| [Top] | [Contents] | [Index] | [ ? ] |
Copyright © 1995/96/97/98/99/2000 Mark Burgess
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the section entitled "GNU General Public License" is included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the section entitled "GNU General Public License" may be included in a translation approved by the author instead of in the original English.
This manual corresponds to CFENGINE Edition for version as last updated .
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
In this manual the word "host" is used to refer to a single computer system -- i.e. a single machine which has a name termed its "hostname".
2.1 What is cfengine and who can use it? 2.2 Site configuration the problem 2.3 Key Concepts the solution 2.4 Functionality an advertisement
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine is a tool for setting up and maintaining BSD and System-5-like
operating system optionally attached to a TCP/IP network. You can think
of cfengine as a very high level language--much higher level than Perl
or shell: a single statement can result in many hundreds of operations
being performed on multiple hosts. Cfengine is good at performing a lot
of common system administration tasks, and allows you to build on its
strengths with your own scripts. You can also use it as a netwide
front-end for cron. Once you have set up cfengine, you'll be
free to use your time being like a human being, instead of playing R2-D2
with the system.
The main purpose of cfengine is to allow you to create a single, central system configuration which will define how every host on your network should be configured in an intuitive way. An interpreter runs on every host on your network and parses the master file (or file-set); the configuration of each host is checked against this file and then, if you request it, any deviations from the defined configuration are fixed automatically. You do not have to mention every host specifically by name in order to configure them: instead you can refer to the properties which distinguish hosts from one another. Cfengine uses a flexible system of "classes" which helps you to single out a specific group of hosts with a single statement.
Originally cfengine was conceived of as a tool only for the superuser, but during the course of its development it has become clear that it can also be used as a scripting language by ordinary users. It is a handy tool for tidying your old junk files and for making `watchdog' scripts to manage the access rights and permissions on your files when collaborating with other users. As a bonus it contains a text editing language which can be used to perform controlled edits of line-based text files.
Cfengine grew out of the need to control the accumulation of complex shell scripts used in the automation of key system maintenance at Oslo. There were very many scripts, written in shell and in perl, performing tasks such as file tidying, find-database updates, process checking and several other tasks. In a heterogeneous environment, shell-scripts work very poorly: shell commands have differing syntax across different operating systems, the locations and names of key files differ. In fact, the non-uniformity of unix was a major headache. Scripts were filled with tests to determine what kind of operating system they were being run on, to the point where they became so complicated an unreadable that no-one was quite sure what they did anymore. Other scripts were placed only on the systems where they were relevant, out of sight and out of mind. It quickly became clear that our dream solution would be to replace this proliferation of scripts by a single file containing everything to be checked on every host on the network. By defining a new language, this file could hide all of the tests by using classes (a generalized `switch/case' syntax) to label operations and improve the readability greatly. The gradual refinement of this idea resulted in the present day cfengine.
The remainder of this manual assumes that you know a little about BSD/System-5 systems and have everyday experience in using either the C-shell or the Bourne shell, or their derivatives. If you are experienced in system administration, you might like to skip the earlier chapters and turn straight to the example in the section Example configuration file of the Reference manual. This is the probably quickest way to learn cfengine for the initiated. If you are not so familiar with system administration and would like a more gentle introduction, then we begin here...
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
To the system administrator of a small network, with just a few workstations or perhaps even a single mainframe system, it might seem superfluous to create a big fuss about the administration of the system. After all, it's easy to `fix' things manually should any problems arise, making a link here, writing a script there and so on -- and its probably not even worth writing down what you did because you know that it will always be easy to fix next time around too... But networks have a tendency to expand and--before you know it--you have five different types of operating system and each type of system has to be configured in a special way, you have to make patches to each system and you can't remember whether you fixed that host on the other side of the building... Also, you discover fairly quickly that what you thought of as BSD or System 5 is not as standard as you thought and that none of your simple scripts that worked on one system work on the others without a considerable amount of hacking and testing. You try writing a script to help you automate the task, but end up with an enormous number of `if..then..else..' tests which make it hard to see what is really going on.
To manage a network with many different flavours of operating system, in a systematic way, what is needed is a more disciplined way of making changes which is robust against re-installation. After all, it would be tragic to spend many hours setting up a system by hand only to lose everything in an unfortunate disk-crash a week or even a year later when you have forgotten what you had to do. Upgrades of the operating system software might delete your carefully worked out configuration. What is needed is a separate record of all of the patches required on all of the systems on the network; a record which can be compared to the state of each host at any time and which a suitable engine can use to fix any deviations from that reference standard.
The idea behind cfengine is to focus upon a few key areas of basic system administration and provide a language in which the transparency of a configuration program is optimal. It eliminates the need for lots of tests by allowing you to organize your network according to "classes". From a single configuration file (or set of files) you can specify how your network should be configured -- and cfengine will then parse your file and carry out the instructions, warning or fixing errors as it goes.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Some of the important issues in system administration which cfengine can help with.
2.3.1 Control files textfiles which configure 2.3.2 Network interface ethernet parameters 2.3.3 Network File System (NFS) or distribution? sharing resources 2.3.4 Name servers (DNS) setting up a name service 2.3.5 Monitoring important files permission and ownership 2.3.6 Making links aliases
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
One of the endearing characteristics of BSD and system 5 systems is that they are configured through human-readable text files. To add a new user to the system you edit `/etc/passwd', to add a new disk you must edit `/etc/fstab' etc. Many applications are also configured with the help of text files. When installing a new system for the first time, or when changing updating the setup of an old system you are faced with having to edit lots of files. In some cases you will have to add precisely the same line to the same file on every system in your network as a change is made, so it is handy to have a way of automating this procedure so that you don't have to load every file into an editor by hand and make the changes yourself. This is one of the tasks which cfengine will automate for you.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Each host which you connect to an ethernet-based network running TCP/IP
protocols must have a so-called `net interface'. This network interface
must be configured before it will work. Normally one does this with the
help of the ifconfig command. This can also be checked and
configured automatically by cfengine.
Network configuration involves telling the interface hardware what the internet (IP) address of your system is, so that it knows which incoming `packets' of data to pay attention to. It involves telling the interface how to interpret the addresses it receives by setting the `netmask' for your network (see below). Finally you must tell it which dummy address is to be used for messages which are broadcast to all hosts on your network simultaneously (see the reference manual).
Cfengine's features are mainly meant for hosts which use static IP addresses, if you are using DHCP clients then you will not need the net configuration features.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Probably the first thing you are interested in doing with a network (after you've had your fill of the world wide web) is to make your files available to some or all hosts on the network, no matter where in your corporate empire (or university dungeon) you might be sitting. In other words, if you have a disk which is physically connected to host A, you would like to make the contents of that disk available to hosts B, C, D... etc. NFS (the network filesystem) does this for you. The process works by `filesystems'.
A filesystem is one partition of a disk drive -- or one unit of disk space which can be accessed by a single `logical device' `/dev/something'. To make a filesystem available to other hosts you have to do three things.
Only after all three of these have been done will a filesystem become available across the network. Cfengine will help you with the last two in a very transparent way. You could also use the text-editing facility in cfengine to edit the exports file, but there are other ways update the exports file using netgroups which we shall not go into here. If you are in doubt, look up the manual page on exports.
Some sites prefer to minimize the use of NFS filesystems, to
avoid one machine being dependent on another. They prefer to
make a local copy of the files on a remote machine instead.
Traditionally programs like rdist have been used for
this purpose. You may also use cfengine to copy files in this
way, See section 7.2.1 Remote file distribution.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
There are two ways to specify addresses on the internet (called IP addresses). One is to use the textual address like `ftp.uu.net' and the other is to use the numerical form `192.48.96.9'. Alas, there is no one-to-one correspondence between the numerical addresses and the textual ones, thus a service is required to map one to the other.
The service is performed by one or more special hosts on the network called nameservers. Each host must know how to contact a nameserver or it will probably hang the first time you give it an IP address. You tell it how to contact a nameserver by editing the text-file `/etc/resolv.conf'. This file must contain the domain name for your domain and a list of possible nameservers which can be contacted, in order of priority. Because this is a special file which every host must have, you don't have to use the editing facilities in cfengine explicitly. You can just define the nameservers for each host in the cfengine file and cfengine will do the editing automatically. If you want to change the priority of nameservers later, or even change the list then a simple change of one or two lines in the configuration file will enable you to reconfigure every host on your network automatically without having to do any editing yourself!
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Security is an important issue on any system. In the busy life of a system administrator it is not always easy to remember to set the correct access rights on every file and this can result in either a security breach or problems in accessing files.
A common scenario is that you, as administrator, fetch a new package using ftp, compile it and install it without thinking too carefully. Since the owner and permissions of the files in an ftp archive remains those of the program author, it often happens that the software is left lying around with the owner and permissions as set by the author of the program rather than any user-name on your system. The user-id of the author might be anybody on your system -- or perhaps nobody at all! The files should clearly be owned by root and made readable and unwritable to normal users.
Simple accidents and careless actions under stress could result in, say, the password file being writable to ordinary users. If this were the case, the security of the entire system would be compromised. Cfengine therefore allows you to monitor the permissions, ownership and general existence of files and directories and, if you wish, correct them or warn about them automatically.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
One of the difficulties with having so many different variations on the theme of BSD and system 5 based operating systems is that similar files are not always where you expect to find them. They have different names or lie in different directories. The usual solution to the problem is to make an alias for these files, or a pointer from one filename to another. The name for such an alias is a symbolic link.
It is often very convenient to make symbolic links. For example, you might want the sendmail configuration file `/etc/sendmail.cf' to be a link to a global configuration file, say,
`/usr/local/mail/etc/sendmail.cf' |
on every single host on your network so that there is only one file to edit. If you had to make all of these links yourself, it would take a lifetime. Cfengine will make such a link automatically and check it each time it is run. You can also ask it to tidy up old links which have been left around and no longer point to existing files. If you reinstall your operating system later it doesn't matter because all your links are defined in your cfengine configuration file, recorded for all time. Cfengine won't forget it, and you won't forget it because the setup is defined in one central place.
Cfengine will also allow you to make hard links to regular files, but not other kinds of file. A hard link to a symbolic link, is the same as a hard link to the file the symbolic link points to.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The notes above give you a rough idea of what cfengine can be used for. Here is a summary of cfengine's capabilities.
How do you run cfengine? You can run it as a cron job, or you can run it
manually. You may run cfengine scripts/programs as often
as you like. Each time you run a script, the engine determines whether
anything needs to be done -- if nothing needs to be done, nothing is
done! If you use it to monitor and configure your entire network from a
central file-base, then the natural thing is to run cfengine daily with
the help of cron. (see the reference manual).
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
3.1 What you must have in a cfengine program a skeleton cfengine program 3.2 Program structure an overview 3.3 Optional features in cfengine spices and conveniences 3.4 Invoking cfengine from the command line 3.5 CFINPUTS environment variable the cfengine search path 3.6 What to aim for
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
A cfengine configuration file for a large network can become long and complex so, before we get down to details, let's try to strip away the complexity and look only to the essentials.
Each cfengine program or configuration file is a list of declarations of items to be checked and perhaps fixed. You begin by creating a file called `cfengine.conf'. The simplest meaningful file you can create is something like this:
# Comment... control: actionsequence = ( links ) links: /bin -> /usr/bin |
The example above checks and makes (if necessary) a link from `/bin' to `/usr/bin'. Let's examine this example more closely. In a cfengine program:
name=( list ) are
used to assign the value on the right hand side to the name on the left hand side
of the equals sign.
In simple example above has three of the four types of object described
above. The control: section of any program tells cfengine how to
behave. In this example it adds the action links to the
actionsequence. For links you could replace some other action.
The essential point is that, if you don't have an action sequence, your
cfengine program will do absolutely nothing! The action sequence is a
list which tells cfengine what do to and in which order.
The links: section of the file tells cfengine that what follows
is a number of links to be made. If you write this part of the file,
but forget to add links to the actionsequence, then nothing will be
done! You can add any number of links in this part of the file and they
will all be dealt with in order when--and only when--you write
links in the action sequence.
To summarize, you must have:
Now let's think a bit about how useful this short example program is. On a SunOS system, where the directory `/bin' is in fact supposed to be a link, such a check could be useful, but on some other system where `/bin' is a not a link but a separate directory, this would result in an error message from cfengine, telling you that `/bin' exists and is not a link. The lesson is that, if we want to use cfengine to make one single program which can be run on any host of any type, then we need some way of restricting the above link so that it only gets checked on SunOS systems. We can write the following:
# Comment...
control:
actionsequence = ( links )
links:
sun4::
/bin -> /usr/bin
# other links
osf::
# other links
|
The names which have double colons after them are called classes
and they are used to restrict a particular action so that it only gets
performed if the host running the program is a member of that class. If
you are familiar with C++, this syntax should make you think of classes
definitions in C++. Classes works like this: the names above
sun4, sun3, osf etc. are all internally defined by
cfengine. If a host running, say, the OSF operating system executes the
file it automatically becomes a member of the class osf. Since
it cannot be a member more than one of the above, this distinguishes
between different types of operating system and creates a hidden
if..then...else test.
This is the way in which cfengine makes decisions. The key idea is that actions are only carried out if they are in the same class as the host running the program. Classes are dealt with in detail in the next chapter.
Now let's see how to add another kind of action to the action sequence.
# Comment... control: actionsequence = ( tidy links ) links: /bin -> /usr/bin tidy: /tmp pattern=* age=7 recurse=inf |
We have now added a new kind of declaration called tidy: which
deletes files. In the example above, we are looking at files in the
directory `/tmp' which match the pattern `*' and have not been
accessed for more than seven days. The search for these files descends
recursively down any number of subdirectories.
