regular column in
the new monthly magazine Linux Journal. The column discusses the
GNU project, its software and other interesting free software. It is
available from the publishers of Linux Journal. Contact Arnold or
Phil Hughes, phil@fylz.com
, the publisher of Linux
Journal for more information.
Information about the current status of released GNU programs can be found in section GNU Software. Here is some news of future plans.
makeinfo
and the World Wide Web (Also see section GNU Software)
makeinfo
is being modified to translate Texinfo source files into
HTML documents that can be displayed from the Internet's World Wide Web.
schelter@math.utexas.edu
.
gnu@prep.ai.mit.edu
.
cs.nyu.edu
in `/pub/gnat',
though it is not yet stable. News about GNAT is posted to the USENET
newsgroup comp.lang.ada
. Volunteers are also developing a
Pascal front end.
f2c
& GCC, see section GNU Software)
GNU Fortran (g77
) is in "private" alpha test (testing by a small
group of experts) and is not yet publicly released. Until g77
is
fully released to the public, we ask people to use f2c
(a
Fortran-to-C translator) with GCC. As g77
uses a lot of these tools
(the f2c
libraries and the GCC back end), using them and reporting
any problems you find will help speed the release of g77
.
The primary focus of the alpha test is to test the g77
front end,
since that has most of the new code. The secondary focus of the alpha test
is to test the integration between the front end and the back end.
Currently, this is where most of the bugs seem to be. The tertiary focus
is the quality of code generated by the GNU back end for Fortran.
We hope to have a g77
beta release in summer 1994, as part of the
regular compiler distribution.
A mailing list exists for announcements about g77
. To subscribe,
ask info-gnu-fortran-request@prep.ai.mit.edu
. To contact the
author and maintainer of g77
, write to
fortran@prep.ai.mit.edu
.
rjl@monu1.cc.monash.edu.au
.
gmp
(For current status, see section GNU Software)
The GNU mp library, version 2.0, (due out soon) has arbitrary precision
floating point arithmetic, is more portable, and is up to 4 times
faster than previous versions.
sed
; eventually we will distribute it as a separate package as
well.
This new library is nearly a drop-in replacement for the current regex
library used by the GNU Project, but it needs a few more features before it
can be used in Emacs.
Freely redistributable information isn't just software. Here are a few
groups providing various books, historical documents, and more. Please let
either address on
the top menu
know of additional entries. You can FTP
a more complete list
in file `/pub/gnu/FreelyAvailableTexts'
from prep.ai.mit.edu
.
world.std.com
in
`/obi/Networking/John.Goodwin'. To volunteer, contact
jgoodwin@delphi.fnal.gov
.
obi.std.com
in `/obi'.
You can also dial world.std.com
with a modem
(617-739-9753, 8N1)
and create an account to access this information (login as new
).
Accounts on world
are charged for their connect time (ask
info@world.std.com
for details).
mrcnext.cso.uiuc.edu
in file `/etext' and
oes.orst.edu
in file `/pub/almanac/etext'. To find out how
to obtain text via e-mail, send the word `HELP' in the body of a message to
BITFTP%PUCC.BITNET@mitvma.mit.edu
. Or look at
bit.listserv.gutnberg
, a USENET newsgroup. For more
information, write to
dircompg@ux1.cso.uiuc.edu
.
ftp.lysator.liu.se
in
`/pub/runeberg/README'. Access Gopher via type 1 host
gopher.lysator.liu.se
path `/project-runeberg'.
`http://www.lysator.liu.se:7500/runeberg/Main.html' is the URL on
the World Wide Web. For more information or to join the mailing list, ask
runeberg-list-request@lysator.liu.se
, or send postal mail to:
Lysator, Universitetet, S-581 83 Linkoping, Sweden.
2@c
GNU is dedicated to having quality, easy-to-use online and printed documentation. GNU manuals are intended to explain the underlying concepts, describe how to use all the features of each program, and give examples of command use. GNU manuals are distributed as Texinfo source files, which yield both typeset hardcopy via the TeX document formatting system, and online hypertext-like display via the menu-driven Info system. Source for these manuals comes with our software, and they are available in hardcopy; see the see section Free Software Foundation Order Form.
Most GNU manuals are bound as soft cover books with lay-flat bindings. This allows you to open them so they lie flat on a table without creasing the binding. Each book has an inner cloth spine and an outer cardboard cover that will not break or crease as an ordinary paperback will. Currently, the Emacs, GDB, Emacs Lisp Reference, GAWK, Make, Flex, Bison, and Texinfo manuals have this binding. The other GNU manuals are also bound so they lie flat when opened, using a GBC binding. All of our manuals are 7in by 9.25in except the Calc manual, which is 8.5in by 11in.
The edition number of the manual and version number of the program listed after each manual's name were current at the time this Bulletin was published.
The Emacs Manual (9th Edition for Version 19) describes editing with
GNU Emacs. It explains advanced features, including outline mode and
regular expression search, how to use special modes for programming in
languages like C++ and TeX, how to use the tags
utility, how
to compile and correct code, how to make your own keybindings, and other
elementary customizations.
Debugging with GDB (Edition 4.09 for Version 4.9) tells how to use the GNU Debugger, run your program under debugger control, examine and alter data, modify a program's flow of control, and use GDB through GNU Emacs.
The GNU Emacs Lisp Reference Manual (Edition 2.3 for Version 19.23) covers this programming language in depth, including data types, control structures, functions, macros, syntax tables, searching/matching, modes, windows, keymaps, byte compilation, and the operating system interface.
The GAWK Manual (Edition 0.16 for Version 2.16) tells how to use the
GNU implementation of awk
. It is written for those who have never
used awk
and describes the features of this powerful string and
record manipulation language.
The Make Manual (Edition 0.43 for Version 3.68) describes GNU
make
, a program used to rebuild parts of other programs. The manual
tells how to write makefiles, which specify how a program is to be
compiled and how its files depend on each other. Included are an
introductory chapter for novice users and a section about automatically
generated dependencies.
The Flex Manual (Edition 1.03 for Version 2.3.7) tells you how to
write a lexical scanner definition for the flex
program to create a
C++ or C-coded scanner that will recognize the patterns described.
You need no prior knowledge of scanner generators.
The Bison Manual (December 1993 Edition for Version 1.23) teaches you how to write context-free grammars for the Bison program that convert into C-coded parsers. You need no prior knowledge of parser generators.
Using and Porting GNU CC (October 1993 Edition for Version 2.5) explains how to run, install, and port the GNU C Compiler to new systems. It describes new features and incompatibilities of the compiler, but people not familiar with C will also need a good reference on the C programming language. This manual also covers G++.
The Texinfo Manual (Edition 2.19 for Version 3) explains the markup language used to generate both the online Info documentation and typeset hardcopies. It tells you how to make tables, lists, chapters, nodes, indexes, cross references, how to use Texinfo mode in GNU Emacs, and how to catch mistakes. This second edition describes over 50 new commands.
The Termcap Manual (2nd Edition for Version 1.2), often described as "twice as much as you ever wanted to know about termcap," details the format of the termcap database, the definitions of terminal capabilities, and the process of interrogating a terminal description. This manual is primarily for programmers.
The C Library Reference Manual (June 1993 Edition for Version 1.07)
describes most of the facilities of the GNU C library, including both what
Unix calls "library functions" and "system calls." We are doing
limited copier runs of this manual until it becomes more stable. It is
new, and needs corrections and improvements. Please send them to
bug-glibc-manual@prep.ai.mit.edu
.
The Emacs Calc Manual (Edition 2.02 for Version 2.02) includes both a tutorial and a reference manual for Calc. It describes how to do ordinary arithmetic, how to use Calc for algebra, calculus, and other forms of mathematics, and how to extend Calc.
All our software is available via anonymous FTP; see section How to Get GNU Software. In addition we offer software on various media and printed documentation:
We welcome all bug reports sent to the appropriate electronic mailing list (see section Free Software Support).
In the articles describing the contents of each medium, the version number listed after each program name was current when we published this Bulletin. When you order a distribution tape or diskette, some of the programs may be newer, and therefore the version number higher.
Key to cross reference:
Configuring GNU Software:
We are using a uniform scheme for configuring GNU software packages in
order to compile them, which uses the autoconf
program. All GNU
software supports the same alternatives for naming machine and system
types. This makes it possible to configure any and all GNU software in the
same manner.
The configuration scheme also supports configuring a directory containing several GNU packages with one command. When the GNU system is complete it will be possible to configure and build the entire system at once, eliminating the need to separately configure each individual package.
The configuration scheme can also specify both the host and target system, so you can easily configure and build cross-compilation tools.
GNU software currently available:
(For new features and coming programs, see section Forthcoming GNUs.)
acm
(SrcCD, UtilT)
acm
is a LAN-oriented, multiplayer aerial combat simulation that
runs under the MIT X Window System. Players engage in air to air combat
against one another using heat seeking missiles and cannons. Eventually we
hope to turn this into a more general purpose flight simulator.
m4
macro calls. Autoconf
requires GNU m4
to operate, but the resulting configure scripts it
generates do not.
Most GNU programs now use Autoconf-generated configure scripts.
sh
and offers many extensions found in csh
and
ksh
. BASH has job control, csh
-style command history, and
command-line editing (with Emacs and vi
modes built-in, and the
ability to rebind keys) via the readline library. BASH conforms to
the POSIX 1003.2 shell specification.
bc
(SrcCD, UtilT)
bc
is an interactive algebraic language with arbitrary precision.
GNU bc
follows the POSIX 1003.2
draft
standard, with several extensions including multi-character variable names,
an else
statement and full Boolean expressions. GNU bc
does
not require the separate dc
program.
ld
or GDB) to support many
different formats in a clean way. BFD provides a portable interface, so
that only BFD needs to know the details of a particular format. One result
is that all programs using BFD will support formats such as a.out, COFF,
ELF & OSF-Rose. BFD comes with source for Texinfo documentation (not yet
published on paper).
Presently BFD is not distributed separately because it is not yet
completely stable; however, it is included with packages that use it.
ar
,
c++filt
,
demangle
,
gprof
,
ld
,
nlmconv
,
nm
,
objcopy
,
objdump
,
ranlib
,
size
,
strings
,
&
strip
.
Binutils Version 2 is completely rewritten to use the BFD library. The GNU
linker ld
emits source-line numbered error messages for
multiply-defined symbols and undefined references. It interprets a
superset of the AT&T Linker Command Language, which gives general control
over where segments are placed in memory. nlmconv
converts object
files into Novell NetWare Loadable Modules. The objdump
program can
disassemble code for a29k, ALPHA, H8/300, H8/500, HP--PA, i386, i960, m68k,
m88k, MIPS, SH, SPARC, & Z8000 processors, and can display other data such
as symbols and relocations from any file format understood by BFD.
yacc
. Texinfo source for the Bison Manual
and reference card are included. See section GNU Documentation.
malloc
which
wastes less memory than the old GNU version. The GNU regular-expression
functions (regex) now nearly conform to the POSIX 1003.2
standard.
GNU stdio
lets you define new kinds of streams, just by writing a
few C functions. The fmemopen
function uses this to open a
stream on a string, which can grow as necessary. You can define your
own printf
formats to use a C function you have written. For
example, you can safely use format strings from user input to implement
a printf
-like function for another programming language.
Extended getopt
functions are already used to parse options,
including long options, in many GNU utilities.
Version 1.08 has just been released, adding support for Sun RPC,
mmap
and friends, and compatibility with several more traditional
Unix functions. It runs on Sun-3 (SunOS 4.1), Sun-4 (SunOS 4.1 or Solaris
2), HP 9000/300 (4.3BSD), SONY News 800 (NewsOS 3 or 4), MIPS DECstation
(Ultrix 4), DEC Alpha (OSF/1), i386/i486 (System V, SVR4, BSD, SCO 3.2 &
SCO ODT 2.0), Sequent Symmetry i386 (Dynix 3) & SGI (Irix 4). Texinfo
source for the GNU C Library Reference Manual is included
(see section GNU Documentation); the manual still needs updating.
gnuplot
. Calc comes with Texinfo
source for a reference card and the Calc Manual, which serves as a
tutorial and reference. See section GNU Documentation.
Stuart Cracraft
25682 Cresta Loma
Laguna Niguel, CA 92677
USA
Telephone: +1-714-347-8107
Electronic-Mail: cracraft@ai.mit.edu
prep.ai.mit.edu
.) Get source from ftp.cli.com
. For
details ask schelter@math.utexas.edu
.
cpio
(SrcCD, UtilD, UtilT)
cpio
is an alternative archive program with all the features of SVR4
cpio
, including support for the final POSIX 1003.1 ustar
standard. mt
, a program to position magnetic tapes, is included with
cpio
.
office@usenix.org
.
dc
(SrcCD, UtilT)
dc
is an RPN calculator. GNU bc
does not require a separate
dc
program to run. This version of dc
will eventually be
merged with GNU bc
.
expect
,
which runs scripts to conduct dialogs with programs; and Tcl, which is an
embeddable scripting language. The FSF hopes to replace Tcl with a cleaner
programming language someday.
oak.oakland.edu
in `/pub/msdos/demacs' (USA) &
utsun.s.u-tokyo.ac.jp
in `/GNU/demacs' (Japan). For an
FTP site list and the current status of Demacs, email to
demacs@sigmath.osaka-u.ac.jp
. For details, FTP the `README'
file.
The FSF is offering Demacs on diskette. We will replace it with GNU
Emacs 19, as soon as the MS-DOS port is ready. See section Emacs Diskettes.
diff
compares files showing line-by-line changes in several
flexible formats. It is much faster than traditional Unix versions. The
Diffutils package contains diff
, diff3
, sdiff
,
and cmp
.
These improvements have recently been made to Diffutils:
A new heuristic for diff
greatly reduces the time needed to
compare large input files that contain many differences,
and produces output that is usually smaller rather than larger.
New diff
options give detailed control over output format,
e.g. to provide if-then-else output for programming languages other than C.
Message wordings and the definition of "white space" have been
revised for compatibility with the POSIX.2 standard (ISO/IEC
9945-2:1993).
flex
, GAS, and the GNU Binutils. Full source code is
provided.
It requires at least 5MB of hard disk space to install and 512K
of RAM to use.
It supports SVGA (up to 1024x768),
XMS & VDISK memory allocation,
himem.sys
,
VCPI (e.g. QEMM, DESQview, & 386MAX), and
DPMI (e.g. Windows 3.x, OS/2, QEMM, & QDPMI).
The FSF offers it on the section DJGPP Diskettes, and on the section Compiler Tools Binaries CD-ROM. Or FTP file `/pub/msdos/djgpp' from
oak.oakland.edu
(or another SimTel mirror site). Ask
djgpp-request@sun.soe.clarkson.edu
to join a mailing list for
DJGPP users.
dld
(LangT, SrcCD)
dld
is a dynamic linker written by W. Wilson Ho. Linking your
program with the dld
library allows you to dynamically load object
files into the running binary. Currently supported are VAX (Ultrix), Sun 3
(SunOS 3.4 & 4.0), SPARC (SunOS 4.0), Sequent Symmetry (Dynix), & Atari ST.
doschk
(SrcCD, UtilT)
This program is intended as a utility to help software developers ensure
that their source file names are distinguishable on System V platforms with
14-character filenames and on MS-DOS with 8+3 character filenames.
ecc
(SrcCD, UtilT)
ecc
is a Reed-Solomon error correction checking program, which can
correct three byte errors in a block of 255 bytes and detect more severe
errors. Contact paulf@Stanford.EDU
for more information.
ed
(SrcCD, UtilT)
Ed is the standard text editor.
es
(SrcCD, UtilT)
es
is an extensible shell based on rc
that has
first class functions, lexical scope, an exception system, and
rich return values (i.e. functions can return values other than just
numbers). Like rc
, it is great for both interactive use and for
scripting, particularly because its quoting rules are much less baroque
than the C or Bourne shells.
f2c
(LangT, SrcCD)
f2c
converts Fortran-77 source files into C or C++, which can be
compiled with GCC. You can get bug fixes via FTP from
netlib.att.com
in the file `/netlib/f2c/changes.Z' or
by email from netlib@research.att.com
.
see section Forthcoming GNUs, for information about GNU Fortran.
bug-fax@prep.ai.mit.edu
for more information.
chgrp
,
chmod
,
chown
,
cp
,
dd
,
df
,
dir
,
du
,
install
,
ln
,
ls
,
mkdir
,
mkfifo
,
mknod
,
mv
,
mvdir
,
rm
,
rmdir
,
touch
,
&
vdir
.
Only some of these are on the section Selected Utilities Diskettes.
find
(SrcCD, UtilD, UtilT)
find
is frequently used both interactively and in shell scripts to
find files which match certain criteria and perform arbitrary operations on
them. Also included are xargs
, which applies a command to a
list of files, and locate
, which scans a database for file
names that match a pattern.
flex
(LangT, SrcCD, UtilD)
flex
is a replacement for the lex
scanner generator.
flex
was written by Vern Paxson of the Lawrence Berkeley Laboratory
and generates far more efficient scanners than lex
does. Texinfo
source for the Flex Manual and reference card are included.
See section GNU Documentation.
bpltobzr
,
bzrto
,
charspace
,
fontconvert
,
gsrenderfont
,
imageto
,
imgrotate
,
limn
,
and
xbfe
.
awk
. It also provides several useful extensions not found in
other awk
implementations. Texinfo source for the GAWK
Manual comes with the software. See section GNU Documentation.
object
). As much as possible, G++ is kept compatible with the
evolving draft ANSI standard, but not with cfront
(AT&T's compiler),
which has been diverging from ANSI.
The GNU C Compiler is a fairly portable optimizing compiler which performs
automatic register allocation, common sub-expression elimination, invariant
code motion from loops, induction variable optimizations, constant
propagation and copy propagation, delayed popping of function call
arguments, tail recursion elimination, integration of inline functions and
frame pointer elimination, instruction scheduling, loop unrolling, filling
of delay slots, leaf function optimization, optimized multiplication by
constants, a certain amount of common subexpression elimination (CSE)
between basic blocks (though not all of the supported machine descriptions
provide for scheduling or delay slots), a feature for assigning attributes
to instructions, and many local optimizations that are automatically
deduced from the machine description. Function-wide CSE has been written,
but needs to be cleaned up before it can be installed.