To make any of this happen we must add the word tidy to the action
sequence. If we don't, the declaration will be ignored. Notice also
that, regardless of the fact that links: comes before
tidy:, the order in the action sequence tells us that all
tidy actions will be performed before links:.
The above structure can be repeated to build up a configuration file or script.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
To summarize the previous section, here is a sketch of a typical cfengine configuration program showing a sensible structure. The various sections are listed in a sensible order which you would probably use in the action sequence.
An individual section-declaration in the program looks something like this:
action-type:
class1::
list of things to do...
class2::
list of things to do...
|
action-type is one of the following reserved words:
groups, control, homeservers, binservers, mailserver, mountables, import, broadcast, resolve, defaultroute, directories, miscmounts, files, ignore, tidy, required, links, disable, shellcommands, editfiles, processes |
The order in which items are declared is not to be confused with the
order in which they are executed. This is determined by the
actionsequence, (see the reference manual). Probably you will want to
coordinate the two so that they match as far as possible.
For completeness, here is a complete summary of the structure of a very general cfengine configuration program. The format is free and use of space is unrestricted, though it is always a good idea to put a space in front before and after parentheses when defining variables.
######################################################################
#
# Example of structure
#
######################################################################
groups:
group1 = ( host host ... )
group2 = ( host host ... )
...
######################################################################
control:
class::
site = ( mysite )
domain = ( mydomain )
...
actionsequence =
(
action name
....
)
mountpattern = ( mountpoint )
homepattern = ( wildcards matching home directories )
addinstallable = ( foo bar )
addclasses = ( foo bar )
######################################################################
homeservers:
class::
home servers
binservers:
class::
binary servers
mailserver:
class::
mail server
mountables:
class::
list of resources
######################################################################
import:
class:: include file
class:: include file
######################################################################
broadcast:
class:: ones # or zeros / zeroes
defaultroute:
class:: my-gw
######################################################################
resolve:
any::
list of nameservers
...
|
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine doesn't do anything unless you ask it to. When you run a cfengine program it generates no output unless it finds something it believes to be wrong. It does not carry out any actions unless they are declared in the action sequence.
If you like, though, you can make cfengine positively chatty. Cfengine can be run with a number of command line options (see the reference manual). If you run the program with the `-v' or `--verbose' options, it will supply you cheerily with a resume of what it is doing. Certain warning messages also get printed in verbose mode, so it is a useful debugging tool.
You can ask cfengine to check lots of things -- the timezone for
instance, or the domain name. In order for it to check these things, it
needs some information from you. All of the switches and options which
change the way in which cfengine behaves get specified either on the
command line or in the control: section of the control file.
Some special control variables are used for this purpose. Here is a
short example:
control:
domain = ( mydomain.no )
netmask = ( 255.255.255.0 )
timezone = ( MET CET )
mountpattern = ( /mydomain/mountpoint )
actionsequence =
(
checktimezone # check time zone
netconfig # includes check netmask
resolve # includes domain
mountinfo # look for mounted disks under mountpattern
)
|
To get verbose output you must run cfengine with the appropriate command line option `--verbose' or `-v'.
Notice that setting values has a special kind of syntax: a variable name, an equals sign and a value in parentheses. This tells you that the quantity of the left hand side assumes the value on the right hand side. There are lots of questions you might ask at this point. The answers to these will be covered as we go along and in the next chapter.
Before leaving this brief advertisement for control parameters, it is
worth noting the definition of mountpattern above. This declares
a directory in which cfengine expects to find mounted disks. It will be
explained in detail later, for now notice that this definition looks
rather stupid and inflexible. It would be much better if we could use
some kind of variables to define where to look for mounted filesystems.
And of course you can...
Having briefly scraped the surface of what cfengine can do, turn to the example and take a look at what a complete program can look like, (see the reference manual). If you understand it, you might like to skip through the rest of the manual until you find what you are looking for. If it looks mysterious, then the next chapter should answer some questions in more depth.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine may be invoked in a number of ways. Here are some examples:
host% cfengine host% cfengine --file myfile host% cfengine -f myfile -v -n host% cfengine --help |
The first of these (the default command, with no arguments) causes
cfengine to look for a file called `cfengine.conf' in the current
directory and execute it silently. The second command reads the file
`myfile' and works silently. The third works in verbose mode and
the -n option means that no actions should actually be carried
out, only warnings should be printed. The final example causes cfengine
to print out a list of its command line options.
The complete list of options is listed in the summary at the beginning
of this manual, or you can see it by giving the -h option,
(see the reference manual).
In addition to running cfengine with a filename, you can also treat cfengine files as scripts by starting your cfengine program with the standard shell line:
#!/local/gnu/bin/cfengine -f # # My config script # |
chmod
shell command, you can execute the program just by typing its
name--i.e. without mentioning cfengine explicitly at all.
As a novice to cfengine, it is advisable to check all programs with the
-n option before trusting them to your system, at least until you
are familiar with the behaviour of cfengine. This `safe' option allows
you to see what cfengine wants to do, without actually committing
yourself to doing it.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Whenever cfengine looks for a file it asks a question: is the filename
an absolute name (that is a name which begins from `/' like
/usr/file), is it a file in the directory in which you invoke
cfengine or is it a file which should be searched for in a special
place?
If you use an absolute filename either on the command line using
-f or in the import section of your program (a name which
begins with a slash '/'), then cfengine trusts the name of the file you
have given and treats it literally. If you specify the name of the
file as simple `.' or `-' then cfengine reads its input from the
standard input.
If you run cfengine without arguments (so that the default filename is
`cfengine.conf') or you specify a file without a leading slash in
the import section, then the value of the environment variable
CFINPUTS is prepended to the start of the file name. This allows
you to keep your configuration in a standard place, pointed to by
CFINPUTS. For example:
host# setenv CFINPUTS /usr/local/gnu/lib/cfengine/inputs host# cfengine -f myfile |
In this example, cfengine tries to open
`/usr/local/gnu/lib/cfengine/inputs/myfile'.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
If you are a beginner to cfengine, you might not be certain exactly how you want to use it. Here are some hints from Dr. Daystrom about how to get things working quickly.
cron.
Running cfengine from cron means that it will be run in parallel on your systems. Cfengine on one host does not have to wait for cfengine on another host to complete.
cfservd on all your systems so that cfengine can be executed
remotely, so that you can immediately "push" changes to all your
hosts with cfrun. Think carefully about whom you wish to give permission to run
cfengine from the net, See section 7.3 Configuring cfservd. Set up you
`cfservd.conf' file accordingly. You can also use this daemon to
grant access rights for remote file copying.
Cfrun polls all your hosts serially and gives you a concatenated indexed list of problems on all hosts. The disadvantage with cfrun is that each host has to wait its turn.
cfservd to the system startup scripts, or to `inittab'
so that it starts when you boot your system.
When you have set up these components, you can sit back and edit the configuration files and watch things being done.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
4.1 Classes 4.2 Variable substitution 4.3 Undefined variables 4.4 Defining classes and making exceptions making decisions 4.5 The generic class anya wildcard 4.6 Debugging tips nullifying classes 4.7 Access control specifying user access to programs 4.8 Wildcards in directory names multiple searches 4.9 Recursive file sweeps/directory traversals 4.10 Log files written by cfengine 4.11 Quoted strings 4.12 Regular expressions 4.13 Iterating over lists
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The idea of classes is central to the operation of cfengine. Saying
that cfengine is `class orientated' means that it doesn't make decisions
using if...then...else constructions the way other
languages do, but only carries out an action if the host running the
program is in the same class as the action itself. To understand what
this means, imagine sorting through a list of all the hosts at your
site. Imagine also that you are looking for the class of hosts
which belong to the computing department, which run GNU/Linux operating
system and which have yellow spots! To figure out whether a particular
host satisfies all of these criteria you first delete all of the hosts
which are not GNU/Linux, then you delete all of the remaining ones which
don't belong to the computing department, then you delete all the
remaining ones which don't have yellow spots. If you are on the
remaining list, then you are in the class of all
computer-science-Linux-yellow-spotted hosts and you can carry out the
action.
Cfengine works in this way, narrowing things down by asking if a host is in several classes at the same time. Although some information (like the kind of operating system you are running) can be obtained directly, clearly, to make this work we need to have lists of which hosts belong to the computer department and which ones have yellow spots.
So how does this work in a cfengine program? A program or configuration script consists of a set of declarations for what we refer to as actions which are to be carried out only for certain classes of host. Any host can execute a particular program, but only certain action are extracted -- namely those which refer to that particular host. This happens automatically because cfengine builds up a list of the classes to which it belongs as it goes along, so it avoids having to make many decisions over and over again.
By defining classes which classify the hosts on your network in some easy to understand way, you can make a single action apply to many hosts in one go -- i.e. just the hosts you need. You can make generic rules for specific type of operating system, you can group together clusters of workstations according to who will be using them and you can paint yellow spots on them -- what ever works for you.
A cfengine action looks like this:
action-type:
compound-class::
declaration
|
A single class can be one of several things:
ultrix, sun4 etc.
This is referred to henceforth as a hard class.
Monday Tuesday Wednesday..).
Hr00, Hr01 ... Hr23).
Min00, Min17 ... Min45).
Min00_05, Min05_10 ... Min55_00)
Day1 ... Day31).
January, February, ... December).
Yr1997, Yr2001).
A compound class is a sequence of simple classes connected by dots or `pipe' symbols (vertical bars). For example:
myclass.sun4.Monday:: sun4|ultrix|osf:: |
compound_class:: are only carried out if the host concerned is in
myclass, is of type sun4 and the day is Monday!
In the second example, the host parsing the file must be either of
type sun4 or ultrix or osf.
In other words, compound classes support two operators: AND and OR,
written `.' and `|' respectively. Cfengine doesn't
care how many of these operators you use (since it skips over blank
class names), so you could write either
solaris|irix:: |
or
solaris||irix:: |
depending on your taste. On the other hand, the order in which cfengine evaluates AND and OR operations does matter, and the rule is that AND takes priority over OR, so that `.' binds classes together tightly and all AND operations are evaluated before ORing the final results together. This is the usual behaviour in programming languages. You can use round parentheses in cfengine classes to override these preferences.
Cfengine allows you to define switch on and off dummy classes so that
you can use them to select certain subsets of action. In particular,
note that by defining your own classes, using them to make compound
rules of this type, and then switching them on and off, you can also
switch on and off the corresponding actions in a controlled way. The
command line options -D and -N can be used for this
purpose. See also addclasses in the Reference manual.
A logical NOT operator has been added to allow you to exclude
certain specific hosts in a more flexible way. The logical NOT
operator is (as in C and C++) `!'. For instance, the
following example would allow all hosts except for myhost:
action:
!myhost::
command
|
and similarly, so allow all hosts in a user-defined group mygroup,
except for myhost, you would write
action:
mygroup.!myhost::
command
|
which reads `mygroup AND NOT myhost'. The NOT operator can also be combined with OR. For instance
class1|!class2 |
would select hosts which were either in class 1, or those which were not in class 2.
Finally, there is a number of reserved classes. The following are hard classes for various operating system architectures. They do not need to be defined because each host knows what operating system it is running. Thus the appropriate one of these will always be defined on each host. Similarly the day of the week is clearly not open to definition, unless you are running cfengine from outer space. The reserved classes are:
ultrix, sun4, sun3, hpux, hpux10, aix, solaris, osf, irix4, irix, irix64
sco, freebsd, netbsd, openbsd, bsd4_3, newsos, solarisx86, aos,
nextstep, bsdos, linux, debian, cray, unix_sv, GnU, NT
|
If these classes are not sufficient to distinguish the hosts on your network, cfengine provides more specific classes which contain the name and release of the operating system. To find out what these look like for your systems you can run cfengine in `parse-only-verbose' mode:
cfengine -p -v |
sunos_5_4 and sunos_sun4m,
sunos_sun4m_5_4.
Cfengine uses both the unqualified and fully host names as classes. Some
sites and operating systems use fully qualified names for their
hosts. i.e. uname -n returns to full domain qualified
hostname. This spoils the class matching algorithms for cfengine, so
cfengine automatically truncates names which contain a dot `.' at the
first `.' it encounters. If your hostnames contain dots (which do not
refer to a domain name, then cfengine will be confused. The moral is:
don't have dots in your host names! NOTE: in order to ensure that
the fully qualified name of the host becomes a class you must define the
domain variable. The dots in this string will be replaced by underscores.
In summary, the operator ordering in cfengine classes is as follows:
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
When you are building up a configuration file it is very useful to be able to use variables. If you can define your configuration in terms of some key variables, it can be changed more easily later, it is more transparent to the reader of the program and you can also choose to define the variables differently on different types of system. Another way of saying this is that cfengine variables also belong to classes. Cfengine makes use of variables in three ways.
Environment variables are fetched directly from the shell on whatever
system is running the program. An example of a special variable is the
domain variable from the previous section. Straightforward macro
substitution allows you to define a symbol name to be replaced by an
arbitrary text string. All these definitions (apart from shell
environment variables, of course) are made in the control part of the
cfengine program:
control: myvar = ( /usr/local/mydir/lib/very/long/path ) # define macro ... links: $(myvar) -> /another/directory |
Here we define a macro called myvar, which is later used to
define the creation of a link. As promised we can also define
class-dependent variables:
control: sun4:: myvar = ( sun ) hpux:: myvar = ( HP ) |
Cfengine gives you access to the shell environment variables and allows you to define variables of your own. It also keeps a few special variables which affect the way in which cfengine works. When cfengine expands a variable it looks first at the name in its list of special variables, then in the list of user-defined macros and finally in the shell environment for a match. If none of these are found it expands to the empty string. If you nest macros,
control: myvar = ( "$(othervar)" ) |
You can also import values from the execution of a shell command
by prefixing a command with the word exec.
control: listing = ( "exec /bin/ls" ) |
This sets the variable `listing' to the output of the command in the quotes.