Position-independent code is supported on the 68k, i386, Hitachi Slt,
Hitachi H8/300, Clipper, 88k, SPARC & SPARClite.
GCC can open-code most arithmetic on 64-bit values (type long long
int
). It supports extended floating point (type long double
) on
the 68k; other machines will follow.
GCC supports full ANSI C, traditional C and GNU C extensions. GNU C has
been extended to support nested functions, nonlocal gotos, and taking the
address of a label.
GCC can generate a.out, COFF, ELF & OSF-Rose files when used with a
suitable assembler. It can produce debugging information in these
formats: BSD stabs, COFF, ECOFF, ECOFF with stabs & DWARF.
GCC generates code for many CPUs, including: a29k, Alpha, ARM, Convex cN,
Clipper, Elxsi, H8300, HP--PA (1.0 and 1.1) i370, i386, i486, i860, i960,
m68k, m68020, m88k, MIPS, ns32k, Pyramid, ROMP, RS6000, SH, SPARC,
SPARClite, VAX, and we32k.
Operating systems supported include: AIX, ACIS, AOS, BSD, Clix, Ctix,
DG/UX, Dynix, Genix, HP-UX, ISC, Irix, Linux, Luna, LynxOS, Mach, Minix,
NewsOS, OSF, OSF-Rose, RISCOS, SCO, Solaris 2, SunOS 4, SysV, Ultrix, Unos,
& VMS.
The old (version 1) machine descriptions for the Alliant, Tahoe and Spur
(as well as a new port for the Tron) do not work, but are still included in
the distribution in case someone wants to work on them.
Using the configuration scheme for GCC, building a cross-compiler is as
easy as building a compiler for the same target machine. Version 2
supports more general calling conventions: it can pass arguments "by
reference" and can preallocate the space for stack arguments. GCC 2 on
the SPARC uses the SPARC conventions for structure arguments and return
values.
We no longer distribute or maintain version 1 of GCC, G++, or
libg++.
Texinfo source for the GCC manual, Using and Porting GNU CC,
is included with the compiler.
See section Forthcoming GNUs, for plans for later releases of GCC.
xxgdb
provides an X interface (but it is not
distributed or maintained by the FSF; it is available for anonymous FTP
from ftp.x.org
in the `/contrib' directory).
GDB uses a standard remote interface to a simulator library which (so far)
has simulators for the Zilog Z8001/2, Hitachi H8/300, H8/500 & Super-H.
GDB can perform cross-debugging. To say that GDB targets a platform
means that it can perform native or cross-debugging for it. To say that
GDB can host a given platform means that it can be built on it, but
cannot necessarily debug native programs. GDB can:
gdbm
(LangT, SrcCD, UtilD)
The gdbm
library is the GNU replacement for the traditional
dbm
and ndbm
libraries. It implements a database using quick
lookup by hashing. gdbm
does not need sparse file formats
(unlike its Unix counterparts).
enscript
); a
utility to extract the text from a Postscript document; a much more
reliable (and faster) Microsoft Windows implementation; support for
Microsoft C/C++ 7.0; drivers for many new printers, including the
SPARCprinter, and for TIFF/F (fax) file format; many more Postscript Level
2 facilities, including most of the color space facilities (but not
patterns), and the ability to switch between Level 1 and Level 2
dynamically.
Ghostscript accepts commands in Postscript and executes them by writing
directly to a printer, drawing on an X window, or writing to a file that
you can print later (or to a bitmap file that you can manipulate with other
graphics programs).
Ghostscript includes a C-callable graphics library (for client programs
that do not want to deal with the Postscript language). It also supports
IBM PCs and compatibles with EGA, VGA, or SuperVGA graphics (but please do
not ask the FSF staff any questions about this; we do not use PCs).
See section Forthcoming GNUs, for plans for later releases of Ghostscript.
ghostview@cs.wisc.edu
, has created Ghostview, a
previewer for multi-page files that runs on top of Ghostscript. Ghostview
provides an X11 user interface for the Ghostscript interpreter. Ghostview
and Ghostscript function as two cooperating programs; Ghostview creates a
viewing window and Ghostscript draws in it. There is a port for Ghostview
to MS-Windows called "GSview for Windows". For information about future
releases of this program, see section Forthcoming GNUs.
gmp
(LangT, SrcCD)
GNU mp is a library for arbitrary precision arithmetic on signed integers
and rational numbers. It has a rich set of functions with a regular
interface.
See section Forthcoming GNUs, for the plans for later releases of gmp
.
gnuplot
(SrcCD, UtilT)
gnuplot
is an interactive program for plotting mathematical
expressions and data. It handles both curves (2 dimensions) and surfaces
(3 dimensions). Curiously, the program was neither written nor named for
the GNU Project; the name is a coincidence.
gperf
(LangT, SrcCD)
gperf
is a "perfect" hash-table generation utility. There are
actually two implementations of gperf
, one written in C and one in
C++. Both will produce hash functions in either C or C++.
spline
program;
examples of shell scripts using graph
and plot
; & a
statistics toolkit.
Existing ports need retesting. Contact Rich Murphey,
Rich@rice.edu
, if you can help test/port it to anything beyond
a SPARCstation.
grep
, egrep
, and fgrep
.
They are much faster than the traditional Unix versions.
dvi
format, and typewriter-like
devices, as well as implementations of
eqn
,
nroff
,
pic
,
refer
,
tbl
,
troff
,
and the
man
,
ms
,
and
mm
macros.
Groff's mm
macro package is almost
compatible with the DWB mm
macros and has several extensions.
Also included is a modified version of the Berkeley me
macros and an
enhanced version of the X11 xditview
previewer.
Written in C++, these programs can be compiled with GNU
C++ Version 2.5 or later.
Groff users are encouraged to contribute enhancements. Most needed
are complete Texinfo documentation, a grap
emulation (a pic
preprocessor for typesetting graphs), a page-makeup postprocessor similar
to pm
(see Computing Systems, Vol. 2, No. 2; ask
office@usenix.org
for information on obtaining a copy) and an ASCII
output class for pic
so that pic
can be integrated with
Texinfo. Questions and bug reports from users who have read the
documentation that is provided with the distribution can be sent to
bug-groff@prep.ai.mit.edu
.
gzip
(DjgppD, EmcsT, LangT, SrcCD, UtilT)
Some of the contents of our tape and FTP distributions are compressed. We
have software on our tapes and FTP sites to uncompress these files. Due to
patent troubles with compress
, we have switched to another
compression program, gzip
. gzip
can expand LZW-compressed
files but uses a different algorithm for compression which generally
produces better results. It also uncompresses files compressed with System
V's pack
program.
hello
(SrcCD, UtilT)
The GNU hello
program produces a familiar, friendly greeting. It
allows non-programmers to use a classic computer science tool which would
otherwise be unavailable to them. Because it is protected by the GNU
General Public License, users are free to share and change it.
Like any truly useful program, hello
provides a built-in mail
reader.
hp2xx
(SrcCD, UtilT)
GNU hp2xx
reads HP-GL files, decomposes all drawing commands into
elementary vectors, and converts them into a variety of vector and raster
output formats. It is also an HP-GL previewer. Currently supported vector
formats include encapsulated Postscript, Uniplex RGIP, Metafont and various
special TeX-related formats, and simplified HP-GL (line drawing only)
for imports. Raster formats supported include IMG, PBM, PCX, & HP-PCL
(including Deskjet & DJ5xxC support). Previewers work under X11 (Unix),
OS/2 (PM & full screen), MS-DOS (SVGA, VGA, & HGC).
indent
(SrcCD, UtilD, UtilT)
GNU indent
is a revision of the BSD version. By default, it formats
C source according to the GNU coding standards. The BSD default, K&R and
other formats are available as options. It is also possible to define your
own format.
GNU indent
is more robust and provides more functionality than other
versions, e.g., it handles C++ comments.
ftp.maths.tcd.ie
in `/pub/bosullvn/jacal',
altdorf.ai.mit.edu
in `/archive/scm', or
prep.ai.mit.edu
in `/pub/gnu/jacal'.
The FSF is not distributing JACAL on any media. To receive an IBM PC
floppy disk with the source and executable files, send $99.00 to:
Aubrey Jaffer 84 Pleasant Street Wakefield, MA 01880 USA
m4
(SrcCD, UtilD, UtilT)
GNU m4
is an implementation of the traditional Unix macro processor.
It is mostly SVR4 compatible, although it has some extensions (for example,
handling more than 9 positional parameters to macros). m4
also has
built-in functions for including files, running shell commands, doing
arithmetic, etc.
make
(BinCD, EmcsT, LangT, SrcCD, UtilD, UtilT)
GNU make
supports POSIX 1003.2 and has all but a few obscure
features of the BSD and System V versions of make
, as well as many
of our own extensions. GNU extensions include long options, parallel
compilation, flexible implicit pattern rules, conditional execution and
powerful text manipulation functions. Recent versions have improved error
reporting and added support for the popular `+=' syntax to append
more text to a variable's definition. Texinfo source for the Make
Manual comes with the program. See section GNU Documentation.