Variables are referred to in either of two different ways, depending on
your taste. You can use the forms $(variable) or
${variable}. The variable in braces or parentheses can be the
name of any user defined macro, environment variable or one of the
following special internal variables.
AllClasses
arch
binserver
class
sun4, hpux).
Non-definable.
date
domain
faculty
fqhost
host
ipaddress
MaxCfengines
ostype
$(arch).
OutputPrefix
OutputPrefix = ( "cfengine:$(host):") |
RepChar
site
$(faculty) and may be used interchangeably.
split
sysadm
timezone
control.
UnderscoreClasses
year
These variables are kept special because they play a special role in setting up a system configuration. See section 5. Designing a global system configuration. You are encouraged to use them to define fully generalized rules in your programs. Variables can be used to advantage in defining filenames, directory names and in passing arguments to shell commands. The judicious use of variables can reduce many definitions to a single one if you plan carefully.
NOTE: the above control variables are not case sensitive, unlike user macros, so you should not define your own macros with these names.
The following variables are also reserved and may be used to produce troublesome special characters in strings.
cr
dblquote
"
dollar
lf
n
quote
'.
spc
tab
You can use variables in the following places:
$(binserver) variable is not always appropriate in this context. For instance
links:
osf::
/$(site)/${host}/directory -> somefile
|
shellcommands in the Reference manual).
shellcommands: any:: "/bin/echo $(timezone) | /bin/mail $(sysadm)" '/bin/echo "double quotes!"' |
The latter possibility enables cfengine's variables to be passed on to user-defined scripts.
option=$(variable).
Variables can be defined differently under different classes by preceding the definition with a class name. For example:
control: sun4:: my_macro = ( User_string_1 ) irix:: my_macro = ( User_string_2 ) |
$(my_macro) depends on which of the
classes evaluates to true. This feature can be used to good effect to
define the mail address of a suitable system administrator for different
groups of host.
control: physics:: sysadm = ( mark,fred ) chemistry:: sysadm = ( localsys@domain ) |
Note, incidentally, that the `-a' option can be used to print out the mail address of the system administrator for any wrapper scripts.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Note that macro-variables which are undefined are not expanded as of version 1.6 of cfengine. In earlier versions, undefined variables would be replaced by an empty string, as in Perl. In versions 1.6.x and later, the variable string remains un-substituted, if the varaiable does not exist. For instance,
control: actionsequence = ( shellcommands ) myvar = ( "test string " ) shellcommands: "/bin/echo $(myvar) $(myvar2)" |
cfengine:host: Executing script /bin/echo test string $(myvar2)
cfengine:host:/bin/echo test : sh: syntax error at line 1: `(' unexpected
cfengine:host: Finished script /bin/echo test string $(myvar2)
|
This allows variables to be defined on-the-fly by modules.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine communicates with itself by passing messages in the form of classes. When a class becomes switched on or off, cfengine's program effectively becomes modified. There are several ways in which you can switch on and off classes. Learning these fully will take some time, and only then will you harness the full power of cfengine.
Because cfengine works at a very high level, doing very many things for very few lines of code it might seem that some flexibility is lost. When we restrict certain actions to special classes it is occasionally useful to be able to switch off classes temporarily so as to cancel the special actions.
4.4.1 Command line classes 4.4.2 actionsequence classes 4.4.3 shellcommand classes 4.4.4 Feedback classes 4.4.5 Writing plugin modules
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
You can define classes of your own which can be switched on and off,
either on the command line or from the action sequence. For example,
suppose we define a class include. We use addclasses to
do this.
addclasses = ( include othersymbols ) |
The purpose of this would be to allow certain `excludable actions' to be defined. Actions defined by
any.include::
actions
|
include to
be true using addclasses. But if cfengine is run in a restricted
mode, in which include is set to false, we can exclude these
actions.
So, by defining the symbol include to be false, you can exclude
all of the actions which have include as a member. There are two
ways in which this can be done, one is to negate a class globally using
cfengine -N include |
This undefines the class include for the entire duration of the
program.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Another way to specify actions is to use a class to select only a subset of all the actions defined in the actionsequence. You do this by adding a class name to one on the actions in action sequence by using a dot `.' to separate the words. In this case the symbol only evaluates to `true' for the duration of the action to which it attached. Here is an example:
links.onlysome shellcommands.othersymbols.onlysome |
onlysome is defined to be true while
this instance of links is executed. That means that only actions
labelled with the class onlysome will be executed as a result of
that statement. In the latter case, both onlysome and
othersymbols are defined to be true for the duration of
shellcommands.
This syntax would normally be used to omit certain time-consuming actions, such as tidying all home directories. Or perhaps to synchronize certain actions which have to happen in a certain order.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
For more advanced uses of cfengine you might want to be able to define a class on the basis of the success or failure of a user-program, a shell command or user script. Consider the following example
groups:
have_cc = ( "/bin/test -f /usr/ucb/cc"
"/bin/test -f /local/gnu/cc" )
|
classes as an alias for groups. Whenever cfengine meets
an object in a class list or variable, which is surrounded by either
single, double quotes or reversed quotes, it attempts to execute the
string as a command passed to the Bourne shell. If the resulting command
has return code zero (proper exit) then the class on the left hand side
of the assignment (in this case `have_cc') will be true. If the
command returns any other value (an error number) the result is
false. Since groups are the logical OR of their members (it is
sufficient that one of the members matches the current system), the
class `have_cc' will be defined above if either `/usr/ucb/cc'
or `/local/gnu/cc' exist, or both.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Classes may be defined as the result of actions being carried out by cfengine. For example, if a file gets copied, needs to be edited or if diskspace falls under a certain threshhold, cfengine can be made to respond by activating classes at runtime. This allows you to create dynamically responsive programs which react to the changing environment. These classes are defined as part of other statements with clauses of the form
define=classlist |
Classes like these should generally be declared at the start of a program
unless the define statements always precede the actions which
use the defined classes, with addinstallable.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
If the regular mechanisms for setting classes do not produce the results you require for your configuration, you can write your own routines to concoct the classes of your dreams. Plugin modules are added to cfengine programs from within the actionsequence, (see Reference manual). They allow you to write special code for answering questions which are too complex to answer using the other mechanisms above. This allows you to control classes which will be switched on and the moment at which your module attempts to evaluate the condition of the system.
Modules must lie in a special directory defined by the variable
moduledirectory.
They must have a name of the form `module:mymodule' and they
must follow a simple protocol. Cfengine will only execute a module which
is owned either by root or the user who is running cfengine, if it lies
in the special directory and has the special name. A plug-in module may
be written in any language, it can return any output you like, but lines
which begin with a `+' sign are treated as classes to be defined
(like `-D'), while lines which begin with a `-' sign are
treated as classes to be undefined (like `-N'). Lines starting
with `=' are variables/macros to be defined. Any other lines of
output are cited by cfengine, so you should normally make your module
completely silent. Here is an example module written in perl. First we
define the module in the cfengine program:
control:
moduledirectory = ( /local/cfengine/modules )
actionsequence = (
files
module:myplugin.specialclass
"module:argplugin.specialclass arg1 arg2"
copy
)
...
|
AddInstallables, if this is more convenient. NOTE: you must
declare the classes before using them in the cfengine configuration, or else
those actions will be ignored.
Next we write the plugin itself.
#!/usr/bin/perl
#
# module:myplugin
#
# lots of computation....
if (special-condition)
{
print "+specialclass";
}
|
Modules inherit the environment variables from cfengine and accept arguments, just as a regular shellcommand does.
#!/bin/sh # # module:myplugin # /bin/echo $* |
#!/usr/bin/perl
print "Decoding $ENV{CFALLCLASSES}\n";
@allclasses = split (":","$ENV{CFALLCLASSES}");
while ($c=shift(@allclasses))
{
$classes{$c} = 1;
print "$c is set\n";
}
|
Modules can define macros in cfengine by outputting strings of the form
=variablename=value |
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
any
The generic wildcard any may be used to stand for any class.
Thus instead of assigning actions for the class sun4 only you
might define actions for any architecture by specifying:
any::
actions
|
If you don't specify any class at all then cfengine assumes a default
value of any for the class.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
A useful trick when debugging is to eliminate unwanted actions by changing their class name. Since cfengine assumes that any class it does not understand is the name of some host, it will simply ignore entries it does not recognize. For example:
myclass:: |
can be changed to
Xmyclass:: |
Since Xmyclass no longer matches any defined classes, and is not
the name of any host it will simply be ignored. The -N option
can also be used to the same effect. (see Reference manual).
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
It is sometimes convenient to be able to restrict the access of a
program to a handful of users. This can be done by adding an access
list to the control: section of your program. For example,
control:
...
access = ( mark root )
|
would cause cfengine to refuse to run the program for any other users except mark and root. Such a restriction would be useful, for instance, if you intended to make set-user-id scripts but only wished certain users to be able to run them. If the access list is absent, all users can execute the program.
Note: if you are running cfengine via the cfrun program
then cfengine is always started with the same user identity as
the cfservd process on the remote host.
Normally this is the root user identity. This means that
the access keyword will have no effect on the use of
the command cfrun.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
In the two actions files and tidy you define directory
names at which file checking or tidying searches should start. One
economical feature is that you can define a whole group of directories
at which identical searches should start in one fell swoop by making use
of wildcards. For example, the directory names
/usr/*/*
/bla/*/ab?/bla
|
The symbol `?' matches any single character, whereas `*' matches any number of characters, in accordance with shell file-substitution wildcards.
When this notation is used in directory names, it always defines the
starting point for a search. It does not tell the command how to
search, only where to begin. The pattern directive in
tidy can be used to specify patterns when tidying files and under
files all files are considered, (see Reference manual),
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
File sweeps are searches through a directory tree in which many files are examined and considered for processing in some way. There are many instances where one uses cfengine to perform a file sweep.
files action, for checking access rights and ownership
of files.
tidy action, for checking files for deletion.
copy action, while recursively checking whether to
copy a file tree.
editfiles action, while recursively checking whether to
edit the files in a tree of files.
ignore.
tidy does not allow ignore,include and exclude. It is documented
in the section on tidying, (see Reference manual).
Items declared under the global ignore section affect files,
copy, links and tidy. For file sweeps within files, copy and links, you
may provide private ignore lists using ignore=. The difference between
exclude and ignore is that ignore can deal with absolute directories. It prunes
directories, while exclude only looks at the files within directories.
For file sweeps within files and copy you can specify
specific search parameters using the keywords include=
and exclude= and as of version 1.6.x filter=.
For example,
files: /usr/local/bin m=0755 exclude=*.ps action=fixall |
Specifying the include= keyword is slightly different since it
automatically restricts the search to only named patterns (using *
and ? wildcards), whenever
you have one or more instances of it. If you include patterns in this
way, cfengine ignores any files which do not match the given patterns.
It also ignores any patterns which you have specified in the global
ignore-list as well as patterns excluded with exclude=pattern.
In other words, exclusions always override inclusions.
If you exclude a pattern or a directory and wish to treat it in some special way, you need to code an explicit check for that pattern as a separate entity. For example, to handle the exluded `.ps' files above, you would need to code something like this:
files: /usr/local/bin m=0644 include=*.ps action=fixall |
Note: don't be tempted to enclose your wildcards in quotes. The quotes will be treated literally and the pattern might not match the way you would expect.
For editfiles the syntax is somewhat different. Here one needs to add
lines to the edit stanza:
editfiles:
{ /tmp/testdir
Include .*
Exclude bla.*
Ignore "."
Ignore ".."
Recurse 6
ReplaceAll "search" With "replace"
}
|
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine keeps two kinds of log-file privately and it allows you to log
its activity to syslog. Syslog logging may be switched on with the
Syslog variable, (see Reference manual).
The first log cfengine keeps is for every user
(every subdirectory of a home directory filesystem). A file
~/.cfengine.rm keeps a list of all the files which were deleted
during the last pass of the tidy function. This is useful for
users who want to know files have been removed without their blessing.
This helps to identify what is happening on the system in case of
accidents.
Another file is built when cfengine searches through file trees in the
files action. This is a list of all programs which are setuid
root, or setgid root. Since such files are a potential security risk,
cfengine always prints a warning when it encounters a new one (one which
is not already in its list). This allows the system administrator to
keep a watchful eye over new programs which appear and give users root
access. The cfengine log is called /etc/cfengine/cfengine.log. The file
is not readable for general users.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
In several cfengine commands, you use quoted strings to define a quantity of text which may contain spaces. For example
control:
macro = ( "mycommand" )
editfiles:
{ $(HOME)/myfile
AppendIfNoSuchLine 'This text contains space'
}
|
In each case you may use any one of the three types of quote marks in order to delimit strings,
' or " or ` |
If you choose, say ", then you may not use this symbol within the
string itself. The same goes for the other types of string delimiters.
Unlike the shell, cfengine treats these three delimiters in precisely
the same way. There is no difference between them.
If you need to quote a quoted string, then you should choose a delimiter
which does not conflict with the substring.
Note that you can use special variables for certain symbols in a string See section 4.2 Variable substitution.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Regular expressions can be used in cfengine in connection with
editfiles and processes to search for lines matching
certain expressions. A regular expression is a generalized wildcard. In
cfengine wildcards, you can use the characters '*' and '?' to match any
character or number of characters. Regular expressions are more
complicated than wildcards, but have far more flexibility.
NOTE: the special characters `*' and `?' used in wildcards do not have the same meanings as regular expressions!.
Some regular expressions match only a single string. For example, every string which contains no special characters is a regular expression which matches only a string identical to itself. Thus the regular expression `cfengine' would match only the string "cfengine", not "Cfengine" or "cfengin" etc. Other regular expressions could match more general strings. For instance, the regular expression `c*' matches any number of c's (including none). Thus this expression would match the empty string, "c", "cccc", "ccccccccc", but not "cccx".
Here is a list of regular expression special characters and operators.
[\] or quoted with a backslash itself `\\'.
alnum
alpha
blank
cntrl
digit
graph
lower
print
punct
space
upper
xdigit
Here is a few examples. Remember that some commands look for a regular expression match of part of a string, while others require a match of the entire string (see Reference manual).
^# match string beginning with the # symbol
^[^#] match string not beginning with the # symbol
^[A-Z].+ match a string beginning with an uppercase letter
followed by at least one other character
|
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Shell list variables are normally defined by joining together a list of directories using a concatenation character such as `:'. A typical example of this is the PATH variable:
PATH=/usr/bin:/usr/local/bin:/usr/sbin |
It is convenient to be able to use such variables to force cfengine to iterative over a list. This gives us a compact way of writing repeated operations and it allows a simple method of communication with the shell environment. For security reasons, iteration is supported only in the following contexts:
This typically allows communication with PATH-like environment variables in the shell.
In these contexts, any variable which has the form of
a list joined together by colons will be iterated over
at compilation time. Note that you can change the value
of the list separator using the split variable
in the control section of the program (see Reference manual).
For example, to link all of the binary files in the PATH environment variable to a single directory, tidying dead links in the process, you would write
control: actionsequence = ( links tidy ) links: /allbin +> $(PATH) tidy: # Hopefully no-match matches nothing /allbin pattern=no-match age=0 links=tidy |
no-match is not a reserved word in cfengine, this is just a string you do not expect to match any file.
Alternatively, you might want to define an internal list using a space as a separator:
control: split = ( " " ) mylist = ( "mark ricky bad-dude" ) tidy: /mnt/home1/$(mylist) pattern=*.cfsaved age=1 |
This example iterates the tidy action over the directories `/mnt/home1/mark', `/mnt/home1/ricky' and `/mnt/home1/bad-dude'.
The number of list variables in any path or filename should normally be restricted to one or two, since the haphazard combination of two lists will seldom lead to any meaningful pattern. The only obvious exception is perhaps to iterate over a common set of child-directories like `bin', `lib' etc in several different package directories.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
This chapter is about building strategies for putting together a site configuration for your entire network.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
In order to use any system administration tool successfully, you have to make peace with your system by deciding exactly what you expect and what you are willing to do to achieve the results. You need to decide what you will consider to be acceptable and what is to be considered completely untenable. You need to make these decisions because otherwise you will only be confused later when things don't go the way you expected.
Experience shows that the most successful policies for automation involve keeping everything as simple as possible. The more uniform or alike your machines are, the easier they are to run and the happier users are. Sometimes people claim that they need such great flexibility that all their machines should be different. This belief tends to be inversely proportional to the number of machines they run and generally only applies to very special development environments! Usually you will only need one or to machines to be special and most can be made very similar.
Site configuration is about sharing and controlling resources. The resources include disks (filespace), files, data, programs, passwords and physical machines. Before planning your sitewide configuration you should spend some time deciding how you would like things to work.
In the remaining parts of this chapter, you will find some hints and tips about how to proceed, but remember that when push comes to shove, you must make your own choices.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
If you use the network information service (NIS) on your local network
then you may already have defined netgroups consisting of lists
of hosts which belong to specific owners at your site. If you have,
then you can use these groups within cfengine. This means that you can
use the same groups in the /etc/exports file as you use to define
the mount groups and classes.
A netgroup is a list of hostnames or user names which are registered in the network information service (NIS) database under a specific name. In our case we shall only be interested in lists of hostnames.
To make a netgroup you need to define a list in the file
/etc/netgroup on your NIS server. If you are not the NIS
administrator, you will have to ask to have a netgroup installed. The
form of a netgroup list of hosts is:
mylist-name (host1,,) (host2,,) (host3,,) (host4,,) norway-sun4-host (saga,,) (tor,,) (odin,,) foes-linux-hosts (borg,,) |
The usefulness of netgroups is that they can be used to stand for a list of hostnames in system files like `/etc/exports'. This compresses the amount of text in this file from a long list to a single name. It also means that if you use the same list of hosts from a netgroup inside cfengine when defining groups and classes, you can be sure that you are always using the same list. In particular it means that you don't have to update multiple copies of a list of hosts.
The netgroups can now be used in cfengine programs by using the +
or @+ symbols in the groups section. (see Reference manual).
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
File and link management takes several forms.
Actions are divided into three categories called
files, tidy and links. The first of
these is used to check the existence of, the ownership
and permissions of files. The second concerns the systematic
deletion of garbage files. The third is a link manager
which tests, makes and destroys links. The monitoring
of file access bits and ownership can be set up for
individual files and for directory trees, with controlled
recursion. Files which do not meet the specified criteria
can be `fixed' --i.e. automatically set to the correct
permissions, or can simply be brought to the attention of
the system administrator by a warning.
The syntax of such a command is as follows:
files:
class::
/path mode=mode owner=owner group=group
recurse=no-of-levels action=action
|
The directory or file name is the point at which cfengine
begins looking for files. From this point the search for files
proceeds recursively into subdirectories with a maximum limit set by
the recurse directive, and various options for dealing with
symbolic links and device boundaries. The mode-string defines the
allowed file-mode (by analogy with `chmod') and the owner and group
may specify lists of acceptable user-ids and group-ids. The action
taken in response to a file which does not meet acceptable criteria is
specified in the action directive. It includes warning about or
directly fixing all files, or plain files or directories only. Safe
defaults exist for these directives so that in practice they may be
treated as options.
For example,
files:
any::
/usr/*/bin mode=a+rx,o-w own=root r=inf act=fixall
|
which (in abbreviated form) would check recursively all files and
directories starting from directories matching the wildcard
(e.g. `/usr/local/bin', `/usr/ucb/bin'). By default, fixall
causes the permissions and ownership of the files to be fixed without
further warning.
One problem with symbolic links is that the files they point to can
get deleted leaving a `hanging pointer'. Since cfengine can make
many hundreds of links without any effort, there is the danger that, in time,
the system could become full of links which don't point anywhere. To
combat this problem, you can set the option links=tidy in the files
section. If this is set, cfengine will remove any symbolic links which
do not point to existing files (see Reference manual).
The creation of symbolic links is illustrated in figure 1 and the checking algorithm was discussed in section 2. In addition to the creation of single links, one may also specify the creation of multiple links with a single command. The command
links:
binaryhost::
/local/elm/bin +> /local/bin
|
links all of the files in `/local/elm/bin' to corresponding files in `/local/bin'. This provides, amongst other things, one simple way of installing software packages in regular `bin' directories without controlling users' PATH variable. A further facility makes use of cfengine's knowledge of available (mounted) binary resources to search for matches to specific links. Readers are referred to the full documentation concerning this feature.
The need to tidy junk files has become increasingly evident during the history of cfengine. Files build up quickly in areas like `/tmp', `/var/tmp'. Many users use these areas for receiving large ftp-files so that their disk usage will not be noticed! To give another example, just in the last few months the arrival of netscape World Wide Web client, with its caching facilities, has flooded hard-disks at Oslo with hundreds of megabytes of WWW files. In addition the regular appearance of `core' files(1) and compilation by-products (`.o' files and `.log' files etc.) fills disks with large files which many users do not understand. The problem is easily remedied by a few lines in the cfengine configuration. Files can be deleted if they have not been accessed for n-days. Recursive searches are both possible and highly practical here. In following example:
tidy:
AllHomeServers::
home pattern=core r=inf age=0
home/.wastebasket pattern=* r=inf age=14
home/.netscape-cache pattern=cache????* r=inf age=2
home/.MCOM-cache pattern=cache????* r=inf age=2
home/.netscape pattern=cache????* r=inf age=2
|
all hosts in the group `AllHomeServers' are instructed to
iterate over all users' home directories (using the wildcard
home) and look for files matching special patterns.
Cfengine tests the access time of files and deletes
only files older than the specified limits. Hence all core
files, in this example, are deleted immediately, whereas files in the
subdirectory `.wastebasket' are deleted
only after they have lain there untouched for 14 days, and so on.
As a system administrator you should, of course, exercise great caution when making rules which can delete users' files. A single slip of the hand can result in a rule which will irretrievably delete files.
When making a `tidy' strategy you should probably coordinate with your backup policy. You should not delete files until after you have taken a backup, so that -- if the worst should happen -- you are covered against possible accidents.
Cfengine helps to some extent to keep track of what files it deletes.
When tidying users' home directories it creates a log file of all files
which were deleted on the last tidy operation. This log is called
~/.cfengine.rm.
You might consider tidying certain files only once a week, in which case a command such as
tidy:
AllHomeServers.Sunday::
files to tidy
|
NOTE! Be careful when telling cfengine to delete core files. If
you write a wildcard like core*, then you could risk deleting
important system files such as core.h.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The administration of a system often requires the copying of files. The reason for this is usually that we would like to distribute a copy of a particular file, from some master location and ensure that all of the copies are up to date. Another use for this is to install software from one directory (perhaps on a CD ROM) to another.
Cfengine helps this process by allowing you to copy a single file or a file tree, from one directory to another, perhaps checking the permissions and owners of a file to adjust the copies in some special way. The files are checked by cfengine using one of two methods.
Cfengine allows you to do the following
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine allows you to check for the existence of processes on your system, send those processes signals (such as kill) and perhaps restart those processes. Typical applications for this are sending `cron' and `inetd' the HUP signal, after editing their configuration files, or killing unwanted processes (such as user programs which hog the system at peak usage times).
You can read more about this in the reference section .
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Most of the filesystems that you will want to make available across the network are going to fall into one of two categories. In cfengine parlance these are called home directories and binary directories. A home directory is a place where users' login directories are kept. This is traditionally a directory called `/home' or `/users' or some subdirectory of these. A binary directory is a place where compiled software is kept. Such files (which do not belong to the pure operating system release) are often placed in a directory called `/usr/local' or simply `/local'.
In this chapter we shall consider a scheme for using cfengine to make NFS filesystem management quite painless.
5.6.1 NFS filesystem resources a conceptual introduction 5.6.2 Unique filesystem mountpoints avoiding collisions 5.6.3 How does it work? 5.6.4 Special variables binserver etc. 5.6.5 Example programs for mounting resources example program
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Using the Network File System (NFS) in a large workstation environment requires a bit of planning. The idea of NFS is to share files on one host with other hosts. In most cases, filesystems to be shared across the network fall into two categories: binary filesystems (those which contain compiled software) and user or home filesystems (which contain users' login areas).
The most simple minded way to share resources would be to mount every resource (each available NFS filesystem) onto every host. To avoid collisions, each filesystem would have to have a unique name. This is one possibility, but not a very intelligent one. As experienced users will realize, cross-mounting too many NFS filesystems is a recipe for all kinds of trouble.
Cfengine offers a simple model which can help you pick out only the
resources you need from the list of NFS filesystems. It will then mount
them automatically and edit the appropriate filesystem tables. It does
this by defining classes of hosts. For instance -- you really don't
need to mount a binary filesystem for an ultrix system onto an
HPUX system. There would be no point -- binary resources are
architecture or hard-class dependent. But home directories
are architecture independent.
Cfengine lets you to define a list of allowed servers for various hosts so that only filesystems from the servers will be considered for mounting!
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The first step towards treating NFS filesystems as network resources is
to invent a naming scheme so that every filesystem has a unique name on
which it can be mounted. If we don't sort this out now, we could find
two or more hosts with a filesystem called /usr/local, both of
which we might like to mount since they contain different software.
A simple but extremely useful naming scheme is the following. (2) If you don't like this scheme you can invent your own, but the remainder of the text will encourage you to use this one. If you follow this scheme, exactly as described here, you will never have any problems with mount points. We shall describe the scheme in detail below. Here are some points to digest:
Each filesystem is given a directory name composed of three parts:
/site/host/contents |
/physics/einstein/local # /usr/local for einstein@physics /physics/newton/u1 # user partition 1 for newton@physics |
/usr/local than call the filesystem
/usr/local directly. This is because it makes the procedure of
organizing the entire network much clearer.
It is worth noting that, when you ask cfengine to mount such a resource,
it will automatically make the mount directory and can easily be asked
to make a link to /usr/local, so this small amount of extra work
is really no work at all.
The whole naming convention is compactly summarized by defining a mount
point variable, mountpattern. With the present scheme, this can
be defined as
mountpattern = ( /$(site)/$(host) ) |
homepattern pattern variable, which is used to distinguish
between home directories and binary resources. (See homepattern
in the reference section). You can think of this as being part of the
naming convention. In this text, we use the convention u1 u2
u3... for home disks. You could equally well use home1 home2...
etc. As long as the name is unique, it doesn't matter.
The full list of named resources should now be listed in the
mountables list, which is simply a list of all the resources
available for mounting on the network.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Once you have defined your unique names, how does cfengine know what to mount? The idea is now to define a list of servers for each class of hosts.
Suppose we make a binserver declaration:
binservers:
mygroup.sun4::
einstein
newton
|
This would tell cfengine that it should mount all binary resources from
hosts einstein or newton onto any host of type sun4
in the group mygroup. Every filesystem which is listed in
mountables and is not a home directory will be mounted.
Home directories and binary resources are kept separate automatically by
cfengine, because a home directory is one whose contents-name matches
the homepattern pattern variable. See section 5.6.2 Unique filesystem mountpoints.
A homeserver declaration:
homeservers:
mygroup::
einstein
newton
schwinger
feynman
|
would correspondingly mean mount all the home directory resources on the
hosts in the list on all hosts in the group mygroup. Clearly it
is unnecessary to distinguish between the architecture platform types of
the actual servers for user directories.