GNU make
is on several of our tapes because some system vendors
supply no make
utility at all, and some native make
programs
lack the VPATH
feature essential for using the GNU configure system
to its full extent. The GNU make
sources have a shell script to
build make
itself on such systems.
nvi
(SrcCD, UtilT)
nvi
is a free implementation of the vi
/ex
Unix editor.
It has most of the functionality of the original vi
/ex
,
except "open" mode & the lisp
option, which will be added.
Enhancements over vi
/ex
include split screens with multiple
buffers, ability to handle 8-bit data, infinite file & line lengths, tag
stacks, infinite undo & extended regular expressions. It runs under BSD,
Linux, NetBSD, FreeBSD, BSDI, AIX, HP-UX, DGUX, IRIX, PSF, PTX, Solaris,
SunOS, Ultrix, Unixware & should port easily to many other systems.
bug-octave@che.utexas.edu
.
Octave is available via anonymous ftp from ftp.che.utexas.edu
in
the directory `/pub/octave'. The files are in gzipped tar
format (see the file `/pub/gnu/README' on
prep.ai.mit.edu
). Source is included for a 150+ page
Texinfo manual, which is not yet published by the FSF.
p2c
(LangT, SrcCD)
p2c
is a Pascal-to-C translator written by Dave Gillespie. It
recognizes many Pascal dialects including Turbo, HP, VAX, and ISO, and
produces readable, maintainable, portable C.
patch
(SrcCD, UtilT)
patch
is our version of Larry Wall's program to take diff
's
output and apply those differences to an original file to generate the
modified version.
perl
(LangT, SrcCD)
Larry Wall's perl
combines the features and capabilities of
sed
, awk
, sh
and C, as well as interfaces to all the
system calls and many C library routines. A perl mode for editing
perl
code comes with GNU Emacs 19.
ptx
(SrcCD, UtilD, UtilT)
GNU ptx
is the GNU version of the traditional permuted index
generator. It can handle multiple input files at once, produce TeX
compatible output, and produce readable KWIC (KeyWords In Context)
indexes without needing to use nroff
. This version does not handle
input files that do not fit in memory all at once.
rc
(SrcCD, UtilT)
rc
is a shell that features a C-like syntax (much more so than
csh
) and far cleaner quoting rules than the C or Bourne shells.
It's intended to be used interactively, but is also great for writing
scripts. It inspired the shell es
.
diff
, RCS can
handle binary files (executables, object files, 8-bit data, etc).
Also see the item about CVS in this article.
recode
(SrcCD, UtilT)
GNU recode
converts files between character sets and usages.
When exact transliterations are not possible, it may get rid of the
offending characters or fall back on approximations. This program
recognizes or produces nearly 150 different character sets and is able to
transliterate files between almost any pair. Most RFC 1345 character
sets are supported.
sed
.
screen
(SrcCD, UtilT)
screen
is a terminal multiplexer that runs several separate
"screens" (ttys) on a single physical character-based terminal. Each
virtual terminal emulates a DEC VT100 plus several ANSI X3.64 and ISO 2022
functions. screen
sessions can be detached and resumed later on a
different terminal type.
sed
(SrcCD, UtilD, UtilT)
sed
is a stream-oriented version of ed
. It is used copiously
in shell scripts. GNU sed
comes with the rx library,
which is a faster version of regex (see section Forthcoming GNUs).
basename
,
date
,
dirname
,
echo
,
env
,
expr
,
false
,
groups
,
id
,
nice
,
nohup
,
printenv
,
printf
,
sleep
,
stty
,
su
,
tee
,
test
,
true
,
tty
,
uname
,
who
,
whoami
,
and
yes
.
Matthias Mutz
Universitaet Passau, FMI
94030 Passau
Germany
Electronic-mail: mutz@fmi.uni-passau.de
gso
, a
function, a CPU to generate code for, and how many instructions you can
accept. Its application in GCC is described in the ACM SIGPLAN
PLDI'92 proceedings. Superopt supports: SPARC, m68k, m68020, m88k, IBM
RS/6000, AMD 29000, Intel 80x86, Pyramid, DEC Alpha, & HP--PA.
tar
(SrcCD, UtilT)
GNU tar
includes multivolume support, the ability to archive sparse
files, automatic archive compression/decompression, remote archives and
special features that allow tar
to be used for incremental and full
backups. Unfortunately, GNU tar
implements an early draft of the
POSIX 1003.1 ustar standard which is different from the final
standard. Adding support for the new changes in a backward-compatible
fashion is not trivial.
web2c
TeX package, the sources for which
are available via anonymous ftp; retrieval instructions are in
`pub/tex/FTP.nwc' on ftp.cs.umb.edu
. If you receive any
installation support from the University of Washington, please consider
sending them a donation.
To order a full distribution written in tar
on either a
1/4inch 4-track QIC-24 cartridge or a 4mm DAT cartridge, send
$210.00 to:
Northwest Computing Support Center
DR-10, Thomson Hall 35
University of Washington
Seattle, WA 98195
USA
Electronic-Mail: unixtex@u.washington.edu
Telephone: +1-206-543-6259
Please make checks payable to the University of Washington.
Checks must be in U.S. dollars, drawn on a U.S. bank.
Prepaid orders are preferred but purchase orders are acceptable; however,
they carry an extra charge of $10.00 to pay for invoice processing.
Overseas sites: please add to the base cost $20.00 for shipment via
air parcel post, or $30.00 for shipment via courier.
Please check with the above for current prices and formats.
makeinfo
,
info
,
texi2dvi
,
texindex
,
tex2patch
,
and
fixfonts
.
Source for the Texinfo Manual is included. See section GNU Documentation.
cat
,
cksum
,
comm
,
csplit
,
cut
,
expand
,
fold
,
head
,
join
,
nl
,
od
,
paste
,
pr
,
sort
,
split
,
sum
,
tac
,
tail
,
tr
,
unexpand
,
uniq
,
and
wc
.
time
(SrcCD, UtilT)
time
is used to report statistics (usually from a shell) about the
amount of user, system and real time used by a process. On some
systems it also reports memory usage, page faults, and other statistics.
tput
(SrcCD, UtilT)
tput
is a portable way for shell scripts to use special terminal
capabilities. Our tput
uses the Termcap database, instead of
Terminfo as most others do.
f
,
g
and v
(in all window and packet sizes),
G
,
t
,
e
,
Zmodem and two new bidirectional
(i
and j
) protocols. If you have a
Berkeley sockets library, it can make TCP connections. If you have TLI
libraries, it can make TLI connections. Source is included for a Texinfo
manual, which is not yet published by the FSF.
uuencode
and uudecode
(SrcCD, UtilT)
uuencode
and uudecode
are used to transmit binary files over
transmission mediums that support only simple ASCII data.
wdiff
(SrcCD, UtilT)
wdiff
is a front-end to GNU diff
. It compares two files,
finding which words have been deleted or added to the first in order to
create the second. It has many output formats and interacts well with
terminals and pagers. wdiff
is particularly useful when two texts
differ only by a few words and paragraphs have been refilled.
Here is a list of what package each GNU program or library is in.
Programs on the two X11 tapes and the 4.4BSD--Lite tapes are not
included, due to lack of space in this Bulletin. You can anonymous FTP a
full list from prep.ai.mit.edu
in the file
`/pub/gnu/ProgramIndex'.
We offer Unix
source code on tapes in tar
format on these media:
The contents of the reel and various cartridge tapes for Unix systems are the same (except for the RS/6000 Emacs tape, which also has executables for Emacs); only the media are different. For pricing information, see the see section Free Software Foundation Order Form. Source code for the manuals is included, in Texinfo format. See section GNU Documentation.
Some of the files on the tapes may be compressed with gzip
to
make them fit. Refer to the top-level `README' file at the
beginning of each tape for instructions on uncompressing them.
uncompress
and unpack
do not work!
This tape contains programming tools: compilers, interpreters, and related programs (parsers, conversion programs, debuggers, etc.).
This tape consists mostly of smaller utilities and miscellaneous applications.
This tape has Common Lisp systems and libraries, GNU Emacs, assorted extensions that work with GNU Emacs, and a few other important utilities.
Scheme is a simplified, lexically-scoped dialect of Lisp. It was designed at MIT and other universities to teach students the art of programming, and to research new parallel programming constructs and compilation techniques.
This tape contains MIT Scheme 7.1, which conforms to the "Revised^4 Report On the Algorithmic Language Scheme" (MIT AI Lab Memo 848b), for which TeX source is included. It is written partly in C, but is presently hard to bootstrap. Binaries that can be used to bootstrap Scheme are available for:
If your system is not on this list and you don't enjoy the bootstrap challenge, see the JACAL item in section GNU Software.
The two X11 tapes contain Version 11, Release 6 of the MIT X Window System. The first tape contains all of the core software, documentation and some contributed clients. We call this the "required" X tape since it is necessary for running X or running GNU Emacs under X. The second, "optional" tape contains contributed libraries and other toolkits, the Andrew User Interface System, games, and other programs.