In each case, cfengine will mount filesystems, make the appropriate directories for the mount point and edit the filesystem table.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Once you have mounted a resource on a unique directory, you have access
to all of the relevant filesystems on your network -- but you really
wanted the `local' filesystem to be mounted on /usr/local. All
you need do now is to make a link:
links:
any::
/usr/local -> /$(site)/$(binserver)/local
|
The meaning of this is that, on any host, the directory
/usr/local should be a link to the `nearest' binary server's
`local' resource. The $(binserver) variable can in principle
expand to any binary server in the list. In practice, cfengine goes
through the list in order and picks the first filesystem resource which
matches.
Could this lead to a collision? Suppose we are on the host `einstein'
and we execute the above command. The host `einstein' has a filesystem
/physics/einstein/local on its local disk -- it is in fact the
binary server for the network, so it certainly doesn't need to mount any
NFS filesystems. But this is no problem because cfengine automatically
treats $(host) as the highest priority binary server for any
host. That means that if you have a local filesystem, it will always
have priority.
In contrast, if the host `schwinger' ran the command above, it would
find no local filesystem called /physics/schwinger/local, so it
would go along the list of defined binary servers, find `einstein' and
try again. It will succeed in finding `einstein' provided all the
binary servers were mounted before the link command is executed. This
means that you should structure the actionsequence so that all
filesystems are mounted before any links are made.
With a little practice, the cfengine model can lead to an enormous simplification of the issue of NFS-mountable resources.
NOTE: cfengine does not try to export filesystems, only mount already
exported filesystems. If you want to automate this procedure also, you
can use the editfiles facility to add entries to
`/etc/exports' (see editfiles in the Reference manual). In practice this is very
difficult to do and perhaps not desirable.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Let's write a very simple configuration for a network with only one server called hal, where all the hosts are of the same operating system type. In such an example we can avoid using classes altogether.
control:
site = ( univ )
domain = ( univ.edu )
actionsequence =
(
mountall
mountinfo
addmounts
mountall
links
)
binservers:
hal
homeservers:
hal
mailserver:
hal:/var/spool/mail
mountables:
hal:/univ/home1
hal:/univ/home2
hal:/univ/local
links:
/usr/local -> /univ/local
|
In this example, we have only one type of host so the configuration is the same for each of them: no class references are required. If we look through the action sequence we see that the program first mounts all the filesystems which are already defined on each host. It does this to be sure that everything which is already set up to be mounted is mounted. Let's assume that there are no problems with this.
The next thing that happens is that mountinfo builds a list of
the filesystems which each host has successfully mounted. Then by
calling addmounts we ask cfengine to check whether the host is
missing any filesystems. What happens is that cfengine first looks to
see what servers are defined for each host. In this case all hosts on
the network have only one server: hal. Hal is defined as a server for
both binary data and `home' data -- i.e. users' home directories. The
list mountables tells cfengine what filesystems are available
over the network for the server hal. There are three filesystems which
can be mounted, called `/univ/home1', `/univ/home2' and
`/univ/local'. Cfengine checks to see whether each of these
filesystems is mounted and, if not, it builds the necessary directories,
edits the necessary files and mounts the filesystems.
Finally we come to links in the action sequence. This tells
cfengine to look at the defined links. There is one link defined: a
link from `/usr/local' to the mounted filesystem
`/univ/local'. Cfengine checks and tries to make the link if
necessary. If all goes well, each host on the network should now have
at least three filesystems mounted and a link from `/usr/local' to
`/univ/local'.
Here is another simple example program for checking and automatically
mounting an NFS based /usr/local and all home directories onto
all hosts on a small network. Here we have several servers and must
therefore use some classes.
#
# Mounts
#
control:
site = ( mysite )
domain = ( mysite.country )
sysadm = ( mark )
netmask = ( 255.255.255.0 )
actionsequence =
(
mountall
mountinfo
addmounts
mountall
links
)
mountpattern = ( /$(site)/$(host) )
homepattern = ( u? ) # u1 u2 u3 etc..
groups:
MyGroup =
(
host1
host2
binserver1
binserver2
)
######################################################################
homeservers:
MyGroup:: host1
binservers:
MyGroup.sun4:: server1
MyGroup.ultrix:: server2
mailserver:
host1:/usr/spool/mail
mountables:
host1:/mysite/host1/u1
host1:/mysite/host1/u2
server1:/mysite/server1/local
server2:/mysite/server2/local
##########################################################################
links:
/usr/local -> /${site}/${binserver}/local
|
Let's suppose we run this program on host2 which is an ultrix machine.
This host belongs to the class mygroup and the hard-class
ultrix. This tells us that its homeserver is host1, its binary
server is server2 and its mailserver is host1. Moreover, since the
homepattern matches any filesystem ending in u-something, it recognizes
the two home directories in the mountables list -- and therefore the
two binary directories also.
The action sequence starts by mounting all of the filesystems currently in the filesystem table `/etc/fstab'. It then scans the list of mounted filesystems to find out what is actually mounted. Since the homeserver is host1, we know that our host has to mount all home-filesystems from this server, so it checks for `host1:/mysite/host1/u1' and `host1:/mysite/host1/u2'. If they are not present they are added to `/etc/fstab'(3). Next, we know that the binary server is server1, so we should check for `server1:/mysite/server1/local'. The mail server is also checked for and added if necessary. Cfengine then tries to mount all filesystems once again, so that the new filesystems should be added.
Note that, in the process of adding the filesystems to `/etc/fstab', cfengine creates the directories up to and including the point at which the filesystems should be mounted. If something prevents this -- if we try to mount on top of a plain file for instance --- then this will result in an error.
Finally, we reach the link section and we try to expand the variables.
$(site) expands to `mysite'. $(binserver) expands
first to the hostname (host2), but `/mysite/host2/local' does not
exist, so it then goes to the binserver list, which substitutes server1
for the value of $(binserver). Since
`/mysite/server1/local' does exist and is now mounted, cfengine
makes a link to this directory from `/usr/local'. The script is
then completed.
If the script is run again, everything should now be in place so nothing happens. If for some reason it failed the first time, it will fail again. At any rate it will either do the job once and for all or signal an error which must be corrected by human intervention(4).
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The automounter is a daemon based service which replaces static mounting of NFS filesystems with a dynamical model. When the automounter is running, filesystems are mounted only when a user tries to access a file which resides on one of those filesystem. After a given period (usually five minutes) any filesystem which has not been accessed is unmounted. The advantage of this scenario is that hanging servers do not affect the behaviour of hosts which mount their filesystems, unless a specific file is being accessed. In both cases, filesystems must be exported in order to be mountable.
It is not the purpose of this section to explain the use of the automounter in detail, only to offer hints as to how cfengine can be used to simplify and rationalize automount configuration for the already initiated. Let us begin by comparing the behaviour of the automounter with the cfengine model for mounted filesystems.
The automounter is designed to be used together with a global configuration file, distributed by NIS (the network information service). As such, all hosts read the same configuration file. This makes it appear as though all hosts end up mounting every filesystem in the automount configuration database, but this is not so in practice because filesystems are only mounted if required. Thus a system which does not require a filesystem will not attempt to mount it. Moreover, the existence of a global configuration file does not affect which hosts have the right to mount certain filesystems (which is specified by exports or share on the relevant server), thus a request to mount a non-exported filesystem will result in an access denial. The automounter is configured locally on each host in files named `/etc/auto_master', `auto_direct' etc.
In the cfengine static mounting scheme, you define a list of binary and home servers. The filesystem table is modified on the basis of these decisions, and filesystems are only added if cfengine deems it appropriate to mount them on a given host. The idea here is to minimize the number of filesystems mounted to those which are known to be required. Again the issue of access permissions must be arranged separately. These filesystems are placed directly in `/etc/fstab', or the equivalent for your system.
>From cfengine, you can use the automounter instead of the static mount model by
addmounts, mountinfo, mountall
from the actionsequence, in the control part
of your cfengine program,
editfiles to edit the relevant configuration files
such as `/etc/auto_master', or `auto_direct' etc,
AutomountDirectResources command in editfiles
to dump the list of cfengine class-based list of mountables
into a file of your choice in the correct format for
autmount's direct maps,
processes to restart the automounter
(send the hangup signal hup), or perhaps stop and restart
the daemon by sending the term signal (you should never
send the kill signal).
files or tidy to
clean up stale links afterwards,
copy to distribute basic automount configuration
files to multiple systems.
The automounter was created to solve certain problems which cfengine now solves (in the author's opinion) better. For example, the use of the `hosts' map in the automounter mounts filesystems like `/usr/local' on different (uniquely named) mountpoints for each host in order to avoid name space collisions. Using cfengine and a unique naming scheme, you can achieve the same thing more cleanly, without all of the gratuitous linking and unlinking which the automounter performs by itself. Moreover, the idea of a unique name-space is better practice and more in keeping with new global filesystem ideas such as AFS and DFS. The only advantage of the automounter is that one avoids the annoying error messages from hung servers about "NFS server not responding". In that respect, it seems sensible to use only direct mounts and a unique name space.
Some systems advocate grouping all users' login (home) directories under a common directory called `/home' or `users'. The automounter goes through all manner of contortions to achieve this task. If you use a unique naming scheme like the one advocated here, this is a trivial task. You simply arrange to mount or automount all user directories, such as
/site/host/home1 /site/host/home2 ... |
and then link them as follows:
/home +> /site/host/home1 /home +> /site/host/home2 ... |
Finally, you should be aware that the automounter does not like to be mixed with static mount and unmount operations. Automounted filesystems take priority over statically mounted filesystems, but the automounter can be confused by manually mounting or unmounting filesystems while it is running.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
A very convenient characteristic of BSD/System 5 systems is that they are configured primarily by human-readable textfiles. This makes it easy for humans to configure the system and it also simplifies the automation of the procedure. Most configuration files are line-based text files, a fact which explains the popularity of, for example, the Perl programming language. Cfengine does not attempt to compete with Perl or its peers. Its internal editing functions operate at a higher level which are designed for transparency rather than flexibility. Fortunately most editing operations involve appending a few lines to a file, commenting out certain lines or deleting lines.
For example, some administrators consider the finger service to be a threat to security and want to disable it. This could be done as follows.
editfiles:
{ /etc/inetd.conf
HashCommentLinesContaining "finger"
}
|
Commands containing the word `Comment' are used to `comment out' certain lines from a text-file--i.e. render a line impotent without actually deleting it. Three types of comment were supported originally: shell style (hash) `#', `%' as used in TeX and on AIX systems, and C++-style `//'.
A more flexible way of commenting is also possible, using directives which first define strings which signify the start of a comment and the end of a comment. A single command can then be used to render a comment. The default values of the comment-start string is `# ' and the default comment-end string is the empty string. For instance, to define C style comments you could write:
{ file
SetCommentStart "/* "
SetCommentEnd " */"
# Comment out all lines containing printf!
CommentLinesMatching ".*printf.*"
}
|
Other applications for these editing commands include monitoring and controlling root-access to hosts by editing files such as `.rhosts' and setting up standard environment variables in global shell resource files-- for example, to set the timezone. You can use the editing feature to update and distribute the message of the day file, or to configure sendmail, (see FAQS and Tips in the Reference manual).
An extremely powerful feature of cfengine is the ability to
edit a similar file belonging to every user in the system. For example,
as a system administrator, you sometimes need to ensure that users
have a sensible login environment. Changes in the system might require
all users to define a new environment variable, for instance. This is
achieved with the home pseudo-wildcard. If one writes
{ home/.cshrc
AppendIfNoSuchLine "# Sys admin/cfengine: put next line here"
AppendIfNoSuchLine "setenv PRINTER newprinter"
}
|
Files are loaded into cfengine and edited in memory. They are only saved again if modifications to the file are carried out, in which case the old file is preserved by adding a suffix to the filename. When files are edited, cfengine generates a warning for the administrator's inspection so that the reason for the change can be investigated.
The behaviour of cfengine should not be confused with that of sed or perl. Some functionality is reproduced for convenience, but the specific functions have been chosen on the basis of (i) their readability and (ii) the fact that they are `frequently-required-functions'. A typical file editing session involves the following points:
Equivalent one-line sed operations involve editing the same file perhaps many times to achieve the same results--without the safety checks in addition.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The existence of certain files can compromise the integrity of your system and you may wish to ensure that they do not exist. For example, some manufacturers sell their workstations with a `+' symbol in the file `/etc/hosts.equiv'. This means that anyone in your NIS domain has password free access to the system!! Since this is probably not a good idea, you will want to disable this file by renaming it, or simply deleting it.
disable:
/etc/hosts.equiv
|
Other files compromise the system because they grow so large that they fill an entire disk partition. This is typically true of log files such as the system 5 files `/var/adm/wtmpx' and `/var/lp/logs/lpsched'. Other files like /var/adm/messages get "rotated" by the system so that they do not grow so large as to fill the disk. You can make cfengine rotate these files too, by writing
disable:
Sunday::
/var/lp/logs/lpsched rotate=3
|
Now, when cfengine is run, it renamed the file `lpsched' to
a file called `lpsched.1'. It also renames `lpsched.1'
as `lpsched.2' and so on, until a maximum of 3 files are
kept. After passing 3, the files `fall off the end' and
are deleted permanently. This procedure prevents any log files
from growing too large. If you are not interested in keeping
back-logs, then you may write rotate=empty and cfengine
will simply empty the log file.
When ever cfengine disables a file (disable or links with
the `!' operator), or saves a new file on top of an old one
(copy or editfiles), it makes a backup of the
original. Usually disabled files are renamed by appending the string
`.cfdisabled' the filename; copied files are saved by appending
the string `.cfsaved'.