The X11 Required tape also contains all fixes and patches released to date. We update this tape as new fixes and patches are released for programs on both tapes. See section Tape & CD-ROM Subscription Service.
We will distribute X11R5 on tape until X11R6 is stable, and on the section November 1993 Source Code CD-ROM, while supplies last.
The "4.4BSD--Lite" release is the last from the Computer Systems Research Group at the University of California at Berkeley. It includes most of the BSD software system except for a few proprietary files that still remain in the full 4.4BSD distribution.
We offer two VMS tapes. One has just GNU Emacs 18.59 (none of the other software on the section Emacs Tape, is included). The other has GCC 2.3.3, Bison 1.19 (to compile GCC), GAS 1.38 (to assemble GCC's output) and some library and include files (none of the other software on the section Languages Tape, is included). We are not aware of a GDB port for VMS. Both VMS tapes have executables from which you can bootstrap, as the DEC VMS C compiler cannot compile GCC. Please do not ask us to devote effort to VMS support, because it is peripheral to the GNU Project.
We currently offer these CD-ROMs:
Our CD-ROMs are in ISO 9660 format and can be mounted as a read-only file system on most operating systems. If your driver supports it you can mount each CD-ROM with "Rock Ridge" extensions and it will look just like an ordinary Unix file system, rather than one full of truncated and otherwise mangled names that fit the vanilla ISO 9660 specifications.
You can build most of the software without copying the sources off the CD. You only need enough disk space for object files and intermediate build targets.
If a business or organization is ultimately paying, the May 1994 Source CD costs $400. It costs $100 if you, an individual, are paying out of your own pocket. The Compiler Tools Binaries CD-ROM costs $240 for a business or organization, and $60 for an individual.
The Free Software Foundation has produced the fourth edition of its Source Code CD-ROM. It contains the following packages:
The CD-ROM also contains Texinfo source for the GNU Emacs Lisp
Reference Manual Edition 2.3 for version 19, and other manuals listed in
section GNU Documentation; as well as a snapshot of the Emacs Lisp Archive at
Ohio State University. (You can get the libraries in this archive by
anonymous FTP from archive.cis.ohio-state.edu
in
`/pub/gnu/emacs/elisp-archive'.)
The contents of the MIT Scheme, X11 Optional and VMS tapes are not included. Programs that are only on MS-DOS diskettes and not on the tapes are also not included. See section Tapes, and section MS-DOS Diskettes.
Except for the Ghostview for Windows executable, there are no precompiled programs on this CD. You will need a C compiler. (Programs which need some other interpreter or compiler normally provide the C source for a bootstrapping program.)
The Free Software Foundation is still distributing the third edition of its Source Code CD-ROM. We are doing so because it contains X11R5, and we feel that people should have a choice between X11R5 and X11R6 until the latter is stable. Because the other software on the third edition is older than that on the fourth edition, we have reduced the price of the third edition. The third edition contains the following packages:
The CD-ROM also contains Texinfo source for the GNU Emacs Lisp
Reference Manual Edition 2.02 for version 19, and other manuals listed in
section GNU Documentation; as well as a snapshot of the Emacs Lisp Archive at
Ohio State University. (You can get the libraries in this archive by
anonymous FTP from archive.cis.ohio-state.edu
in
`/pub/gnu/emacs/elisp-archive'.)
The contents of the MIT Scheme, X11 Optional and VMS tapes are not included. Programs that are only on MS-DOS diskettes and not on the tapes are also not included. See section Tapes, and section MS-DOS Diskettes.
Except for the MIT Scheme binaries for MS-DOS and the Ghostview for Windows executable, there are no precompiled programs on this CD. You will need a C compiler (programs which need some other interpreter or compiler normally provide the C source for a bootstrapping program).
We are now offering a CD-ROM that contains executables for GNU compiler tools for some systems which lack a compiler. This helps people with 80386 and 80486 machines running MS-D0S, not to mention HP--PA machines running HP-UX 9, and Sparcs running SunOS 4.1 & Solaris 2.
This enables the people who use these systems to compile GNU and other free software without having to buy a proprietary compiler.
We hope to have more systems on each update of this CD-ROM. If you can help build binaries for new systems (especially those that don't come with a C compiler), or have one to suggest, please contact us at the addresses on the top menu.
These packages:
For these platforms:
i386-msdos
hppa1.1-hp-hpux9
sparc-sun-solaris2
sparc-sun-sunos4.1
The FSF distributes, on 3.5inch 1.44MB diskettes, some of the GNU software ported to MS-DOS. The disks have both sources and executables.
We offer DJGPP on 21 diskettes. For details, see section GNU Software.
Demacs is a version of GNU Emacs. Two versions are included on the six diskettes we distribute: one handles 8-bit character sets; the other, based on an early version of MULE, handles 16-bit character sets including Kanji.
We will be replacing Demacs with the MS-DOS port of GNU Emacs 19, as soon as the port is ready. The number of diskettes is not yet known. See section GNU Software, for details about both programs.
The GNUish MS-DOS Project releases GNU software ported to PC compatibles.
We offer these programs on five diskettes. In general, this software
will run on 8086 and 80286--based machines; an 80386 is not required. Some
of these utilities are necessarily missing features.
Included are:
cpio
,
diff
,
find
,
flex
,
gdbm
,
grep
,
indent
,
less
,
m4
,
make
,
ptx
,
RCS,
sed
,
shar
,
sort
,
&
Texinfo.
We offer GNU Chess and gnuplot
for Microsoft Windows on a single
diskette.
If you do not have net access, our subscription service enables you to stay current with the latest FSF developments. For a one-time cost equivalent to three tapes or CD-ROMs (plus shipping in some cases), we will ship you four new versions of the tape of your choice or the Source Code CD-ROM. The tapes are sent each quarter, the CD-ROMs are sent as they are issued (which is currently twice a year, but we may issue it more frequently in the future.)
Regularly, we will send you a new version of an Emacs, Languages, Utilities, or MIT X Window System (X11R6) Required tape or the Source CD-ROM. The MIT Scheme and MIT X Window System Optional tapes are not changed often enough to warrant quarterly updates. We do not yet know if we will be offering subscriptions to the Compiler Tools Binaries CD-ROM.
Since Emacs 19 is on the Emacs Tape and the Source CD-ROM, a subscription to either is an easy way to keep current with Emacs 19 as it evolves.
A subscription is also an easy way to keep up with the regular bug fixes to the MIT X Window System. We will update the X11R6 Required tape as fixes and patches are issued throughout the year. Each new edition of the section May 1994 Source Code CD-ROM, also has updated sources for the MIT X Window System.
Please note: In two cases, you must pay 4 times the normal shipping required for a single order when you pay for each subscription. If you're in Alaska, Hawaii, or Puerto Rico you must add $20.00 for shipping for each subscription. If you're outside of U.S., Canada, and Puerto Rico, you have to add $120.00 for shipping subscription. See "Unix and VMS Software" & "Shipping Instructions" on the see section Free Software Foundation Order Form.
The Free Software Foundation has been repeatedly asked to create a package that provides executables for all of our software. Normally we offer only sources. In addition to providing binaries with the source code, the Deluxe Distribution includes a complete set of our printed manuals and reference cards.
The FSF Deluxe Distribution contains the binaries and sources to hundreds of different programs including GNU Emacs, the GNU C Compiler, the GNU Debugger, the complete MIT X Window System, and all the GNU utilities.
You may choose one of these machines and operating systems: HP 9000 series
300, 700 or 800 (4.3BSD or HP-UX); RS/6000 (AIX); SONY News 68k (4.3BSD or
NewsOS 4); Sun-3, Sun-4, or SPARC (SunOS 4 or Solaris). If your machine or
system is not listed, or if a specific program has not been ported to that
machine, please call the FSF office at the phone number below or send
e-mail to gnu@prep.ai.mit.edu
to see what we can do.
We supply the software on one of these tape formats in Unix tar
format: 1600 or 6250bpi 1/2in reel; Sun DC300XLP 1/4in
cartridge, QIC-24; Hewlett-Packard 16-track DC600HC 1/4in cartridge;
IBM RS/6000 1/4in cartridge, QIC-150; Exabyte 8mm cartridge;
DAT 4mm cartridge. If your computer cannot read any of these, please
contact us to see if we can handle your format.
The manuals included are one each of the Bison, Calc, Gawk, GNU C Compiler, GNU C Library, GDB, Flex, GNU Emacs 19 Lisp Reference, Make, Texinfo, and Termcap manuals; six copies of the GNU Emacs 19 manual; and packets of ten reference cards each for GNU Emacs, Calc, GDB, Bison, & Flex. In addition, every Deluxe Distribution includes CD-ROMs (in ISO 9660 format with Rock Ridge extensions) that contain sources of our software & compiler tool binaries for some systems.