It is possible to switch off backup file
generation in the copy feature by setting the variable
backup=false, but a better way of managing disabled and backed-up
files is to use a directory in which you collect all such files for the
whole system. This directory is called the file repository and is set in
the control part of the program, as follows:
control:
repository = ( directory-name )
|
If this variable is defined, cfengine collects all backup and disabled files (except for rotated files) in this directory, using a unique pathname. You can then inspect these files in the repository and arrange to tidy the repository for old files which are no longer interesting.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Above all, the aim of cfengine is to present a simple interface to system administrators. The actions which are built into the engine are aimed at solving the most pressing problems, not at solving every problem. In many cases administrators will still need to write scripts to carry out more specific tasks. These scripts can still be profitably run from cfengine. Variables and macros defined in cfengine can be passed to scripts so that scripts can make maximal advantage of the class based decisions. Also note that, since the days of the week are also classes in cfengine, it is straightforward to run weekly scripts from the cfengine environment (assuming that the configuration program is executed daily). An obvious use for this is to update databases, like the fast-find database one day of the week, or to run quota checks on disks.
shellcommands:
myhost.Sunday::
"/usr/bin/find/updatedb"
|
Cfengine scripts can be passed variables using normal variable substitution:
control: cfbin = ( /local/gnu/lib/cfengine/bin ) backupdir = ( /iu/dax/backup ) shellcommands: "$(cfbin)/cfbackup -p -f $(backupdir) -s /iu/nexus/u1" |
If you need to write a particularly complex script to expand cfengine's capabilities, it might be useful to have full access to the defined classes. You can do this in one of two ways:
$(allclasses) to the script. This contains a
list of all classes in the form of a string
CFALLCLASSES=class1:class2:...
|
This variable always contains an up to date list of the defined classes.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
In the previous two sections we have looked at how to rotate old log files and how to execute shell commands. If you keep a lot of old log files around on your system, you might want to compress them so that they don't take up so much space. You can do this with a shell command. The example below looks for files matching a shell wildcard. Names of the form `file.1', `file.2'...`file.10' will match this wildcard and the compression program sees that they get compressed. The output is dumped to avoid spurious messages.
shellcommands: "$(gnu)/gzip /var/log/*.[0-9] /var/log/*.[0-9][0-9] > /dev/null 2>&1" |
Cfengine will also recognize rotated files if they have been compressed, with suffixes `.Z', `.gz', `.rbz' or `.rbz'.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Access control lists are extended file permissions. They allow you to open or close a file to a named list of users (without having to create a special group for those users). They also allow you to open or close a file for a named list of groups. Several unix-like operating systems have had access control lists for some time; but they do not seem to have caught on.
There is a number of reasons for this dawdling in the past. The tools for setting ACLs are generally interactive and awkward to use. Because a named list of users would lead to excessive verbosity in an ls -l listing, one does not normally see them. There is therefore the danger that the hidden information would lead to undetected blunders in opening files to the wrong users. ACLs are also different on every vendor's filesystems and they don't work over intersystem NFS. In spite of these reservations, ACLs are a great idea. Here at Oslo College, it seems that users are continually asking how they can open a file just for the one or two persons they wish to collaborate with. They have grown used to Novell/PC networks which embraced the technology from Apollo/NCS much earlier. Previously the Unix answer to users has always been: go ask the system administrator to make a special group for you. Then do the `chmod' thing. And then they would say: so what's so great about this Unix then?
Addressing this lack of standardization has been the job of a POSIX draft committee. Some vendors have made their implementations in the image of this draft. Solaris 2.6 has a good implementation. In spite of this, even these systems have only awkard tools for manipulating ACLs. Not the kind of thing you want to be around much, if you have better things to do. But the incompatibility argument applies only to multiple vendor headbutting. Some institutions who share data on a global basis opt for advanced solutions to network filesystems, such as AFS and DFS. Filesystems such as DCE's DFS make extensive use of file ACLs, and they are not operating system specific. Even so, DFS provides only interactive tools for examining and setting file permissions, and this is of little use to system administrators who would rather relegate that sort of thing to a script.
The need for this kind of thing is clear. Systems which make use of ACLs for security can be brought to their knees by changing a few ACLs. Take the Apollo/Domain OS as an example. All one needs to do to kill the system is to change a few ACLs and forget what they were supposed to be. Suddenly the system is crippled, nothing works. The only solution, if you don't have a backup, is to remove all of the security. Unix has a simpler security philosophy when it comes to the operating system files, but ACLs would be a valuable addition to the security of our data.
A cfengine bare-bones file-checking program looks like this:
#
# Free format cfengine program
#
control:
ActionSequence - ( files )
files:
classes::
/directory/file mode=644
owner=mark,ds
group=users,adm
acl=zap
action=fixplain
# ... more below
|
This program simply checks the permissions and ownership of the named
file. The regular file mode, owner and group are specified
straightforwardly. The new feature here is the acl directive. It
is a deceptively simply looking animal, but it hides a wealth of
complexity. The zap is, of course, not an access control
list. Rather, cfengine uses a system of aliases to refer to ACLs, so
that the clutter of the complex ACL definitions does not impair the
clarity of a file command. An ACL alias is defined in a separate part
of the program which looks like this:
# ...contd
acl:
{ zap
method:append
fstype:solaris
user:rmz:rwx
user:len:r
}
|
It is possible to associate several ACL aliases with a file. When cfengine checks a files with ACLs, it reads the existing ACL and compares it to the new one. Files are only modified if they do not conform to the specification in the cfengine program. Let's look at a complete example:
files:
$(HOME)/myfile acl=acl_alias1 action=fixall
acl:
{ acl_alias1
method:append
fstype:solaris
user:len:rwx
}
|
user:*:rwx user:mark:rwx #effective:r-x group:*:r-x #effective:r-x mask:r-x other:r-x default_user:rw- default_group:r-- default_mask:-w- default_other:rwx |
After the cfengine run, the ACL would become:
user:*:rwx user:mark:rwx #effective:r-x user:len:rwx #effective:r-x group:*:r-x #effective:r-x mask:r-x other:r-x default_user:rw- default_group:r-- default_mask:-w- default_other:rwx |
Suppose we wanted to to remove 'w' bit for user `jacobs', or make sure that it was never there.
{ acl_alias1
method:append
fstype:solaris
user:jacobs:-w
}
|
Note that the method used here is append. That means that, whatever other
access permissions we might have granted on this file, the user `jacobs'
(a known cracker) will have no write permissions on the file. Had we
used the method overwrite above, we would have eliminated all
other access permissions for every user and added the above.
If we really wanted to burn `jacobs', we could remove all rights to
the file like this
user:jacobs:noaccess |
The keyword noaccess removes all bits. Note that this is not
necessarily the same as doing a -rwx, since some filesystems,
like DFS, have more bits than this. Then, if we want to forgive and forget,
the ACLs may be removed for jacobs with the syntax
user:jacobs:default |
In Solaris, files inherit default ACLs from the directory they lie in; these are modified by the umask setting to generate their own default mask.
DFS ACLs look a little different. They are examined with the `acl_edit' command or with
dcecp -c acl show <filename> |
In order to effect changes to the DFS, you have to perform a DCE login to obtain authentication cookies. The user `cell_admin' is a special user account for administrating a local DFS cell. Suppose we have a file with the following DCE ACL:
mask_obj:r-x--- user_obj:rwxcid user:cell_admin:r--c-- #effective:r----- group_obj:r-x--d #effective:r-x--- other_obj:r-x--- |
Now we want to add `wx' permissions for user
`cell_admin', and add new entries with `rx' permissons
for group acct-admin and user `root'. This is done with the
following ACL alias:
{ acl_alias2
method:append
fstype:dfs
user:/.../iu.hioslo.no/cell_admin:wx
group:/.../iu.hioslo.no/acct-admin:rx
user:/.../iu.hioslo.no/root:rx
user:*:-x
}
|
The local cell name `/.../iu.hioslo.no' is required here. Cfengine can not presently change ACLs in other cells remotely, but if your cfengine program covers all of the cell servers, then this is no limitation, since you can still centralize all your ACLs in one place. It is just that the execution and checking takes place at distributed locations. This is the beauty of cfengine. After running cfengine, with the above program snippet, the ACL then becomes:
mask_obj:r-x--- user_obj:rwcid user:cell_admin:rwxc-- #effective:r-x--- user:root:r-x--- #effective:r-x--- group_obj:r-x--d #effective:r-x--- group:acct-admin:r-x--- other_bj:r-x--- |
For the sake of simplicity we have only used standard Unix bits `rwx' here, but more complicated examples may be found in DFS. For example,
user:mark:+rwx,-cid |
which sets the read, write, execute flags, but removes the control, insert and delete flags. In the DFS, files inherit the inital object ACL of their parent directory, while new directories inherit the initial container object.
The objects referred to in DFS as user_obj, group_obj
and so forth refer to the owner of a file. i.e. they are equivalent
to the same commands acting on the user who owns the file concerned.
To make the cfengine user-interface less cryptic and more in tune
with the POSIX form, we have dropped
the `_obj' suffices. A user field of `*' is a simple
abbreviation for the owner of the file.
A problem with any system of lists is that one can generate a sequence which does one thing, and then undoes it and redoes something else, all in the same contradictory list. To avoid this kind of accidental interaction, cfengine insists that each user has only one ACE (access control entry), i.e. that all the permissions for a given user be in one entry.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
cron
One of cfengine's strengths is its use of classes to identify systems
from a single file or set of files. Many administrators think that it
would be nice if the cron daemon also worked in this way. One possible
way of setting up cron from a global configuration would be to use the
cfengine editfiles facility to edit each cron file separately. A
much better way is to use cfengine's time classes to work like a user
interface for cron. This allows you to have a single, central cfengine
file which contains all the cron jobs on your system without losing any
of the fine control which cron affords you. All of the usual advantages
apply:
The central idea behind this scheme is to set up a regular cron
job on every system which executes cfengine at frequent intervals.
Each time cfengine is started, it evaluates time classes and
executes the shell commands defined in its configuration file.
In this way we use cfengine as a wrapper for the cron scripts,
so that we can use cfengine's classes to control jobs for mulitple
hosts. Cfengine's time classes are at least as powerful as cron's
time specification possibilities, so this does not restrict you
in any way, See section 6.3 Building flexible time classes. The only price
is the overhead of parsing the cfengine configuration file.
To be more concrete, imagine installing the following `crontab' file onto every host on your network:
# # Global Cron file # 0,15,30,45 * * * * /usr/local/cfengine/inputs/run-cfengine |
This file contains just a single cron job, namely a script which calls cfengine. Here we are assuming that you will not want to execute any cron script more often than every fifteen minutes. If this is too restrictive, the above can be changed. We refer to the time interval between runs of the script `run-cfengine' as the `scheduling interval' and discuss its implications in more detail below.
The script `run-cfengine' would replace any `cfdaily' or `cfhourly' scripts which you might have, and can as simple as this
#!/bin/sh # # Script run-cfengine export CFINPUTS=/usr/local/cfengine/inputs /usr/local/gnu/bin/cfengine # # Should we pipe mail to a special user? # |
or it could be more fancy. You could also use the `cfwrap' script,
if you have perl on all your systems, to pipe mail to the mail address
described in the cfengine file. (See also the variable sysadm in the
Reference manual).
# # Global Cron file # 0,15,30,45 * * * * path/cfwrap path/run-cfengine |
You might not want to run your entire system configuration `cfengine.conf' every time cron fires up cfengine. An alternative would be to keep a separate fil for cron jobs called, say, `cf.cron'. You would then replace the `run-cfengine' file by
#!/bin/sh # # Script run-cfengine export CFINPUTS=/usr/local/cfengine/inputs /usr/local/gnu/bin/cfengine -f cf.cron # # Should we pipe mail to a special user? # |
There is no particular advantage to doing this unless you are running cfengine on some very slow hardware. A better way to approach the problem is to think of the `cf.cron' file as a module which can be imported into the main configuration file. This gives you the maximum amount of flexibilty, since it allows you to decide exactly what you want to happen any any given time from the central file.
6.1 Structuring `cfengine.conf' 6.2 Splaying host times 6.3 Building flexible time classes 6.4 Choosing a scheduling interval
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The structure of `cfengine.conf' needs to reflect your policy for running jobs on the system. You need to switch on relevant tasks and switch off unwanted tasks depending on the time of day. This can be done in three ways:
action:
Hr00.Min10_15||Hr12.Min45_55::
Command
|
actionsequence depending on the
time of day.
control:
Hr00:: # Action-sequence for daily run at midnight
actionsequence = ( sequence )
!Hr00:: # Action-sequence otherwise
actionsequence = ( sequence )
|
import:
Hr00:: cf.dailyjobs
any:: cf.hourlyjobs
|
The last of these is the most efficient of the three, since cfengine does not even have to spend time parsing the files for actions which you know you will not want.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The trouble with starting every cfengine at the same time using a global cron file is that it might lead to contention or inefficiency. For instance, if a hundred cfengines all suddenly wanted to copy a file from a master source simultaneously this would lead to a big load on the server. We can prevent this from happening by introducing a time delay which is unique for each host and not longer than some given interval. Cfengine uses a hashing algorithm to generate a number between zero and a maximum value in minutes which you define, like this:
control:
SplayTime = ( 60 ) # minutes
|
If this number is non-zero, cfengine goes to sleep after parsing its configuration file and reading the clock. Every machine will go to sleep for a different length of time, which is no longer than the time you specify in minutes. A hashing algorithm, based on the fully qualified name of the host, is used to compute a unique time for hosts. The shorter the interval, the more clustered the hosts will be. The longer the interval, the lighter the load on your servers. This `splaying' of the run times will lighten the load on servers, even if they come from domains not under your control but have a similar cron policy.
Splaying can be switched off temporarily with the `-q' or `--no-splay' options.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Each time cfengine is run, it reads the system clock and defines the following classes based on the time and date:
Yrxx::
Month::
Day::
Dayxx::
Hrxx::
Minxx::
Minxx_xx::
Time classes based on the precise minute at which cfengine started are
unlikely to be useful, since it is improbable that you will want to ask
cron to run cfengine every single minute of every day: there would be no
time for anything to complete before it was started again. Moreover,
many things could conspire to delay the precise time at which cfengine
were started. The real purpose in being able to detect the precise
start time is to define composite classes which refer to arbitrary
intervals of time. To do this, we use the group or classes
action to create an alias for a group of time values.
Here are some creative examples:
classes: # synonym groups: LunchAndTeaBreaks = ( Hr12 Hr10 Hr15 ) NightShift = ( Hr22 Hr23 Hr00 Hr01 Hr02 Hr03 Hr04 Hr05 Hr06 ) ConferenceDays = ( Day26 Day27 Day29 Day30 ) QuarterHours = ( Min00 Min15 Min30 Min45 ) TimeSlices = ( Min01 Min02 Min03 Min33 Min34 Min35) |
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
How often should you call your global cron script? There are several things to think about:
Cfengine has an intelligent locking and timeout policy which should be sufficient to handle hanging shell commands from previous crons so that no overlap can take place, See section 7.2.4 Spamming and security.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
This chapter describes how you can set up a cfengine network service to handle
remote file distribution and remote execution of cfengine without having
to open your hosts to possible attack using the rsh protocols.
7.1 Cfengine network services 7.2 How it works 7.3 Configuring cfservd
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
By starting the daemon called cfservd, you can set up a line of
communication between hosts, allowing them to exchange files across
the network or execute cfengine remotely on another system.
Cfengine network services are built around the following components:
cfengine
cfservd
cfrun
cfwatch
With these components you can emulate programs like rdist
whose job it is to check and maintain copies of files on client machines.
You may also decide who has permission to run cfengine and how often it
may be run, without giving away any special user privileges.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
7.2.1 Remote file distribution 7.2.2 Remote execution of cfengine 7.2.3 cfrun7.2.4 Spamming and security 7.2.5 Some points on the cfservd protocol 7.2.6 Deadlocks and runaway loops
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
This section describes how you can set up cfservd as a remote file
server which can result in the distrubution of files to client hosts in
a more democratic way than with programs like rdist.
An important difference between cfengine and other systems has to do
with the way files are distributed. Cfengine uses a `pull' rather than a
`push' model for distributing network files. The rdist command,
for instance, works by forcing an image of the files on one server
machine onto all clients. Files get changed when the server wishes it
and the clients have no choice but to live with the consequences.
Cfengine cannot force its will onto other hosts in this way, it can only
signal them and ask them to collect files if they want to. In other
words, cfengine simulates a `push' model by polling each client and
running the local cfengine configuration script giving the host the
chance to `pull' any updated files from the remote server, but
leaving it up to the client machine to decide whether or not it
wants to update.
Also, in contrast to programs like rdist which distribute files
over many hosts, cfengine does not require any general root
access to a system using the `.rhosts' file or the
`/etc/hosts.equiv' file. It is sufficient to run the daemon as
root. You can not run it by adding it to the `/etc/inetd.conf'
file on your system however.
The restricted functionality of the daemon protects your system from
attempts to execute general commands as the root user using rsh.
To remotely access files on a server, you add the keywork server=host
to a copy command. Consider the following example
which illustrates how you might distribute a password file from a masterhost
to some clients.
copy:
PasswdClients::
/etc/passwd dest=/etc/passwd owner=root group=0 server=server-host
|
cfservd daemon is running on server-host, cfengine
will make contact with the daemon and attempt to obtain information
about the file. During this process, cfengine verifies that the system
clocks of the two hosts are reasonably synchronized. If they are not,
it will not permit remote copying.
If cfengine determines that a file needs to be updated from a remote
server it begins copying the remote file to a new file on the same
filesystem as the destination-file. This file has the suffix `.cfnew'.
Only when the file has been successfully collected will cfengine make a
copy of the old file, (see repository in the Reference manual),
and rename the new file into place. This behaviour is designed to avoid
race-conditions which can occur during network connections and indeed
any operations which take some time. If files were simply copied
directly to their new destinations it is conceivable that a network
error could interrupt the transfer leaving a corrupted file in place.
Cfengine places a timeout of a few seconds on network connections to avoid hanging processes.
Normally the daemon sleeps, waiting for connections from the network.
Such a connection may be initiated by a request for remote files from a
running cfengine program on another host, or it might be initiated by
the program cfrun which simply asks the
host running the daemon to run the cfengine program locally.
Make sure that you are running cfengine from a shell which has sensible limits set. The error `too many open files' can occur in long recursions if you only have a small number of valid descriptors per shell. It is probably a good idea to set the number of descriptors to 1024.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
It is a good idea to execute cfengine by getting cron to
run it regularly. This ensures that cfengine will be run even if you are
unable to log onto a host to run it yourself. Sometimes however you
will want to run cfengine immediately in order to implement a change in
configuration as quickly as possible. It would then be inconvenient
to have to log onto every host in order to do this manually. A better
way would be to issue a simple command which contacted a remote host and
ran cfengine, printing the output on your own screen:
myhost% cfrun remote-host -v output.... |
A simple user interface is provided to accomplish this. cfrun
makes a connection to a remote cfservd-daemon
and executes cfengine on that system with the privileges of the
cfservd-daemon (usually root). This has a two advantages:
A potential disadvantage with such a system is that malicious users might be able to run cfengine on remote hosts. The fact that non-root users can execute cfengine is not a problem in itself, after all the most malicious thing they would be able to do would be to check the system configuration and repair any problems. No one can tell cfengine what to do using the cfrun program, it is only possible to run an existing configuration. But a more serious concern is that malicious users might try to run cfengine repeatedly (so-called `spamming') so that a system became burdened with running cfengine constantly, See section 7.2.4 Spamming and security.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
cfrun
The syntax of the cfrun command is
cfrun -option --longoption class1 class2 ... |
With the exception of the `-d' and `-S' options, all options are passed on to the remote hosts and are ignored locally. The `-q' option is always assumed when executing cfengine remotely, so that SplayTime is effectively zero when polling hosts serially. If an option includes a name such as `-Dnewclass', there should not be a space between the option letter and the name string. The remaining options are treated as classes to be sent to all the hosts on the network.
Each host evaluates the classes sent by cfrun
and decides whether cfengine should be invoked.
Only hosts which belong to the classes defined on the cfrun
command line are executed. This allows you to single out groups of hosts
which should execute cfengine, based on the very classes which you have
defined for your configuration. If no classes are sent on the command
line, then all hosts are run.
cfrun uses a configuration file which is located under the
CFINPUTS directory in order to determine which hosts and in
which order it should try to connect. Because cfengine always uses a
reliable TCP protocol for connections, it verifies each connection
rather than simply broadcasting openly. Using this file you can even
simulate broadcasting to hosts outside your subnet.
This file should contain every host name you ever want to
configure remotely, because you can still select subsets of
the file by specifying classes which the remote host will understand.
If the remote host is not in one of the classes you specify when you
run cfrun, then it will simply ignore the request. Conversely,
if you do not place a host in this file, it will never be contacted
when you use the cfrun command. The format of the file
is as follows
# # Comment .. # domain=my.domain access=user1,user2 hostname1 options hostname2 options ... |
It is important to add the domain-name to this file. The options you specifiy in this file, per host, are added to those you might specify on the command line when invoking cfengine remotely. For instance, you might know of a bug on one host and decide not to perform interface configuration on that one machine. You would write a line like this:
funny.domain -i # problem host |
You could use cfrun inside one of your cfengine configuration
files in order to remotely execute cfengine on all of the other
network machines, by setting up a host list. Be careful not to
include the name of the master host in the list. The locks should
prevent cfengine from being run on the masterhost, avoiding an
infinite loop. This way you do not have to rely on cron running
on every system. The disadvantage however is that cfengine
has to poll the systems on the network, which means that cfengine
cannot be working in parallel on all hosts. This could be
inefficient in the long run.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The term `spamming' refers to the senseless repetition of something in a malicious way intended to drive someone crazy(5). In the computer world some malicious users, a bit like `flashers' in the park(6) like to run around the net a reveal themselves ad nauseum by sending multiple mail messages or making network connections repeatedly to try to overload systems and people(7).
Whenever we open a system to the network, this problem becomes a concern. Cfengine is a tool for making peace with networked systems, not a tool to be manipulated into acts of senseless aggression. The cfengine daemon does make it possible for anyone to connect and run a cfengine process however, so clearly some protection is required from such attacks.
Cfengine's solution to this problem is a locking mechanism. Rather than providing user-based control, cfengine uses a time based locking mechanism which prevents actions from being executed unless a certain minimum time has elapsed since the last time they were executed. By using a lock which is not based on user identity, we protect several interests in one go:
Cfengine is controlled by a series of locks which prevent it from being run too often, and which prevent it from spending too long trying to do its job. The locks work in such a way that you can start several cfengine processes simultaneously without them crashing into each other. Coexisting cfengine processes are also prevented from trying to do the same thing at the same time (we call this `spamming'). You can control two things about each kind of action in the action sequence:
You can set these values either globally (for all actions) or for each action separately. If you set global and local values, the local values override the global ones. All times are written in units of minutes.
actionsequence
(
action.IfElapsedtime-in-mins
action.ExpireAftertime-in-mins
)
|
or globally,
control:
IfElapsed = ( time-in-mins )
ExpireAfter = ( time-in-mins )
|
For example:
control:
actionsequence =
(
files.IfElapsed240.ExpireAfter180
copy
tidy
)
IfElapsed = ( 30 )
|
In this example, we treat the files action differently to the others. For all the other actions, cfengine will only execute the files part of the program if 30 minutes have elapsed since it was last run. Since no value is set, the expiry time for actions is 60 minutes, which means that any cfengine process which is still trying to finish up after 60 minutes will be killed automatically by the next cfengine which gets started.
As for the files action: this will only be run if 240 minutes (4 hours) have elapsed since the last run. Similarly, it will not be killed while processing `files' until after 180 minutes (3 hours) have passed.
These locks do not prevent the whole of cfengine from running, only so-called `atoms'. Several different atoms can be run concurrently by different cfengines. Assuming that the time conditions set above allow you to start cfengine, the locks ensure that atoms will never be started by two cfengines at the same time, causing contention and wasting CPU cycles. Atoms are defined to maximize the security of your system and to be efficient. If cfengine were to lock each file it looked at seperately, it would use a large amount of time processing the locks, so it doesn't do that. Instead, it groups things together like this:
copy, editfiles, shellcommands
netconfig, resolve, umount, mailcheck, addmounts, disable, processes
mountall, mountinfo, required, checktimezone
Cfengine creates a directory `~/.cfengine' for writing lock files for ordinary users.
The option `-K' or `--no-lock' can be used to switch off the
locking checks, but note that when running cfengine remotely via cfservd,
this is not possible.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfservd uses a form for host-based authorization. Each atomic operation, such as statting, getting files, reading directories etc, requires a new connection and each connection is verified by a double reverse lookup in the server's DNS records. Single stat structures are cached during the processing of a file.
MD5 checksums are transferred from client to server to avoid loading the server. Even if a user could corrupt the MD5 checksum, he or she would have to get past access control with TCP wrappers and the worst that could happen would be to get the right version of the file. Again this is in keeping with the idea that users can only harm themselves and not others with cfengine.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Whenever we allow concurrent processes to share a resource, we open ourselves up the possibilty of deadlock. This is a situation where two or more processes are locked in a vicious stalemate from which none can escape. Another problem is that it might be possible to start an infinite loop: cfengine starts itself.
Cfengine protects you from such loops to a large
degree. It should not be possible to make such a loop by accident.
The reason for this is the locking mechanism which prevents tasks
being repeated too often. If you start a cfengine process which
contains a shell-command to start cfengine again, this shell
command will be locked, so it will not be possible to run it
a second time. So while you might be able to start a second
cfengine process, further processes will not be started and
you will simply have wasted a little CPU time. When the first
cfengine returns, the tasks which the second cfengine completed
will not be repeated unless you have set the IfElapsed time
or the ExpireAfter time to zero.
In general, if you wish to avoid problems like this, you
should not disable the locking mechanism by setting these two
times to zero.
The possibility of deadlock arises in network connection. Cfengine will
not attempt to use the network to copy a file which can be copied
internally from some machine to itself. It will always replace the
server= directive in a copy with `localhost' to avoid unnecessary
network connections.
This prevents one kind of deadlock which could occur: namely cfrun
executes cfengine on host A (cfservd on host A is then blocked until this
completes), but the host A configuration file contains a remote copy
from itself to itself. This remote copy would then have to wait for cfservd
to unblock, but this would be impossible since cfservd cannot unblock until
it has the file. By avoiding remote copies to localhost, this possibility
is avoided.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
cfservd
7.3.1 Installation of cfservd7.3.2 Configuration file `cfservd.conf' 7.3.3 TCP wrappers
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
cfservd To install the cfengine daemon component, you will need to register a port for cfengine by adding the following line to the system file `/etc/services file'
cfengine 5308/tcp |
editfiles:
{ /etc/services
AppendIfNoSuchLine "cfengine 5308/tcp"
}
|
# Start cfengine server cfservd |
Note that cfservd will reread its configuration file whenever
it detects that it has been changed, so you should not have to restart
the daemon, not send it the HUP signal as with other daemons.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The server daemon is controlled by a file called `cfservd.conf'. The syntax of this configuration file is deliberately modelled on cfengine's own configuration file, but despite the similarities, you cannot mix the contents of the two files.
Though they are not compatible, `cfengine.conf' and `cfservd.conf' are similar in several ways:
CFINPUTS.
groups and import in both files
to break up files into convenient modules and to import
common resources, such as lists of groups.