The price of the Deluxe Distribution is $5000 (shipping included). It is designed for people who want to have everything compiled for them. These sales provide enormous financial assistance towards helping the FSF develop more free software. To order, please fill out the "Deluxe Distribution" section on the see section Free Software Foundation Order Form. and send it to:
Free Software Foundation, Inc. 675 Massachusetts Avenue Cambridge, MA 02139--3309 USA Telephone: +1-617-876-3296 Fax: +1-617-492-9057 Fax (in Japan): 0031-13-2473 (KDD) 0066-3382-0158 (IDC) Electronic mail: gnu@prep.ai.mit.edu
All the software and publications from the Free Software Foundation are distributed with permission to copy and redistribute. The easiest way to get GNU software is to copy it from someone else who has it. You can get GNU software direct from the FSF by ordering diskettes, tapes, or CD-ROMs. Such orders provide most of the funds for the FSF staff to develop more free software, so please support our work by ordering if you can. See the see section Free Software Foundation Order Form.
There are also third party groups who distribute our software; they do not work with us, but can provide our software in other forms. Some are listed in section Free Software for Microcomputers. Please note that the Free Software Foundation is not affiliated with them in any way and is not responsible for either the currency of their versions or the swiftness of their responses.
If you decide to do business with one of these distributors, ask them how much they do to assist free software development, e.g., by contributing money to free software development projects or by writing free software themselves for general use. By basing your decision partially on this factor, you can help encourage those who profit from free software to contribute to its growth.
Our main FTP host is very busy and only allows a limited number of FTP
logins. Please use one of these other TCP/IP Internet sites that also
provide GNU software via anonymous FTP (program: ftp
, user:
anonymous
, password: your e-mail address, mode:
binary
). If you have FTP access but can't reach one of the
hosts listed below, you can get the software via FTP using the same
protocol from GNU's main FTP host, prep.ai.mit.edu
(IP address is
18.71.0.38
). For more details, get the file
`/pub/gnu/GETTING.GNU.SOFTWARE'.
ftp.sun.ac.za
.
archie.au
(archie.oz
for ACSnet),
cair.kaist.ac.kr
,
utsun.s.u-tokyo.ac.jp
,
ftp.cs.titech.ac.jp
.
ftp.cs.ubc.ca
.
ugle.unit.no
,
ftp.stacken.kth.se
,
isy.liu.se
,
ftp.luth.se
,
ftp.stacken.kth.se
(in `/pub/GNU-VMS'),
ftp.mcc.ac.uk
,
unix.hensa.ac.uk
(get the `README' first),
ftp.win.tue.nl
,
ftp.informatik.tu-muenchen.de
,
ftp.informatik.rwth-aachen.de
,
ftp.funet.fi
,
ftp.denet.dk
,
ftp.eunet.ch
,
nic.switch.ch
,
irisa.irisa.fr
,
ftp.univ-lyon1.fr
,
archive.eu.net
.
labrea.stanford.edu
,
ftp.kpc.com
,
ftp.digex.net
,
ftp.cs.columbia.edu
,
vixen.cso.uiuc.edu
,
mango.rsmas.miami.edu
(VMS GCC),
ftp.hawaii.edu
,
gatekeeper.dec.com
,
ftp.uu.net
(in `/systems/gnu').
Those on JANET can look under src.doc.ic.ac.uk
in
`/gnu'.
Those who can UUCP can get UUCP instructions via electronic mail from:
info@contrib.de (Europe) and toku@dit.co.jp (Japan)
For those without Internet access, see section Free Software Support, for information on getting electronic mail and file transfer via UUCP.
This copylefted software is not presently distributed by the FSF. You can
FTP a fuller list from host prep.ai.mit.edu
in file
`/pub/gnu/GPLedSoftware'. GNU Emacs Lisp Libraries are not
listed. FTP from archive.cis.ohio-state.edu
file
`/pub/gnu/emacs/elisp-archive/LCD-datafile.Z'. Please let either
address on
the top menu
know of additional entries.
john@math.nwu.edu
, John Franks. FTP it from
ftp.acns.nwu.edu
in `/pub/gn/gn-2.07.tar.gz'
ftp.cs.buffalo.edu
in `/pub/sneps'. For details, get the `README'
file.
hertz.ethz.ch
.
For further information, please contact:
Tilo Levante Institut fuer physikalische Chemie Eidgenoessische Technische Hochschule ETH-Zentrum CH-8092 Zuerich Electronic-Mail: tilo@nmr.lpc.ethz.ch Telephone: +41-1-632-4367 Fax: +41-1-632-1021
ftp.cs.rochester.edu
in `/pub/objc'. It requires GCC
2.5.8 or higher. For details contact R. Andrew McCallum at
mccallum@cs.rochester.edu
.
ftp cs.uiuc.edu
in files
`/pub/testing/gct.file/ftp.*'. Send discussion list subscriptions
to: gct-request@cs.uiuc.edu
. Further details from the author
Brian Marick, marick@cs.uiuc.edu
.
Telephone: +1--217--351--7228.
Moldy comes with a manual in LaTeX or PostScript format; it runs on Unix, VMS and MS-DOS systems. FTP the sources fromFor the last few hundred years or so there has been a principle which forms part of the ethos of scientific endeavour. It is that the fruits of one's research should be openly published so that others may learn, use and build upon them. Results may be independently checked by other researchers, contributing to the reliability which distinguishes science from other forms of knowledge. And the benefits are available to the general good. Of course such a high ethical principle is not always honoured, scientists being human and subject to the usual commercial pressures. But it remains as an ideal to strive for.
I have placed my molecular dynamics simulation program, called Moldy, under the GPL because I find the copyleft conditions in close agreement with this spirit of scientific freedom and cooperation. It is a research tool for performing atomistic computer simulations of solids and liquids, and therefore not of widespread use outside the discipline. I wish to make it available to any scientist who wishes to use it, to encourage them to add to the program and to ensure that any improvements are as free as the original code.
earth.ox.ac.uk
.
ftp.lcs.mit.edu
in
the directory `nets'.
isy.liu.se
(130.236.1.3) in file
`/pub/sipp/sipp-3.1.tar.gz'. For more information, contact the
author Jonas Yngvesson, jonas-y@isy.liu.se
ftp.cs.cmu.edu
from directory
`/user/bap/oaklisp/' in files `oaklisp.tar.gz'
and `manuals.{tex,dvi,PS}.tar.gz'. Further information from
bap@learning.scr.siemens.com
.
ftp.x.org
in `misc/sd/sd-30.tar.Z' which contains a compressed archive of
the sources and build materials. The file `sd300bn.exe' is a
self-extracting DOS archive containing a pre-built PC executable. For
details, write wba@apollo.hp.com
.
hobiecat.pcmp.caltech.edu
, consult file
`/pub/chipmunk/README' first.
For more information, write John Lazzaro, lazzaro@cs.berkeley.edu
.
ftp.cis.ufl.edu
. For details, ask
paradise-workers@reed.edu
.
We do not provide support for GNU software on microcomputers because it is peripheral to the GNU Project. However, we are willing to publish information about groups who do support and maintain them. If you are aware of any such efforts, please send the details, including postal addresses, archive sites and mailing lists, to either address on the top menu.
See section MS-DOS Diskettes, and section CD-ROMs, for microcomputer software available from the FSF. Please do not ask us about any other software. We do not maintain any of it and have no additional information.
Boston Computer Society
101 First Avenue - Suite 2
Waltham, MA 02154
USA
Telephone: +1-617-290-5700
Fax: +1-617-290-5744
Electronic-Mail: membership@bcs.org
ftp.funet.fi
in `/pub/amiga/gnu' (Europe).
For info on (or offers to help with) the GCC port and related projects, ask
Leonard Norrgard, vinsci@nic.funet.fi
. For info on the GNU
Emacs port, ask David Gay, dgay@di.epfl.ch
, or
Mark D. Henning, henning@stolaf.edu
. Dave Gilbert,
dgilbert@gamiga.guelphnet.dweomer.org
, will be coordinating work
on Emacs 19. You can get more info via anonymous FTP from
prep.ai.mit.edu
in file `/pub/gnu/MicrosPorts/Amiga'.
atari.archive.umich.edu
,
in `/atari/Gnustuff', maintained by Howard Chu,
howard@lloyd.com
. See USENET newsgroups, such as
comp.sys.atari.st.tech
, for discussions.
The GNU software runs on all Atari 68000 and 68030-based systems; a hard
drive and 4 MB RAM minimum are recommended for using the compilers.
ftp-os2.cdrom.com
in `/pub/os2/2_x/unix/'. Two of
these are of GNU C/C++/Objective-C Compiler to OS/2 2.x, with the GNU
assembler, documentation & both OS/2-specific BSD C libraries.
Eberhard Mattes did the "emx" port, which also features GDB and many
Unix-related library functions like fork
. Programs compiled by this port
also run on a 80386 under DOS. To join the mailing list send email to
listserv@eb.ele.tue.nl
containing `sub emx-list firstname
lastname'. It is in directory `/pub/os2/2_x/unix/emx08h'.
Michael Johnson did the "gcc2" port, now maintained by Colin Jensen. It
is in directory `/pub/os2/2_x/unix/gcc2_254'. To join the mailing
list, ask os2gcc-request@netcom.com
.
tsx-11.mit.edu
in `/pub/linux' (USA) &
nic.funet.fi
in `/pub/OS/Linux' (Europe).
Ask linux-activists-request@niksula.hut.fi
about mailing lists.