Host name authentication is not by class or group but by hostname, like the `/etc/exports' file on most unix systems. The syntax for the file is as follows:
control:
classes::
domain = ( DNS-domain-name )
cfrunCommand = ( "script/filename" ) # Quoted
AutoExecCommand = ( "cfengine-start-script" )
AutoExecInterval = ( 60 )
MaxConnections = ( maximum number of forked daemons )
ChecksumDatabase = ( filename )
IfElapsed = ( time-in-minutes )
DenyBadClocks = ( false )
AllowConnectionsFrom = ( IP numbers )
DenyConnectionsFrom = ( IP numbers )
AllMultipleConnectionsFrom = ( IP numbers )
LogAllConnections = ( false/true )
SkipVerify = ( IP numbers )
groups:
Group definitions
import:
Files to import
admit: | grant:
classes::
/file-or-directory
wildcards/hostnames
deny:
classes::
/file-or-directory
wildcards/hostnames root=hostlist secure=true/on
|
The file consists of a control section and access information. You may use the control section to define any variables which you want to use in the remainder of your file. Two variables are special here, they are reserved.
cfrunCommand
cfrun command.
AutoExecCommand
AutoExecInterval.
Since the output route is ambiguous for a daemon, you should
provide a wrapper for cfengine which mails you the output, just as you
would with cron. This script should not normally produce any output
itself. Any output will go to syslog.
AutoExecInterval
IfElapsed so that
unnecessary overlap is avoided.
MaxConnections
IfElapsed
IfElapsed anti-spamming filter is also built into
cfservd so that a remote user cannot even get as far as
causing cfengine to parse its input files (which could
be used for spamming in itself). The time is in minutes,
the default is one hour.
ChecksumDatabase
DenyBadClocks
off, cfservd will not deny access to clients whose
clocks are off by more than one hour. The default is to deny access to
systems whose clocks differ by more than one hour. This can prevent
messages of the form `Can't stat' file when remote copying.
AllowConnectionsFrom
control:
AllowConnectionsFrom = ( 128.39.89 192.2.0.10 )
|
DenyConnectionsFrom
Hosts which are included by the allow-list above can be explicitly denied access using this list.
control:
DenyConnectionsFrom = ( 128.39.89.76 ) # rogue host
|
AllowMultipleConnectionsFrom
This replaces the AllowMultipleConnections boolean variable which existed in version 1.5.4 (only).
SkipVerify
If connecting hosts use a Network Address Translator in order to share an IP address, reverse lookup will fail to give a correct verification of host identity. You can switch off cfservd's verification of host identity for specific IP addresses or patterns using this command. E.g.
SkipVerify = ( 192.0.0.10 192.0.2. ) |
NOTE!! This is a security risk because it means that cfservd implicitly trusts the connecting hosts! You should be very careful in using Network Address Translators in a secure environment. It is not recommended for sites which require a high level of security.
LogAllConnections
root=
secure=truesecure, i.e. on an encrypted
link. This presupposes that cfengine has been compiled with
a working DES or SSLeay library.
Following the control section comes a list of files or directories and hosts which may access these. If permissions are granted to a directory then all sub directories are automatically granted also. Note that symbolic links are not checked for, so you may need to specifically deny access to links if they are plain files, but cfservd does not follow symbolic links and give access to files in other directories.
Fully qualified hostnames should be given in this file. Do not forget to
define the domain name. Authentication calls the unix function
gethostbyname() and so on to identify and verify connecting
hosts, so the names in the file must reflect the type on names returned
by this function. You may use wildcards in names to match, for instance,
all hosts from a particular domain.
Here is an example file
#####################################################
#
# This is a cfservd config file
#
#####################################################
groups:
PasswdHost = ( nexus )
#####################################################
control:
#
# Assuming CFINPUTS is defined
#
cfrunCommand = ( "/usr/local/bin/cfengine" )
variable = ( /usr/local/publicfiles )
#####################################################
admit: # Can also call this grant:
PasswdHost::
/etc/passwd
*.iu.hioslo.no
FtpHost::
# An alternative to ftp, grant anyone
/local/ftp/pub
*
any::
$CFINPUTS/cfrun.sh
*.iu.hioslo.no
#####################################################
deny:
/etc/services
borg.iu.hioslo.no
/local/ftp
*.pain-in-the-ass.com
|
NOTE I: cfservd is not rpc.mountd, access control is by filename,
not by device name. Do not assume that files lying in subdirectories are
not open for access simply because they lie on a different device. You should
give the real path name to file and avoid symbolic links.
NOTE II: access control is per host and per user. User names are assumed to be common to both hosts. There is an implicit trust relationship here. There is no way to verify whether the user on the remote host is the same user as the user with the same name on the local host.
If you still have problems with lack of access, it could be that you have forgotten to define the domain name for your network, or that you do not understand the TCP wrappers files `/etc/hosts.access' and `/etc/hosts.deny'.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine tries to incorporate the TCP wrappers package if you have it on your system. If you do, then the files `/etc/hosts.allow' and `/etc/hosts.deny' allow you to give the cfengine/cfservd service an extra level of protection from `clever' spoofing attempts.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
8.1 Security hints 8.2 Checksum Databases 8.3 Whom do you trust? 8.4 Firewalls
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine is not specifically a tool for implementing high security solutions for system administration, but it has many features which can be used to monitor the state of your systems and warn about potential breaches in security. Here are some suggestions as to how you can be more security conscious with cfengine's help.
files feature, it will make
a note of setuid programs it finds there. These are recorded in the
file `cfengine.host.log' which is stored under `/etc/cfengine' or
`/var/log/cfengine'.
When new setuid programs are discovered, a warning is printed, but only
if you are root. If you ever want a complete list, delete the log
file and cfengine will think that all of the setuid programs it finds
are new. The log file is not readable by normal users.
ChecksumDatabase
files you can set the option checksum=md5 which
will result in the md5 value of the named file being cached in
a database for future reference. If the file changes in any way
this will be registered and a security warning will be issued. This
gives cfengine behaviour like Tripwire.
files, tidy, copy), it is on the lookout for
suspicious filenames, i.e. files like `.. .' containing only space
and/or dots. Such files are never created by sensible people, but are
often used by hackers to try to hide dangerous programs. Cfengine
prints warnings about such files. The variable list FileExtensions
may be used to detect concealed directories during these searches,
if
users create directories which look like common files.
cfservd program attempts to unmask such
attempts by performing double reverse lookups in the name service. This
verifies by a trusted server that the socket address and the host name
are really who they claim to be. If you have the TCP wrappers package
on your system (libwrap)
then cfservd will attempt to use it to detect other spoofs too, See section 7.3.3 TCP wrappers. If you don't have TCP wrappers, then the only line of
defense is the double reverse lookup.
size= in copy
useshell= in shellcommands
IFS
variable to treat '/' as a separator. You can ask cfengine to start
programs directly, without involving an intermediary shell, by setting
the useshell variable to false. The disadvantage is that you will
not be able to use shell directives such as `|' and > in
your commands.
warnnonusermail and warnnonownermail in control
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine can be used to check for changes in files which only something as exacting as an MD5 checksum/digest can detect. If you define a checksum database and activate checksum verification,
control: ChecksumDatabase = ( /etc/cfengine/cache.db ) files: /filename checksum=md5 .... |
NOTE! Warnings are usually unecessary. If you are worried about the
integrity of the system then don't bother warning about checksum
mismatches here. Make an md5 copy comparison with a read only
medium which has correct versions of the program on it. That way if a
binary is compromised you will not only warn about it but also repair
the damage immediately!
The control variable ChecksumUpdates may be switched to on
in order to force cfengine to update its checksum database after
warning of a change.
The default value of this variable is off for cfengine but on for cfservd.
This is because cfservd uses a database as a cache, while cfengine uses
it as a security check.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
All the developments of the last few years point to the unpleasant fact that we need to be extra security conscious on the net. In order to have any meaningful discussion about security, you need to determine who you trust and who you don't trust. No one from outside your network can force cfengine to do anything you don't want it to do (unless root access to your system has been compromised by another route), but you might decide to collect a file from a remote server which could sabotage your system a treat. Cfengine does not implement more exacting security than normal host validation. If you are collecting files from remote servers, you should make sure that they come from a machine that you trust, particularly if they are files which could lead to privileged access to your system. Cfengine places the responsibility on you. You can make cfengine destroy your system, but no one else can, so make sure you think about what you are doing.
For example, it would be an extremely foolish idea to copy a binary program such as `/bin/ps' from a host you know nothing about. This program runs as root. If someone were to replace that version of `ps' with a trojan horse command, you would have effectively opened your system to attack.
In remote copies you are setting up an implicit trust relationship. First of all you trust integrity of the host you are collecting files from. Secondly you trust that they have the same username database with regard to access control. The root user on the collecting host has the same rights ro read files as the root user on the server. The same applies to any matched user name. A non-matched username has the same rights as nobody.
Cfengine performs no cryptographic coding of messages at present, so if you are sending sensitive data via cfengine, it should be coded in advance.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
Cfengine is a useful tool for implementing, monitoring and maintaining firewalls. You can control what programs are supposed to be on the firewall and what programs are not supposed to be there. You can control file permissions, processes and a dozen other things which make up the configuration of a bastion host. At some point in the future this space might expand into a discussion about how you set up a bastion host using cfengine.
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
| Jump to: | !
"
$
'
-
/
`
A B C D E F H I M O R S T U |
|---|
| Jump to: | !
"
$
'
-
/
`
A B C D E F H I M O R S T U |
|---|
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
| Jump to: | !
-
.
/
A B C D E F G H I L M N O P Q R S T U V W Y |
|---|
| Jump to: | !
-
.
/
A B C D E F G H I L M N O P Q R S T U V W Y |
|---|
| [ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
| Jump to: | B C D H I M P S T W |
|---|
| Jump to: | B C D H I M P S T W |
|---|
| [Top] | [Contents] | [Index] | [ ? ] |
On some systems, core dumps cannot be switched off!
This unique naming scheme was suggested to me originally by Knut Borge at USIT of the University of Oslo.
Note: if the filesystem was in the fstab but not actually mounted a warning is issued telling you that the filesystem was probably not exported correctly on host1.
One possibility is that an NFS filesystem cannot be mounted because the host serving the filesystem is out of service. If this is the case then a subsequent re-run when the server resumes normal service will succeed.
Recall the `spam' song from Monty Python's flying circus?
Recall the `spam' song from Monty Python's flying circus?
Recall the `spam' song ... get the idea?
| [Top] | [Contents] | [Index] | [ ? ] |
1. AUTOMATED SYSTEM ADMINISTRATION
2. Overview
2.1 What is cfengine and who can use it?3. Getting started
2.2 Site configuration
2.3 Key Concepts
2.3.1 Control files2.4 Functionality
2.3.2 Network interface
2.3.3 Network File System (NFS) or distribution?
2.3.4 Name servers (DNS)
2.3.5 Monitoring important files
2.3.6 Making links
3.1 What you must have in a cfengine program4. More advanced concepts
3.2 Program structure
3.3 Optional features in cfengine
3.4 Invoking cfengine
3.5 CFINPUTS environment variable
3.6 What to aim for
4.1 Classes5. Designing a global system configuration
4.2 Variable substitution
4.3 Undefined variables
4.4 Defining classes and making exceptions
4.4.1 Command line classes4.5 The generic class
4.4.2 actionsequence classes
4.4.3 shellcommand classes
4.4.4 Feedback classes
4.4.5 Writing plugin modules
any
4.6 Debugging tips
4.7 Access control
4.8 Wildcards in directory names
4.9 Recursive file sweeps/directory traversals
4.10 Log files written by cfengine
4.11 Quoted strings
4.12 Regular expressions
4.13 Iterating over lists
5.1 General considerations6. Using cfengine as a front end for
5.2 Using netgroups
5.3 Files and links
5.4 Copying files
5.5 Managing processes
5.6 Cfengine's model for NFS-mounted filesystems
5.6.1 NFS filesystem resources5.7 Using the automounter
5.6.2 Unique filesystem mountpoints
5.6.3 How does it work?
5.6.4 Special variables
5.6.5 Example programs for mounting resources
5.8 Editing Files
5.9 Disabling and the file repository
5.10 Running user scripts
5.11 Compressing old log files
5.12 Managing ACLs
cron
6.1 Structuring `cfengine.conf'7. Cfengine and network services
6.2 Splaying host times
6.3 Building flexible time classes
6.4 Choosing a scheduling interval
7.1 Cfengine network services8. Security and cfengine
7.2 How it works
7.2.1 Remote file distribution7.3 Configuring
7.2.2 Remote execution of cfengine
7.2.3cfrun
7.2.4 Spamming and security
7.2.5 Some points on the cfservd protocol
7.2.6 Deadlocks and runaway loops
cfservd
7.3.1 Installation ofcfservd
7.3.2 Configuration file `cfservd.conf'
7.3.3 TCP wrappers
8.1 Security hintsVariable Index
8.2 Checksum Databases
8.3 Whom do you trust?
8.4 Firewalls
Concept Index
FAQ Index
| [Top] | [Contents] | [Index] | [ ? ] |
1. AUTOMATED SYSTEM ADMINISTRATION
2. Overview
3. Getting started
4. More advanced concepts
5. Designing a global system configuration
6. Using cfengine as a front end forcron
7. Cfengine and network services
8. Security and cfengine
Variable Index
Concept Index
FAQ Index
| [Top] | [Contents] | [Index] | [ ? ] |
| Button | Name | Go to | From 1.2.3 go to |
|---|---|---|---|
| [ < ] | Back | previous section in reading order | 1.2.2 |
| [ > ] | Forward | next section in reading order | 1.2.4 |
| [ << ] | FastBack | previous or up-and-previous section | 1.1 |
| [ Up ] | Up | up section | 1.2 |
| [ >> ] | FastForward | next or up-and-next section | 1.3 |
| [Top] | Top | cover (top) of document | |
| [Contents] | Contents | table of contents | |
| [Index] | Index | concept index | |
| [ ? ] | About | this page |