See the USENET newsgroups, such as comp.os.linux.misc
, for
discussions.
sunsite.unc.edu
in
`/pub/Linux/distributions/debian'.
For more information about the Debian project and how to get involved,
see `/pub/Linux/distributions/debian/info'.
info-gnu-msdos-request@sun.soe.clarkson.edu
about
MS-DOS ports of GNU programs and related mailing lists. Or anonymous FTP
files `/pub/gnu/MicrosPorts/MSDOS*' from prep.ai.mit.edu
.
The FSF is distributing MS-DOS ports of many GNU programs on both
the section May 1994 Source Code CD-ROM and the section MS-DOS Diskettes.
We have Free Software Foundation T-shirts, with a drawing by Cambridge artist Jamal Hannah. They are available in two colors, Natural and Black. Natural is an off-white, unbleached, undyed, environment-friendly cotton, printed with black ink, and is great for tye-dyeing or displaying as is. Black is printed with white ink and is perfect for late night hacking. All shirts are thick 100% cotton, and are available in sizes M, L, XL and XXL.
The front of the T-shirt has an image of a GNU hacking at a workstation with the text "GNU's Not Unix" above and the text "Free Software Foundation" below. We have added a copy of the GNU General Public License to the T-shirt's back, which used to be blank.
Use the see section Free Software Foundation Order Form, to order your shirt, and consider getting one as a present for your favorite hacker!
------------------------------------------------------------------------------
...imagine how little used calculus would have been if a court had decided that no one could study, use or do research on it without paying a royalty to Newton's designated heirs.
- The Independent, October 5, 1992
------------------------------------------------------------------------------
Wishes for this issue are for:
gnu@prep.ai.mit.edu
to make
arrangements.
gnu@prep.ai.mit.edu
for more information.
gnu@prep.ai.mit.edu
for the task list and coding standards.
gnu@prep.ai.mit.edu
.
A special thank gnu to Lisa "Opus" Goldstein who ran the FSF Business Office for many years, and has also been the FSF Treasurer. We will miss her as she moves to China.
Thanks to all those mentioned elsewhere in this Bulletin!
Thanks to the Artificial Intelligence Laboratory, Laboratory for Computer Science, and Project Athena at MIT for their invaluable assistance.
Thanks to the many companies and organizations who have bought our Deluxe Distribution package.
Thanks to Len Kagelmacher and Scott Ewing for helping the FSF coordinate all the volunteers in the GNU Project.
Thanks to the Japan Unix Society for their large grant to support Hurd development. For their assistance in Japan, thanks to: Nobuyuki Hikichi, Mieko Hikichi, Ken'ichi Handa, Prof. Masayuki Ida, and Yukitoshi Fujimura. Thanks to Addison-Wesley Publishers Japan Ltd., A.I. Soft, Village Center, Inc., Shosen Book Tower, Shosen Grande, ASCII Corporation and many others in Japan, for their continued donations and support.
Thanks to the Sun Users Group, PCI, and the USENIX Association, for donating booths at their conferences. Thanks to all the volunteers who helped the GNU Project at these and other conferences. Thanks to Wired Magazine and Barry Meikle of the University of Toronto Bookstore for donating ad space in their separate publications. Thanks again to the Open Software Foundation for their continued support, and to Cygnus Support for assisting Project GNU in many ways. Thanks to Warren A. Hunt, Jr. and Computational Logic, Inc. for their donation and support. Thanks to Aalborg University for donating a part-time programmer.
Thanks go out to all those who have either lent or donated machines, including Doug Lewan for a Sun workstation; an anonymous donor for a 4mm DAT cartridge drive; IBM Corp. for an Exabyte tape drive and an RS/6000; Hewlett-Packard for two 80486, six 68030 and four Spectrum computers; Brewster Kahle of Thinking Machines Corp. for a Sun-4/110; CMU's Mach Project for a Sun-3/60; Intel Corp. for their 386 machine; NeXT for their workstation; the MIT Media Laboratory for a Hewlett-Packard 68020; SONY Corp. and Software Research Associates, Inc., both of Tokyo, for three SONY News workstations; the MIT Laboratory of Computer Science for the DEC MicroVAX; the Open Software Foundation for two Compaq 386s; Delta Microsystems for an Exabyte tape drive; an anonymous donor for 5 IBM RT/PCs; Liant Software Corp. for 5 VT100s; Jerry Peek for a 386 machine; NCD Corporation for an X terminal; Interleaf, Inc., for the loan of a scanner; and Rocky Bernstein for much IBM RT hardware and manuals.
Thanks to all who have contributed ports & extensions, as well as all who have sent in other source code, documentation, & good bug reports.
Thanks to all those who sent money and offered other kinds of help.
Thanks also to all those who support us by ordering manuals, distribution tapes, diskettes, and CD-ROMs.
The creation of this bulletin is our way of thanking all who have expressed interest in what we are doing.
If you appreciate Emacs, GNU CC, Ghostscript, and other free software, you may wish to help us make sure there is more in the future--remember, donations translate into more free software!
Your donation to us is tax-deductible in the United States. We gladly accept any currency, although the U.S. dollar is the most convenient.
If your employer has a matching gifts program for charitable donations, please arrange to have your donation matched by your employer (or, in some cases, by Cygnus Support (see section Cygnus Matches Donations!). If you do not know, please ask your personnel department. Also try and get the FSF listed on the list of organizations for your company's matching gifts program.
$500 $250 $100 $50 other $________ Other currency:________
Circle the amount you are donating, cut out this form, and send it with your donation to:
Free Software Foundation 675 Massachusetts Avenue Cambridge, MA 02139-3309 USA
You can charge a donation to any of Visa, Mastercard, JCB, Diner's Club, or Carte Blanche. Charges may also be faxed to +1-617-492-9057; in Japan fax to: 0031-13-2473 (KDD) or 0066-3382-0158 (IDC).
Card type: __________________ Expiration Date: _____________ Account Number: _____________________________________________ Your Signature: _____________________________________________
To encourage cash donations to the Free Software Foundation, Cygnus Support will continue to contribute corporate funds to FSF to accompany gifts by its employees, and by its customers and their employees.
Donations payable to the Free Software Foundation should be sent by
eligible persons to Cygnus Support, which will add its gifts and forward the
total to the FSF each quarter. The FSF will provide the contributor with a
receipt to recognize the contribution (which is tax-deductible on U.S.
tax returns). For more information, please contact Cygnus at
info@cygnus.com.
Cygnus Support 1937 Landings Drive Mountain View, CA 94043 USA Telephone: 415-903-1400 +1-800-Cygnus1 Fax: 415-903-0122 Electronic-Mail:info@cygnus.com
FTP:ftp.cygnus.com
WWW: `http://www.cygnus.com/'
All items are distributed with permission to copy and to redistribute. Texinfo source for each manual and source for each reference card is on the appropriate tape, diskette, or CD-ROM; the prices for these magnetic media do not include printed documentation. All items are provided on an "as is" basis, with no warranty of any kind. Please allow six weeks for delivery (though it won't usually take that long). PRICE AND CONTENTS MAY CHANGE WITHOUT NOTICE AFTER January 31, 1995. Unix and VMS Software --------------------- The following tapes in the formats indicated (see section Tapes, for contents): Please circle the dollar amount for each tape you order. Reel to Sun (1) HP IBM (2) Exabyte DAT reel RS/6000 Unix tar Unix tar Unix tar Unix tar Unix tar Unix tar 9-track QIC-24 16-track QIC-150 1600 bpi DC300XLP DC600HC DC600A 1/2" reel 1/4" c.t. 1/4" c.t. 1/4" c.t. 8mm c.t. 4mm c.t. (c.t. = cartridge tape) Emacs $200 $210 $230 $215 (3) $205 $225 Languages $200 $210 $230 $215 $205 $225 Utilities $200 $210 $230 $215 $205 $225 4.4BSD-Lite $200 $210 $230 $215 $205 $225 Scheme $200 $210 $230 $215 $205 $225 X11r5-Required $200 $210 $230 $215 $205 $225 X11r5-Optional $200 $210 $230 $215 $205 $225 X11r6-Required $200 $210 $230 $215 $205 $225 X11r6-Optional $200 $210 $230 $215 $205 $225 (1) Sun tapes can be read on some other Unix systems. (2) IBM RS/6000 tapes can be read on some other Unix systems. (3) The IBM Emacs tape also has binaries for GNU Emacs. Subscriptions, 4 updates for one year (see section Tape & CD-ROM Subscription Service): Emacs $600 $630 $690 $645 $615 $675 Languages $600 $630 $690 $645 $615 $675 Utilities $600 $630 $690 $645 $615 $675 X11r6-Required $600 $630 $690 $645 $615 $675 Subtotal $ ______ Please put total of the above circled amounts here. The following, on 1600 bpi reel-to-reel 9 track 1/2" tapes, in VMS BACKUP format (aka interchange format) (see section VMS Emacs and VMS Compiler Tapes): ____ @ $195 = $ ______ VMS Emacs, GNU Emacs source & executables only. ____ @ $195 = $ ______ VMS Compiler, GCC, GAS, and Bison source and executables only. FSF Deluxe Distribution (see section The Deluxe Distribution): ____ @ $5000 = $ ______ The Deluxe Distribution, with manuals, etc. Machine: _____________________________________________________________________ Operating system: ____________________________________________________________ Media type: __________________________________________________________________ CD-ROM, in ISO 9660 format (see section Compiler Tools Binaries CD-ROM): ____ @ $240 = $ ______ GNU Compiler Tools Binaries CD-ROM for corporations and other organizations. ____ @ $60 = $ ______ GNU Compiler Tools Binaries CD-ROM for individuals. Source Code CD-ROM, in ISO 9660 format (see section May 1994 Source Code CD-ROM): *** NEW !!! *** ____ @ $400 = $ ______ GNU Source Code CD-ROM, May 1994 edition with X11r6, for corporations and other organizations. NEW !!! ____ @ $100 = $ ______ GNU Source Code CD-ROM, May 1994 edition with X11r6, for individuals. NEW !!! Source Code CD-ROM, in ISO 9660 format (see section November 1993 Source Code CD-ROM): *** PRICE REDUCED !!! *** ____ @ $260 = $ ______ GNU Source Code CD-ROM, November 1993 edition with X11r5, for corporations & other organizations. PRICE REDUCED !!! ____ @ $65 = $ ______ GNU Source Code CD-ROM, November 1993 edition with X11r5, for individuals. PRICE REDUCED !!! Subscriptions, next 4 updates, of the Source Code CD-ROM, in ISO 9660 format (see section Tape & CD-ROM Subscription Service): ____ @ $1200 = $ ______ Subscription to the GNU Source Code CD-ROM for corporations and other organizations. ____ @ $300 = $ ______ Subscription to the GNU Source Code CD-ROM for individuals. MS-DOS Software --------------- The following sources and executables for MS-DOS, on 3.5" 1.44MB diskettes (see section MS-DOS Diskettes): *** BEING UPDATED !!! *** ____ @ $ 90 = $ ______ Emacs diskettes, GNU Emacs, for 80386 and up. BEING UPDATED !!! ____ @ $ 80 = $ ______ DJGPP diskettes, GCC version 2, for 80386 and up (also on the "Compiler Tools Binaries CD-ROM"). ____ @ $ 85 = $ ______ Selected Utilities diskettes, 8086 and up. ____ @ $ 40 = $ ______ Windows diskette, GNU Chess and gnuplot for Microsoft Windows. Manuals ------- The following manuals (see section GNU Documentation): ____ @ $ 25 = $ ______ GNU Emacs version 19 manual, unit price for 1 to 5 copies, about 418 pages, new 9th edition with a reference card. ____ @ $ 17 = $ ______ GNU Emacs version 19 manuals, unit price for 6 or more. *** UPDATED !!! *** ____ @ $ 50 = $ ______ GNU Emacs Lisp Reference version 19 manual, about 756 pages in 2 volumes. UPDATED for Emacs 19.23!! ____ @ $200 = $ ______ A box of 5 GNU Emacs Lisp Reference version 19 manuals. UPDATED for Emacs 19.23!! *** UPDATED !!! *** ____ @ $ 50 = $ ______ Using and Porting GNU CC version 2.5, about 428 pages. UPDATED !!! ____ @ $ 50 = $ ______ GNU C Library Reference Manual, about 670 pages. ____ @ $ 50 = $ ______ GNU Emacs Calc manual, about 596 pages, with a reference card. ____ @ $ 20 = $ ______ Debugging with GDB, about 182 pages, with a reference card. *** UPDATED !!! *** ____ @ $ 20 = $ ______ Texinfo manual, about 248 pages. UPDATED !!! ____ @ $ 20 = $ ______ Gawk manual, about 188 pages. ____ @ $ 20 = $ ______ Make manual, about 158 pages. ____ @ $ 20 = $ ______ Bison manual, about 98 pages, with a reference card. ____ @ $ 20 = $ ______ Flex manual, about 124 pages, with a reference card. ____ @ $ 15 = $ ______ Termcap manual, 68 pages. Older Manuals ------------- ____ @ $ 25 = $ ______ GNU Emacs version 18 manual, unit price for 1 to 5 copies, about 410 pages, with a reference card. ____ @ $ 17 = $ ______ GNU Emacs version 18 manuals, unit price for 6 or more. ____ @ $ 50 = $ ______ GNU Emacs Lisp Reference version 18 manual, about 614 pages in 2 volumes. ____ @ $200 = $ ______ A box of 5 GNU Emacs Lisp Reference version 18 manuals. Reference Cards --------------- The following reference cards, unit price, without the manuals: ____ @ $ 2 = $ ______ GNU Emacs version 18 reference card. ____ @ $ 2 = $ ______ GNU Emacs version 19 reference card. ____ @ $ 2 = $ ______ GNU Emacs Calc reference card. ____ @ $ 2 = $ ______ GDB reference card. ____ @ $ 2 = $ ______ Bison reference card. ____ @ $ 2 = $ ______ Flex reference card. The following reference cards, in packets of ten: ____ @ $ 10 = $ ______ GNU Emacs version 18 reference cards. ____ @ $ 10 = $ ______ GNU Emacs version 19 reference cards. ____ @ $ 10 = $ ______ GNU Emacs Calc reference cards. ____ @ $ 10 = $ ______ GDB reference cards. ____ @ $ 10 = $ ______ Bison reference cards. ____ @ $ 10 = $ ______ Flex reference cards. T-shirts -------- GNU/FSF T-shirts, thick 100% cotton (see section FSF T-shirt): The back of the t-shirt, which used to be blank, now has a copy of the GNU General Public License on it. ____ @ $ 15 = $ ______ Size M ____ natural ____ black. ____ @ $ 15 = $ ______ Size L ____ natural ____ black. ____ @ $ 15 = $ ______ Size XL ____ natural ____ black. ____ @ $ 15 = $ ______ Size XXL ____ natural ____ black. ------ Subtotal $ ______ Tax and Shipping Costs ---------------------- + $ ______ In Massachusetts: add 5% sales tax, or give tax exempt number. + $ ______ In Alaska, Hawaii, or Puerto Rico for shipping: for GNU Emacs Lisp Reference and GNU Emacs Calc manuals, add $5 each, or $20 per box. For all other items, add $5 base charge, then $1 per item except reference cards; i.e., shipping for all other items = $5 + $1 * n. Add $20 for each tape or CD-ROM subscription. + $ ______ Outside of U.S., Canada, and Puerto Rico for shipping: Add $20 base charge, and then add $10 more for *each* item (except reference cards) in the order; i.e., shipping for all other items = $20 + $10 * n. Add $120 for each tape or CD-ROM subscription. + $ ______ Optional (tax-deductible in the U.S.) donation. ------ TOTAL $ ______ We pay for shipping via UPS ground transportation in the contiguous 48 states and Canada. Shipping Information -------------------- Name: ________________________________________________________________________ Mail Stop/Dept. Name: ________________________________________________________ Organization: ________________________________________________________________ Street Address: ______________________________________________________________ City/State/Province: _________________________________________________________ Zip Code/Postal Code/Country: ________________________________________________ Telephone number in case of a problem with your order. For international orders, please include a FAX number. _______________________ Orders filled only upon receipt of check, money order or credit card order in U.S. dollars. Unpaid orders will be returned to the sender. We do not have the staff to handle the billing of unpaid orders. Please help keep our lives simple by including your payment with your order. For orders from outside the U.S.: Orders must be paid in U.S. dollars. You are responsible for paying all duties, tariffs, and taxes. If you refuse to pay the charges, the shipper will return or abandon the order. Please make checks payable to the "Free Software Foundation". For Credit Card Orders: The Free Software Foundation takes these credit cards: Visa, Mastercard, JCB, Diner's Club, and Carte Blanche. Please note that we are charged about 5% of an order's total amount in credit card processing fees. Please consider paying by check instead, or adding on a 5% donation to make up the difference. To place a credit card order, please give us this information: Card type: ___________________________________________________________________ Account Number: ______________________________________________________________ Expiration Date: _____________________________________________________________ Your Signature: ______________________________________________________________ For wire transfers orders: Call or write us for details. Please mail orders to: Free Software Foundation 675 Massachusetts Avenue Version: June 1994 Info Bull Cambridge, MA 02139 USA +1-617-876-3296 FAX: +1-617-492-9057 FAX numbers in Japan: PRICES AND CONTENTS MAY CHANGE 0031-13-2473 (KDD) WITHOUT NOTICE AFTER January 31, 1995. 0066-3382-0158 (IDC)
------------------------------------------------------------------------------
------- Free Software Foundation, Inc | | Electronic Mail: gnu@prep.ai.mit.edu | stamp | 675 Massachusetts Avenue | | Cambridge, MA 02139-3309 | here | USA | | -------
------------------------------------------------------------------------------
This document was generated on 7 May 1998 using the texi2html translator version 1.52.
Please send FSF & GNU inquiries & questions to gnu@gnu.org. There are also other ways to contact the FSF.
Please send comments on these web pages to webmasters@www.gnu.org, send other questions to gnu@gnu.org.
Copyright (C) 1994 Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110, USA
Verbatim copying and distribution of this entire article is permitted in any medium, provided this notice is preserved.